Question about 2000 Dodge Durango
Open the passenger frunt door,, Where the corner of the dash sits out in the open when the door is open there is a small cover here,pull on where you can put a finger in the panle and the panle will come off , The panel snaps back into place,
Posted on Jul 17, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Feb 15, 2016 | 2004 Oldsmobile Alero
Jul 11, 2009 | 2004 Lincoln Navigator
Sep 26, 2014 | Cars & Trucks
1. The passenger compartment fuse
It is located on the driver's side
under the instrument panel.
2. The power distribution box
It is located on the driver's side of the engine
They contain the main fuses and
the main relays. The circuits
protected are identified by
numbers on the passenger
compartment fuse panel and inside
the cover on the power distribution
Oct 27, 2011 | 1999 Mercury Mystique
The driver's side fuse block is to the left of the steering
wheel, under the instrument panel.
Snap off the cover to reveal the fuses. You'll find a fuse
puller clipped to the inside of the cover. Place the wide
end of the fuse puller over the plastic end of the fuse.
Squeeze the ends over the fuse and pull it out.
Passenger's Side Fuse Block
Additional fuses are located in the relay center, on the
passenger's side, below the instrument panel. You must
remove the sound insulator on the right side of the
passenger footwell to replace these fuses.
Since the replacement of these fuses can be difficult,
we recommend that you see your dealer for
Sep 24, 2010 | 1999 Buick LeSabre
Sep 20, 2010 | Chevrolet Malibu Cars & Trucks
May 18, 2010 | 2004 Ford Expedition
Oct 11, 2009 | 1998 Ford Contour
Oct 03, 2009 | 2003 Chevrolet Malibu
47 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: