Question about 2003 Mitsubishi Lancer

1 Answer

Spark plugs i was wondering where the spark plugs are located on the motor? i own a 2003 lancer es 4 door. any help,maybe a diagram,would be appreciated.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,187 Answers

You really do not need a diagram to locate the spark plugs. If you can see the high tension wires (thick electrical wires) connected to the distributor and to the to of the engine, just follow it up to the top of the engine where you can pull it out. It should reveal a whole in which inside is the spark plug. If your engine has a cover on the top (made of hard plastic), you may have it removed to gain better access.

Posted on Jul 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My car is missing need the wireing diagram for a 2003 mitsubishi galant es 2.4 ltr.


From the timing belt to the transmission the fireing orders are 1234 One and three fired the same time 2 and 4 fire the same time. Pull all the plugs for the spark plug on them and lay them across the top of the motor with plugs in them you can see which ones fire at what time. The spark plugs need to be touching a grounded part of the engine to fire. This also will help you find out if you have bad wires.

Apr 01, 2014 | 2003 Mitsubishi Galant

1 Answer

2003 mitsubishi galant fuse box and relay location and diagram


where is the blinker/hazard relay on an 03 mitsu lancer es

May 14, 2012 | 2003 Mitsubishi Galant

1 Answer

2003 Mitsubishi Lancer es question cant figure out


Unfortunately, I do not think you will be able to use the flush kit on your car. There are two lines with very short hoses. The one you are looking for is only a few inches long. SORRY.

Jun 16, 2011 | 2003 Mitsubishi Lancer

2 Answers

Torque settings for 2005 lancer es fly wheel gearbox etc


2.0L Evolution engine

flywheel bolts 132 =/- 5 N.m. 98 +/- 3 ft lbs.

transmission to engine bolts 48 +/- 6 N.m. 36 +/- 4 ft lbs.

2.0L Non- Evolution engine

flywheel bolts 98 +/-5 N.m. 72 +/- 3 ft lbs.

transmission to engine bolts 48 +/- 6 N.m. 36 +/- 4 ft lbs.

2.4L Ralliart engine

flywheel bolts 132 +/- 5 N.m. 98 +/- 3 ft lbs.

transmission to engine bolts 48 +/- 6 N.m. 36 +/- 4 ft lbs.

Dec 28, 2010 | 2005 Mitsubishi Lancer

1 Answer

My lancer has engine hesitation, when i hit the


good day Sir, try to check the fuel filter and maybe the spark plugs i hope this tips will help you.

Jul 05, 2010 | 2003 Mitsubishi Lancer

1 Answer

I TO KNOW HOW TO GET THE SPARK PLUGS OFF AND WHERE THE OIL FILTER IS LOCATED. I CAN SEE THINGS THAT RESEMBLE SPARK PLUGS BUT I CANT SEEM TO GET THEM OFF. ALSO THE NEW PLUGS I GOT FROM REPCO HAVENT GOT THE...


spark plugs do not come with wires you have to purchase them separately you have to remove plug wires one ata ime and then remove plugs but make sure you mark each wire as to which plug you removed it rfrom and also when removing from distributor cap mark the wires there as well

Dec 22, 2009 | 2003 Toyota RAV4

1 Answer

Side mirror replacement


open the passenger side door there should be a plastic cover usually a flathead screwdriver will remove it once that is removed there should be 3 or 4 bolt to remove and a power cable remove all and replace. good luck

Jan 20, 2009 | 2003 Mitsubishi Lancer

2 Answers

2003 Mitsubishi Lancer


so u have a CH/CG lancer

you would need to remove the two 10mm bolts from the coil packs and leads and then stick the smaller version of spark plug socket in remove them, bear in mind if u have a mivec motor the spark plugs MUST be Platinum :)

Oct 21, 2008 | 2003 Mitsubishi Lancer

1 Answer

2003 Mitsubishi Lancer


basic rules.

1 remove the cable.
2. use the right size socket and insert it to the plug.
3. loosen the plug and clean or replace.
4. tighten it back.
5. do it one at a time. it would be confusing to install the wires back if you pull them at the same time.

tnx 4 using fixya and tnx 4 asking,

drcool

Oct 21, 2008 | 2003 Mitsubishi Lancer

Not finding what you are looking for?
2003 Mitsubishi Lancer Logo

354 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...