1997 honda accord se need to change vss,where

For 1997 Honda Accord 2.2L MFI 4cyl the Vehicle Speed Sensor - Location is located mounted on transmission.

OPERATION
The Vehicle Speed Sensor (VSS) is a magnetic pick-up sensor that sends a signal to the Powertrain Control Module (PCM) and the speedometer. The sensor measures the rotation of the output shaft on the transaxle and sends an AC voltage signal to the PCM that determines the corresponding vehicle speed.



TESTING

1. Disconnect the negative battery cable.
2. Disengage the wiring harness connector from the VSS.
3. Using a Digital Volt-Ohmmeter (DVOM), measure the resistance (ohmmeter function) between the sensor terminals. If the resistance is 190-250 ohms, the sensor is okay.

1. Disconnect the negative battery cable.
2. Disconnect the three terminal connector from the vehicle speed sensor (VSS).
3. Remove the fasteners that secure the VSS to the transaxle housing assembly.
4. Remove the VSS.

1. Install the VSS.
2. Install the mounting bolts.
3. Connect the three terminal connector to the sensor.
4. Connect the negative battery cable.