Question about Jeep Grand Cherokee

1 Answer

I need a timing chain diagram for a 2002 jeep grand Cherokee with a 4.0L engine

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Contributor
  • 245 Answers

This is the procedure on it.


i need a timing chain diagram for a 2002 jeep - spacer.gif 2008-10-22_16144i need a timing chain diagram for a 2002 jeep - spacer.gifgif spai need a timing chain diagram for a 2002 jeep - spacer.giflass= spacer.gif View Full Image spacer.gif

INSTALLATION

NOTE: Assemble the timing chain, crankshaft sprocket and camshaft sprocket with the timing marks aligned Fig. 5 .

  1. Apply Mopar(TM) Silicone Rubber Adhesive Sealani need a timing chain diagram for a 2002 jeep - spacer.gifeyway in the crankshaft and insert the key With the key in the keyway on the crankshaft, install the assembly on the crankshaft and camshaft.

2008-10-22_161528_2.thumb.gif spacer.i need a timing chain diagram for a 2002 jeep - spacer.gif= spacer.gif View Full Image

Insti need a timing chain diagram for a 2002 jeep - spacer.gifmshaft sprocket retaining preloai need a timing chain diagram for a 2002 jeep - spacer.gif washer Fig. 6 . Tighten the preload boli need a timing chain diagram for a 2002 jeep - spacer.gif8 N.m (80 ft. lbs.) torque.





spacer.gif 2008-10-22_161605_3.thumb.gif spacer.gif spacer.gif View Full Image spacer.gif


  • To verify correct installation of the timing chain, turn the crankshaft to position the camshaft sprocket timing mark as shown in Fig. 7 . Count the number of chain pins between the timing marks of both sprockets. There must be 15 pins. NOTE: Installation of the timing chain with the timing marks on the crankshaft and camshaft sprockets properly i need a timing chain diagram for a 2002 jeep - spacer.gifsures correct valve timing. A worn or stretched timing chain will adversely affect valve timing. If the timing chain deflects more than 12.7 mm (1/2 inch) 48 pins. A chai need a timing chain diagram for a 2002 jeep - spacer.gifre than 48 pins will cause excesi need a timing chain diagram for a 2002 jeep - spacer.gif.
  • Install the crankshaft oil i need a timing chain diagram for a 2002 jeep - spacer.gif
  • Replace the oil seal in the timing case cover.
  • Lubricate the tension spring, thrust pin and pin bore in the preload bolt with Mopar(TM) Engine Oil Supplement, or equivalent. Install the spring and thrust pin in the preload bolt head Fig. 6 .


    spacer.gif 2008-10-22_161701_4.thumb.gif spacer.gif spacer.gif View Full Image spacer.gif


  • Install the timing case cover and gasket.
  • With the key installed in the crankshaft keyway, install the vibration damper, washer and bolt. Lubricate and tighten the bolt to 108 N.m (80 ft. lbs.) torque.
  • Install the serpentine drive belt and tighten to the specified tension, Refer to Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair for the proper procedure.
  • Install the fan and hub (or Temporal fan) assembly. Install the shroud.
  • Connect negative cable to battery
  • Posted on Jul 16, 2010

    Testimonial: "thank you "

    • Steve Hart
      Steve Hart Jul 16, 2010

      Here is the timing marks sorry they seam not to show up on my post

    ×

    5 Suggested Answers

    6ya6ya
    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    Hi,
    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
    click here to download the app (for users in the US for now) and get all the help you need.
    goodluck!

    Posted on Jan 02, 2017

    SOURCE: setting timing on a 2002 jeep grand cherokee

    how do you set the timing on jeep laredo 2002?

    Posted on Oct 18, 2008

    • 41 Answers

    SOURCE: Jeep Grand Cherokee Service engine light soon on

    A loose gas cap will sometimes trigger the service light to come on.  Since this appears to have happened on multiple occasions I can assume that this is not the problem but may be associated with it.  The level of gas in the tank affects the amount of atmospheric pressure in the tank. There are multiple things that could set off the light, one being a loose or defective gas cap, and the other is a fuel vapor return valve.  I'm not sure of the exact type of fuel system you have so I cant give a more exact answer.  If you wanted to give something a shot before bringing it into the shop, you can simply replace the gas cap first, a very cheap try. 

    Posted on Dec 12, 2008

    • 52 Answers

    SOURCE: 2002 Jeep Grand Cherokee timing belt/chain replacement (not 4WD)

    I BELIEVE THAT IT HAS A TIMING CHAIN. IT SHOULD BE CHANGED AT OR ABOUT 100,000 MILE. BUT IT DOESN'T NECESSARILY NEED TO BE CHANGED THEN, JUST INSPECTED.

    Posted on May 06, 2010

    issahanabii
    • 79 Answers

    SOURCE: i need timing belt or chain diagram from Jeep

    sorry ican disclosed the diagram to you.but you can please contact the nearby autozone for one.thankyou

    Posted on Aug 09, 2010

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    I need to see a the timing chain diagram marks for a 2004 jeep cheaper v8


    we posted this here 100s of times, ever search?
    the book is free, posted 300 times, i think.
    4.7L say it , that is what it is.
    no clue as to
    cheaper



    click here, and see the full 2005 book with same engine
    wk or wj. a grand cherokee. every step, huge engine chapter, no lack of facts,

    http://www.morris4x4center.com/knowledge-base/index.htm?utm_source=cj#service





    Jul 14, 2016 | Jeep Cars & Trucks

    1 Answer

    Color wire diagram for 2002 grand jeep cherokee oil sending unit plug


    first off , the the book is free.
    posted here 100s of times, endless....
    here one more time.
    chapter 8w covers all that. on all.GC.
    WJ jeep that is.

    oil sender of what, engine or trans.>>>>?????


    it really is , all there.


    http://www.morris4x4center.com/knowledge-base/index.htm?utm_source=cj#service


    free as a bird.. RTM !

    Nov 24, 2015 | 2002 Jeep Grand Cherokee Limited

    1 Answer

    Service timing chains diagram


    Head pulls, are in alldata.com every day, just login and read.
    RTM
    the free one is here, it has index error (i reported it)
    but the chapter you want is there, called "ENGINE"

    http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

    Mar 11, 2014 | 2002 Jeep Grand Cherokee

    1 Answer

    How do i know if my 95 jeep grand cherokee laredo 4.0 inline 6 is an interference engine


    You have a timing chain that is good for the life of the engine. The only thing that could need replacing is the chain tensioner if it starts to make noise.

    Jan 31, 2014 | 1995 Jeep Grand Cherokee

    1 Answer

    Timing chain r/r on 4.7 jeep cherokee 2003


    Here are some diagrams that may help.
    11_6_2012_5_12_51_pm.gif11_6_2012_5_13_35_pm.gif

    Nov 06, 2012 | 2004 Jeep Grand Cherokee

    1 Answer

    I need timing belt or chain diagram from Jeep Grand Cherokee Laredo 2002


    sorry ican disclosed the diagram to you.but you can please contact the nearby autozone for one.thankyou

    Aug 09, 2010 | 2002 Jeep Grand Cherokee

    1 Answer

    2002 Jeep Grand Cherokee timing belt/chain replacement (not 4WD)


    I BELIEVE THAT IT HAS A TIMING CHAIN. IT SHOULD BE CHANGED AT OR ABOUT 100,000 MILE. BUT IT DOESN'T NECESSARILY NEED TO BE CHANGED THEN, JUST INSPECTED.

    May 06, 2010 | 2002 Jeep Grand Cherokee

    1 Answer

    Timing chain diagram


    Just wrap the chain around the gears and lineup the dots. dot to dot and put them on. That's how it goes. The timing itself is not adjustable. It's controlled by the engines computer. It's that simple.

    Apr 27, 2009 | 1990 Pontiac Grand Am

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    1,429 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Jeep Experts

    yadayada
    yadayada

    Level 3 Expert

    75117 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7772 Answers

    Are you a Jeep Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...