Question about 2000 Chevrolet Silverado

2 Answers

I HAVE A 2000 CHEVY SIVERADO 1500 2 WHEEL DRIVE AUTO TRANS. 3 DR. CREW CAB WITH 5.3 LITER 223 V8 IT VIBRATES REALLY BAD WHEN I START SLOWING AND STOPING I REPLACED THE DRIVER SIDE HUB ASSEMBLY BUT I DONT KNOW FOR SURE WHAT IT IS COULD IT BE BRAKES HUB ROTORS SHOCKS WHAT THANX MY EMAIL IS FERGUSON.CHRIS55@YAHOO.COM

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 447 Answers

I agree with Jaisen23. Most likely warped brake rotors causing this, especially if the surging or shuddering ceases when you release the brake pedal. Worn tie rod ends or other steering parts can increase the effect so have those parts looked at too. Good luck!

Posted on Jul 16, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

  • Expert
  • 151 Answers

Sounds like it could very well be your brakes, have someone look at your rotors and brake pads. This could be the cause of your vibration

Posted on Jul 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Ford F-350 Super Duty 4 Dr Lariat Crew Cab wont shift into reverse


is it a standard trans. or an automatic
if standard it sounds like a broken or bent shifter fork
if auto. u have a broken reverse band

Feb 24, 2014 | 2000 Ford F350 Super Duty Super Cab

1 Answer

How to change the oil in the four wheel drive transfer case for a 2000 chevy 1500 v8 5.3 liter


get under the truck, there is a drain plug and a fill plug at the transfer case which is at rear of the transmission, the drive shaft comes out the backk of the case, refill with ATF Type DEXRON VI

Apr 30, 2010 | 2000 Chevrolet Silverado 1500

3 Answers

Firing order on a 1996 chevy 1500


You didn't mention the engine, so here are all options...

4.3 liter V-6 VIN "W" With Enhanced Ignition System
6094a7b.gif

1996 Chevrolet C 1500 P/U 2WD
5.0 liter V-8 VIN "M OR

1996 Chevrolet C 1500 P/U 2WD
5.7 liter V-8 VIN "R "

624b9ea.gif



Oct 18, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

How do i remove the ignition swicth from a 2004 chevy siverado 1500


The procedure to remove the ignition switch is
  1. Start by disconnecting you negative battery cable.
  2. Wait at least 1 minute to disable your airbag system.
  3. Remove the airbag from the steering wheel, it's retained by a couple bolts on the back of the steering wheel.
  4. Disconnect the wires to it, and set it aside.
  5. Remove the clip that is above the lock nut for the steering wheel, then remove the lock nut.
  6. You need a steering wheel puller to pull the steering wheel off. After you remove the steering wheel, you should have access to the turn signal switch.

Sep 18, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab

1 Answer

2004 1500 chevy siverado with a/c problems


Check movement of vent doors on that side. Sounds like they aren't moving over as they should. (Or hose fell off on passenger side.)

Aug 21, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab

2 Answers

What engines will fit in my 2000 gmc jimmy


the only engine that your truck has available is the 4.3 Liter V6, u can install a 4.8 liter V8 or a 5.3 liter V8, but that would be very complicated and costly and u would have trouble getting it certified to pass smog inspections

Apr 07, 2009 | 2000 GMC Jimmy

Not finding what you are looking for?
2000 Chevrolet Silverado Logo

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...