Question about 2001 Ford Focus
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 27, 2017 | Ford Cars & Trucks
May 26, 2008 | 2004 Ford Taurus
May 12, 2015 | Audi 100 Cars & Trucks
First pull the timing belt tensioner then slip the belt off the cam gears. You then need to find TDC (Top dead center). 3 ways to find TDC 1) There are marks on the crank pulley align them for TDC. 2) Remove timing cover and use crank gear mark seen in link below 3) Put the dip stick in cylinder 1 and turn engine until dip stick stops going up. After finding TDC align cam gear marks seen in link below. Now make sure both cam and crank stay in position and slip timing belt back on (you can move the cam gear to get the belt on but make sure the marks are aligned after the belt is on). Last tighten the belt tensioner, I usually use my finger or an extension to get some more tension on the belt. You might have to remove engine mount bracket makes life much easier as the front cover section is TIGHT !!!. Turn engine a few times to make sure you have compression and engine turns without getting stuck. See link below good luck.
Jul 08, 2014 | 2002 Mazda 626
Apr 18, 2014 | 1997 Geo Tracker 2 Door
Sep 23, 2011 | 1994 Buick LeSabre
Sep 03, 2011 | 1992 Acura Legend
Aug 24, 2011 | Ford Focus Cars & Trucks
179 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: