Question about 1999 Ford Expedition

1 Answer

Blower motor does not work . Reat a/c works fine.

Posted by on

  • yadayada
    yadayada Jul 15, 2010

    HAVE U TESTED THE BLOWER WITH A 12 VOLT JUMPER CABLE?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Ford Master
  • 959 Answers

Replace the front blower motor after you have tested it and found it defective .
Test it by disconnecting the wire / plug on it and jumping a pos. wire to it. Debris may have jammed it up too... when you remove it from the plenum test it again and clean the plenum of nuts and debris.

Posted on Jul 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blower Motor Not Working properly


check "amp" at the blower motor! if the "amp" its to high , you better replace the blower motor! It will damge your blower control module soon also!!

Mar 15, 2016 | Cars & Trucks

1 Answer

Blower Motor on 2000 Saturn SL


The blower motor is connected to a termic switch, when the motor is fine and fuse is ok, is the switch that must be replaced.

Ensure the fuse is ok first.

Oct 02, 2008 | 2002 Ford Crown Victoria

1 Answer

2003 Toyota Corolla AC Blower/Fan will not turn on, I replaced the Blower/Fan a few weeks ago,


A/c compressor works fine and the blower motor works and shutdown right? it is the problem with the blower resistor or with blower motor relay. try to direct the resistor irrespective of the speed. hope the problem may be solved.

Jun 05, 2014 | 2003 Toyota Corolla

1 Answer

2002 grand caravan blower motor intermittent replaced resistor


in review
the fan speed resistor is new
you bench tested the blower motor
12 volts test ..only runs it at full speed
if cabin filer want changed the blower motor would run hotter

could be the motor brushes or bush/motor bearing when slowed
you might want to inspect the brushes and clean the dust out of the motor
if no better
does that have climate control ?
might be the fan switch itself or the earth isnt so good

pm9193-front-vpok4bnazo4imyyhqje4rxo2-4-0.jpg

images-vpok4bnazo4imyyhqje4rxo2-4-1.jpg

Apr 01, 2017 | 2000 Dodge Grand Caravan

1 Answer

Morgan spa. pumps work fine blower indicator on, but blower wont come on


experience proves that the blower motor is subject to water getting into the motor and burning it out or rusting it up Comes from over filling normally. Remove and inspect the motor.May have to replace the motor

Jan 12, 2013 | Cars & Trucks

1 Answer

I have a 2004 Honda Accord and the heater and air conditioner blower motor does not work. Have checked the fuses and they are all fine and have checked the cabin filter and it is alright. What else can I...


CHECK BLOWER MOTOR RELAY. HOT WIRE BLOWER MOTOR.IF BLOWER MOTOR WORKS, PROBLEM IN THE BLOWER CONTROL SWITCH OR FAULTY RELAY.IF BLOWER MOTOR DONT WORK WHEN HOT WIRED.BLOWER MOTOR FAULTY.

May 30, 2011 | 2004 Honda Accord

1 Answer

Blower working on top 2 settings but no air comeing from vents


Hi

Thanks for using FixYa. The possible causes due to which the blower is not working normally are fuse, blower resistor or a bad blower motor. Test the voltage at the blower with a test light. Please check the motor relay switch fuse under the dashboard. Use a multi meter to measure ohms for continuity. If these are fine, bypass the blower motor relay switch to make sure blower motor is running fine. Motor relay switch is right next to radiator fan relay switch under the hood. Pull out the blower motor relay switch to see 4 female pin holes. Test the relay switch using a 12 volts power source and a multi meter to measure continuity. If fan works after jumping the pin holes, then blower motor is fine but relay switch may be faulty. You may also need to replace the blower motor resistor. If still the problem persists, then you need to replace the blower motor.

Please do rate the solution and revert for further assistance.


Thanks
Rylee

Aug 09, 2009 | 1997 Honda Civic

3 Answers

BLOWER FAN NOT WORKING PROPERLY


I had the same problem change your blower motor resistor.

Nov 13, 2008 | 2006 Chevrolet Trailblazer

1 Answer

Blower Motor not working


hello the problem your having with the blower motor sound like the blower itself the brushes could be worn out causing the extra load on the blower resistor you may need to have a blower motor installed hopefully you won't need the resistor hope this helps you



workitover

Jul 24, 2008 | 1997 BMW 328

Not finding what you are looking for?
1999 Ford Expedition Logo

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...