Question about Cars & Trucks
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
JUST RELEASE THE PRESSURE AT THE FUEL PRESSURE TEST PORT ON THE FUEL SUPPLY RAIL THAT SUPPLIES THE INJECTORS, IT IS A METAL VALVE LIKE A TIRE VALVE, THAT IS THE FACTORY RECOMMENDED METHOD..
Posted on Mar 11, 2009
If you mean actually replacing the ignition switch on the vehicle with a locking column. You need to do this. Dicconnect the battery, remove the lower panel of the dash if there is any. There is a bolt on the steering column near the fire wall on most vehicles, remove this bolt, it will release the spline on the steering column. Disconnect all wiring going to the column, unbolt the column from the dash support. Remove the column from the truck, on the ignition switch you will see where the two shear bolts screw the assembly together, center punch the center of each bolt. Now drill the bolt with a 1/8" drill about 1/4" to 3/8" deep. Now use a 3/8" drill and drill out the shear head until it comes off the bolt. You can now remove the switch assembly from the column. The new assembly should come with new shear off bolts so when you bolt it in place when tightned they will break off rendering it tamperproof again. Most vehicles are designed like this now to stop theft. Check the column for operation before reinstalling it in the reverse of above. You just want to make sure the key locks and unlocks the column before reinstalling in the vehicle. You may want to do this before you totally tighten the bolts and break them off permanently. Good luck, RAC
Posted on Apr 14, 2009
Hello! The fuel pump relay switch is located on the firewall under a plastic cover...It is a black plastic 1"x1"
switch...It is designed to operate the fuel pump for 3-8 seconds when you turn the ignition switch on, to prime the injector rail...
Posted on Feb 27, 2010
Tips for a great answer:
Jan 06, 2018 | Mazda Cars & Trucks
Apr 14, 2011 | 1988 Mazda B2200
Jan 09, 2011 | 1988 Mazda B2200
Jul 09, 2010 | 1988 Mazda B2200
Jun 04, 2009 | 1988 Mazda B2200
Apr 29, 2009 | 1988 Mazda B2200
Mar 25, 2009 | 1988 Mazda B2200
Dec 03, 2008 | 1988 Mazda B2200
Jul 31, 2008 | 1988 Mazda B2200
62 people viewed this question
Usually answered in minutes!