Question about 2000 Toyota MR2 Spyder
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2003 MR2 will not idle
I had the same problem. My check engine light was on. Took it to the dealer and they checked the code. It was the throttle control motor failure. The good news is I got the wiring wet and that seem to be the problem. They reset the check engine light and it runs fine now. Bad news is if I had to get the motor replaced they said it would be about $1300.00 I hope things work out for you.
Posted on Oct 18, 2008
Here is what is going on. When you push in the clutch pedal you remove the connection between the engine and the transmission. At this time all the parts in the transmission stop rotating.Since the only parts in the transmission that can rotate without moving the car are the input parts we can safely assume that the noise can only be from there.This can be a transmission input bearing. Worn Synchro mechanism (allows the transmission to shift without grinding the gears)Low fluid in the tranny. Or a bad clutch component. Top off or change the fluid. If it still makes the noise you need to take it to a tranny shop.
Posted on Nov 30, 2008
Your vehicle’s computer system has self-testing capability. When the computer senses that there is a problem with one of the components or sensors it stores the correspondent trouble code(s) in its memory and lights up the "Check Engine" or "Service Engine Soon" light to tell you that there is a problem and you need to diagnosed and repaired it. The list of possible codes number in the hundreds. The code itself doesn't tell exactly what component is defective - it only indicates where to look, or what engine parameter is out of normal range. You or a technician will have to perform further testing to pinpoint cause and the proper repair. If the light is flashing there is a severe failure of the emission-control system that is causing the engine to misfire to the point that the catalytic converter is damaged each time the Check Engine Light flashes. Even if you reset the light, if the underlying problem is not addressed it will come back on.
Posted on Apr 01, 2009
Tips for a great answer:
Oct 07, 2012 | 2000 Toyota MR2 Spyder
Sep 03, 2010 | 2000 Toyota MR2 Spyder
Aug 03, 2010 | 2002 Toyota MR2 Spyder
Jun 19, 2009 | 2003 Toyota MR2 Spyder
Mar 23, 2009 | 2002 Toyota MR2 Spyder
Mar 16, 2014 | 2000 Toyota MR2 Spyder
61 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: