Question about 1992 Nissan Pickup

Open Question

My son has a 1994 Toyota pickup with a 2.4L 4 Cyl 22RE engin. it blows black soot and runs awful. Plugs O2 sensor and tail pipe are covered in black soot. we have changed the O2 sensor cat plugs oil filter air filter mass air flowplugs oil wires and cleaned the injectors. Still runs rough & blows black soot out the exhaust. anyone have a clue?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Nissan b14 rough idle, black smoke

i have a nissan b-14 idle roughly sometimes cut off when in traffic. any solutions???????

Posted on Dec 01, 2009

Ad
  • 506 Answers

SOURCE: ITS A 1994 NISSAN PICKUP, THE ENGINE TURNS OVER

Black smoke is an indication that your engine is running too rich. There could be a problem with the timing. Since the starter will crank and you have checked for spark and fuel delivery I would say the only thing left is your timing. If you have never adjusted timing it is not something you can just go out and do. Check your distributor cap and points.

Posted on Feb 04, 2010

  • 14585 Answers

SOURCE: idels rough and goes away at driving seeds

Check all of the vacuum lines and hoses

Posted on Jun 17, 2010

  • 1 Answer

SOURCE: My 1997 Nissan King Cab pickup wont run!

i have had the same problem and it was my mass air flow sensor. and dont by the whole kit from the deal cause it was like 500 buck and you can order one from ebay for like 70

Posted on Jan 05, 2011

c1apton15
  • 3400 Answers

SOURCE: The check engine light came

Have Autozone do a free scan for your codes. Their scanner can also reset your light. FREE

Posted on Mar 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1987 toyota pickup 22re engine,w


Usually a sign the fuel mixture is too rich. Could be a problem with the injector, O2 sensor, air filter, or other things.

Jul 06, 2013 | Cars & Trucks

1 Answer

93' toyota pickup 4wd 4 cylinders 22re, sputters when given throttle


Low fuel pressure can cause this or a clogged filter, has the fuel pressure been checked? Has the fuel filter ever been changed?

Feb 13, 2013 | 1994 Toyota Pickup

1 Answer

94 toyota pickup 22re just replaced distributor plugs wires ignitor cleaned egr wasstopped up at little pipe on side vsv and mass constuntly pull vacum at idle could this be head gasket no water in oil no...


If your having idling problems from what i can tell of your post and the egr vsv (vacuum switching valve) has vacuum on both sides holding open the egr you need to check power at connector if ground and 12v present replace vsv

Aug 08, 2011 | 1994 Toyota Pickup

1 Answer

WHAT IS THE TORQUE ON THE HEAD FOR 94 TOYOTA PICK UP ITS A 4 CYL 2.4 22R


Here's the manual's engine section for the 22RE:

http://www.ncttora.com/fsm/1993/engine.html

see: cylinder head & specifications

Jul 04, 2011 | 1994 Toyota Pickup

4 Answers

My 1983 toyota pickup runs rough and black soot come from exhaust


carb automatic choke sticking closed or your float setting too high causing flooding engine.

Nov 19, 2009 | 1983 Toyota Pickup

2 Answers

2.5 4 cyl engine Code P0171....Black Soot in the exahaust and water...Black soot on the plugs. I have replaced the catc and muffler, MAP sensor, coolant temp sensor, coil, plugs, wires, dist cap,cleaned...


Black soot in water? You mean water in the tailpipe or black soot in the coolant in the radiator? Have you tested the manifold air temp sensor and the throttle position sensor? If they were OK, you may just have worn injectors that are allowing a bit too much fuel flow or a bad spray pattern. In the meantime, you could try replacing the plugs with a set that is one heat range hotter. If the plugs become slightly fouled, that can cause a snowball effect which makes the situation worse.

Nov 11, 2009 | 1997 Jeep Wrangler

1 Answer

1991 toyota 3L V6 Overfueling, raw fuel pouring out exhaust pipes


check if your O2 sensor is working that is the thing telling computer how much fuel to put into motor it is on pipe close to motor your O2 sensor tests how much oxygen is pipe while running and tells to increase or lean back fuel

May 26, 2009 | 1994 Toyota Pickup

1 Answer

Install 02 sensor,92 pick up 22re,automatic,4cyc.


you will need an o2 sensor tool you can get one at eney auto part store. first disconect the 3 or 4 prog wire form the o2 sensor place tool and remove some toyota trucks have them on the exost manifolds some of them on the exost pip just be for the catolitek converter.

May 18, 2009 | 1992 Toyota Pickup

4 Answers

1994 toyota 22re 4x4 pickup fuel injector wiring diagram


the color of the plastic plug does not matter... You will have two injector plugs with white/red and yellow wires - those two go to cyl#'s 1 and 3.
the other two plugs will have white and blur wires.. those two plugs go to injectors # 2 and 4.

Oct 09, 2008 | 1994 Toyota Pickup

Not finding what you are looking for?
1992 Nissan Pickup Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...