Question about 1999 Volvo V70

1 Answer

My shift interlock will not release - 1999 Volvo V70

Posted by on

  • bodinekeeper Jul 15, 2010

    thanks for the help ended up pulling the shift cylinoid out all together

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,016 Answers

Hi,

First check the fuse in the fuse box under the bonnet in the engine area, it is the fuse box on the right hand side against the windscreen.
Check these fuse's 11C/1, 11C/36, 11C/18, 11C/29.
If these are ok then you got a problem with either your ignition switch or the interlock solenoid on the gear lever.

If you are able to check these other 2 faults, then please get back to me and I can give you the information you need.


Thanks

Jason

Posted on Jul 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2006 lincoln zephyr and I can't get key out of ignition


Does it have floor shifter ? Shift interlock system .
Diagnostic Trouble Code (DTC) Chart
DTC Component Description Condition Symptom Action B2572 Brake Shift Interlock Brake Shift Interlock Output Circuit Failure The associated circuitry connected to the smart junction box (SJB) or fuse, or the SJB itself may have an issue causing a brake shift interlock concern. Brake shift interlock is inoperative or does not operate correctly. Go To Pinpoint Test A .
SYMPTOM CHART Condition Possible Sources Action
  • Shift interlock system does not release/lock correctly
  • Circuitry open/shorted
  • Fuse(s)
  • Stoplight switch
  • Go To Pinpoint Test A .
  • Shift interlock system does not release/lock correctly
  • Shift lock actuator
  • INSTALL a new selector lever assembly. REFER to Selector Lever in this section.

Do you have a scan tool ? Not a code reader .

Aug 25, 2017 | Lincoln Cars & Trucks

1 Answer

94 merc grandmarkee wont go into park wont start will start if you wiggle in nutral


Park neutral safety switch could be bad , also the shift interlock safety system .
Shift Interlock System A brake/shifter interlock system consists of the following:
  • ignition switch (11572)
  • brake pedal stoplight switch (13480)
  • brake shift interlock module
  • brake shift interlock solenoid assembly (attached to key interlock assembly)
  • necessary wiring
On floor-shift vehicles, the ignition/shifter interlock cable (3F719):
  • locks the floor shift transaxle range selector lever in the PARK position when the ignition switch is in the LOCK position.
  • requires the floor shift transaxle range selector lever to be in the PARK position to turn the ignition switch to the LOCK position.
Condition Possible Source Action
  • Shift Interlock System Does Not Release or Lock Properly
  • Circuitry open/shorted.
  • Blown fuse.
  • Damaged stoplight switch.
  • Damaged shift lock actuator.
  • GO to Pinpoint Test A .

PINPOINT TEST A: SHIFT INTERLOCK SYSTEM DOES NOT RELEASE OR LOCK PROPERLY A1 CHECK ELECTRON IGN FUSE
  • Check Fuse 5 (5A) located in fuse junction panel.
Is fuse OK?
Yes No GO to A3 . GO to A2 . A2 CHECK FOR SHORT TO GROUND
  • Turn ignition switch OFF.
  • Remove Fuse 5 (5A).
  • Disconnect shift-lock actuator connector C203 located to the right of steering column.
  • Measure resistance of the Circuit 1003 (GY/Y) between the correct terminal of Fuse 5 (5A) and ground.
Is resistance greater than 10,000 ohms?
Yes No REPLACE Fuse 5 (5A). GO to A3 . SERVICE Circuit 1003 (GY/Y) wire between fuse junction panel and shift-lock actuator. A3 CHECK POWER SUPPLY FROM FUSE 5 (5A)
  • Reinstall Fuse 5 (5A).
  • Turn ignition switch to RUN.
  • Measure voltage on Circuit 1003 (GY/Y) wire and ground.
Is voltage greater than 10 volts?
Yes No GO to A4 . SERVICE Circuit 1003 (GY/Y) wire between interior fuse panel and shift-lock actuator. A4 CHECK POWER SUPPLY FROM FUSE 28 (15A)
  • Turn ignition switch OFF.
  • Disconnect connector C2016.
  • Turn ignition switch ON.
  • Measure voltage on Circuit 10 (LG/R) and ground.
Is voltage B+?
Yes No GO to A5 . SERVICE Circuit 10 (LG/R) for open. RESTORE vehicle and RETEST system. A5 CHECK WIRE BETWEEN STOPLIGHT SWITCH AND SHIFT-LOCK ACTUATOR
  • Turn ignition switch OFF.
  • Disconnect shift-lock actuator connector C203.
  • Apply brake pedal.
  • Measure voltage on Circuit 810 (R/LG) wire and ground.
Is voltage greater than 10 volts with brake pedal applied and less than 1 volt with brake pedal released?
Yes No GO to A6 . SERVICE Circuit 810 (R/LG) wire between stoplight switch and shift-lock actuator. A6 CHECK SHIFT-LOCK ACTUATOR GROUND
  • Measure resistance of Circuit 57 (BK) and ground.
Is resistance less than 5 ohms?
Yes No REPLACE shift-lock actuator. SERVICE BK wire.

Mar 30, 2017 | Cars & Trucks

1 Answer

My 2007 Lincoln MKZ gear shifter is getting stuck in park and comes out after trying a little while, not every time but its increasing more and more.


On your vehicle there is a shifter interlock system ,it's a safety feature . Doesn't allow shifter to be put into gear if your foot isn't on the brake pedal .
Visual Inspection Chart Mechanical Electrical
  • Transmission shift cable
  • Manual control lever
  • Transmission control module out of adjustment (6-speed transaxle)
  • Fuse
  • Connections
  • Wiring harness
  • Brake pedal position (BPP) switch
  • Shift lock actuator
  • Transmission control (TC) switch (MKZ)
Diagnostic Trouble Code (DTC) Chart
DTC Component Description Condition Symptom Action B2572 Brake Shift Interlock Brake Shift Interlock Output Circuit Failure The associated circuitry connected to the smart junction box (SJB) or fuse, or the SJB itself may have an issue causing a brake shift interlock concern. Brake shift interlock is inoperative or does not operate correctly. Go To Pinpoint Test A . Symptom Chart
SYMPTOM CHART Condition Possible Sources Action
  • Shift interlock system does not release/lock correctly
  • Circuitry open/shorted
  • Fuse(s)
  • Stoplight switch
  • Go To Pinpoint Test A .
  • Shift interlock system does not release/lock correctly
  • Shift lock actuator
  • INSTALL a new selector lever assembly. REFER to Selector Lever in this section.
PINPOINT TEST A: THE SHIFT INTERLOCK SYSTEM DOES NOT RELEASE/LOCK CORRECTLY Test Step Result / Action to Take A1 TEST THE BRAKE LIGHTS
  • Apply the brake pedal and view the brake lights.
  • Do the brake lights illuminate?
Yes
GO to A2 .

No
REFER to Section 417-01 . A2 TEST SHIFT INTERLOCK ACTUATOR POWER CIRCUIT
  • Disconnect: Floor Shifter Harness Connector C3245.
  • Key in ON position.
  • Vehicles equipped with a 3.0L or a 2.3L engine, measure the voltage between floor shifter harness connector C3245-1, vehicle harness side and ground, while applying the brake pedal.
    s7s~tr~en~file=n0042138.gif~gen~ref.gif
  • Vehicles equipped with a 3.5L engine, measure the voltage between floor shifter harness connector C2096-1, vehicle harness side and ground, while applying the brake pedal.
    s7s~tr~en~file=n0053796.gif~gen~ref.gif
  • Is the voltage greater than 10 volts?
Yes
GO to A3 .

No
REPAIR the circuit. TEST the system for normal operation. A3 TEST SHIFT INTERLOCK ACTUATOR GROUND CIRCUIT
  • Key in OFF position.
  • Vehicles equipped with a 3.0L or a 2.3L engine, measure the resistance between floor shifter harness connector C3245-4, vehicle harness side and ground.
    s7s~tr~en~file=n0042139.gif~gen~ref.gif
  • Vehicles equipped with a 3.5L engine, measure the resistance between floor shifter harness connector C2096-5, vehicle harness side and ground.
    s7s~tr~en~file=n0053797.gif~gen~ref.gif
  • Is the resistance less than 5 ohms?
Yes
INSTALL a new selector lever. REFER to Selector Lever in this section.

No
REPAIR the circuit. TEST the system for normal operation. Don't try to force it , you'll break something !

Sep 22, 2016 | 2007 Lincoln MKZ

1 Answer

2010 merc gm shift lever stuck in park car will start steering wheel turns


You have a shift interlock problem . What kind of vehicle ? a mercury what ?
Shift Interlock System
The shift interlock system prevents shifting from PARK unless the brake pedal is depressed. The shift interlock system consists of a shift lock actuator mounted on the selector lever. If the ignition switch is in the RUN position, the shift lock actuator is disabled when the brake pedal is depressed.
If the selector lever will not move out of PARK with the key in the ON position and the brake pedal depressed, it will need to be unlocked manually.
Do the brake lights work ?
Visually inspect for obvious signs of mechanical and electrical damage; refer to the following chart:

Visual Inspection Chart Mechanical Electrical
  • Damaged shift lock actuator
  • Damaged transmission control (TC) switch
  • Damaged shift interlock switch
  • Failed fuse(s):
    • F20 (10A)
    • F22 (15A)
  • Damaged wiring harness
  • Loose or corroded connections
  • Damaged shift interlock switch
Symptom Chart Condition Possible Sources Action
  • Shift interlock system does not release/lock correctly
  • Circuitry
  • Fuse(s):
    • F20 (10A)
    • F22 (15A)
  • Brake pedal position (BPP) switch
  • Brake shift interlock actuator
  • Brake shift interlock actuator module
  • Go To Pinpoint Test A .
PINPOINT TEST A: SHIFT INTERLOCK SYSTEM DOES NOT RELEASE/LOCK CORRECTLY Test Step Result / Action to Take A1 TEST THE BRAKE LIGHTS
  • Apply brake pedal and view brake lights.
  • Do brake lights illuminate?
Yes
GO to A7 .

No
GO to A2 . A2 TEST FUSE F22 (15A)
  • Key in OFF position.
  • Check fuse: Smart Junction Box (SJB) Fuse F22 (15A).
  • Is the resistance less than 5 ohms?
Yes
GO to A4 .

No
GO to A3 . A3 TEST THE CIRCUIT FOR A SHORT TO GROUND
  • Key in OFF position.
  • Disconnect: Brake Pedal Position (BPP) Switch.
  • Measure the resistance between pin 1 and ground.
    s7n~tr~en~file=n0039468.gif~gen~ref.gif
  • Is the resistance greater than 10,000 ohms?
Yes
GO to A4 .

No
REPAIR circuit for short to ground. TEST the system for normal operation
Do

Jun 19, 2016 | 2010 Mercury Grand Marquis

1 Answer

Brake lockout cable connected to the shift interlock latch


Need more details.
Dodge Charger RT & SRT have weak plastic shifter assemblies. The brake interlock works first to let you move the shifter to the right. Then the shift interlock needs to release to let you shift down the gate. I can tell you how to get by until you can replace the assembly if you give more information than just a title.

Aug 22, 2012 | 2006 Dodge Charger

1 Answer

The shift interlock button wont release the gear shift to go in park or drive


Its a simple fix - you just need to put your right hand underneath the dash, under the ignition switch with the stuck key, and feel around for the stiff transmission-shift-lock cable, and just giggle it about a bit. Try all directions, don't be aggressive with it; and eventually you will be able to turn the key to the LOCK position. Good luck

I took the cover off the steering column by removing 4 screws. (I had to remove the dash by removing 2 screws behind the Hood release and yanking the cover off. This is how you gain access to the two forward most bolts on the steering column cover.) From hear you should see the shift interlock on the top right of the sterring column. Pull the white lever to release the key lock. Turn the key to lock and remove your key.
I would then purchase a new interlock and replace it.

Mar 23, 2012 | 1999 Isuzu Rodeo

1 Answer

Car stuck in park took cap off near gear shift to release it but when you put it back in park same problem . brake light switch not working


the brake light switch needs to be repaired first before you can accurately diagnose the shift interlock system. the brake light switch sends power to the shift interlock solenoid for the gearshift to release from the park position.

Jul 30, 2011 | Honda Pilot Cars & Trucks

1 Answer

I have a 1999 Ford Escort and this morning could not get the silly thing to shift out of park. The release button on the shifter will not push in to move the shifter into drive or any other gear


These cars have a shift interlock switch that prevents the car from being shifted out of park if you don't depress the brake. If your brake lights work, then the switch it good. It isn't uncommon that the interlock solenoid fails. The solenoid moves the lock release when you depress the brake. If you look on the side of the console you can see a notch cut out. You can put a screwdriver in there to push the interlock and shift it from park. Of course, you don't want to do this all the time so you either need to replace the interlock solenoid (last I checked they were about $150) or just defeat the solenoid with a zip tie. The only problem with the zip tie is that you don't have to depress the brake to shift it from park and it can be shifted from park even if the key is not in it. Your owners manual will have better detail and pictures of the interlock and where to put the screwdriver to manually shift it from park.

Dec 28, 2010 | 1999 Ford Escort

1 Answer

Key stuck


Hello. Your problem is in the area called Brake Transmission Shift Interlock (BTSI). The shifter assembly in the console has a switch-solenoid (shift interlock) that has to send a release signal to the key release solenoid in the steering column. Replacement of the shifter assembly or shift interlock solenoid normally resolves the problem. regards, Joe

Jan 05, 2010 | 2002 Pontiac Grand Prix

Not finding what you are looking for?
1999 Volvo V70 Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...