Question about Land Rover Defender

Open Question

Land rover defender 2.4 tdci belt diagram

I need a land rover defender 2.4 tdci serpentine belt diagram

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 88 Answers

SOURCE: Land rover Defender 90 cigarette lighter install

should only be a black for earth and red or yellow for power if u already have wired up to a powr source just connect to back of lighter if you dont ground the black wire to the mwal part of the car usually under a screw under the dash will do and run a red wire to 10a fuse in fuse box thats the easiest way

Posted on Jun 06, 2009

Ad
  • 112 Answers

SOURCE: help me with my land rover defender 90 engine

what do u need help on?

Posted on Jun 09, 2009

  • 129 Answers

SOURCE: which serpentine belt do I need for my 2001 Land Rover Discovery

I have responded to this problem in the past. 2001 discos had an ACE (Active Cornering Enhancement) option. ACE vehicles had an additional hydraulic pump for the system therefore ACE vs Non_ACE cars require different belts.

Posted on Sep 21, 2009

bschilz
  • 2049 Answers

SOURCE: looking for serpentine belt diagram land rover discovery 1996

Here is the diagram you asked for...


29faae3.jpg
Please be sure to give a positive rating for this answer. Thanks...

Posted on Feb 17, 2010

  • 1024 Answers

SOURCE: I need a serpentine belt routing diagram for a

here's you go, hope this help.


0219580.gif

Posted on May 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to put belts on a 1994 land rover defender and what kind of belts to put on


Use good quality belts from the list of manufacturers out there, Gates is very good and so is Goodyear.

Jun 12, 2016 | 1994 Land Rover Defender

1 Answer

2000 Range Rover 4.6 serpentine belt diagram Belt slipped off, how do I fix it?


The big Belt for the AC,Cooling,Auternator etc. slept off. I stopped the car imediatly. Range Rover P38 1999. The Engine sounds still healthy. Will there be big damage after all?

Dec 13, 2010 | 2000 Land Rover Range Rover

1 Answer

I need the serpentine belt routing for a 98 land rover discovery. 4.0 with air and everything. Thanks


The serpentine belt routing diagram for a 1998 Land Rover Discovery 4.0 liters with A/C

tdisline_9.jpg
CS = Crankshaft
F = Fan pulley
G = Guide pulley

Gen = Alternator
HP = Hydraulic Pump
T = Tensioner
AC = Air Conditioning
PAS = Power Assisted Steering

Nov 16, 2010 | 2001 Land Rover Discovery Series II

1 Answer

1) I have bought a Land Rover Defender 2007 bulk head. On the ECU I have the following numbers under the top bar code the number is 7H12-12C520-BF and under the smaller bar code. S/N *YJRSVOANPWC8* Can...


Those numbers refer to that piece specifically.
The chassis serial is usually in a plate on the windshield.
Check the owner's manual for instructions on where to locate.
Some scanners to do fault diagnosis, has option of chassis serial information

May 13, 2017 | Land Rover Defender Cars & Trucks

1 Answer

Unsure if this is the paint part number BTR0171


if yours is a defender 110 then thats a rare machine .. there were only 500 in the country. ..
here is some good info on identifying all land rovers
http://www.roverparts.com/How_to_Identify_Rover.cfm

this is info on your defender
http://www.roverparts.com/Model/Defender110.cfm

under ..body parts.. they show lots of stuff for land rovers but little for your model since its so rare.
they claim they have a full line of parts for the defender so maybe a call to them might hit pay dirt

some interesting stuff about the defender here including some colors ..
http://en.wikipedia.org/wiki/Land_Rover_Defender#Special_editions

here is some paint colors for 93 land rovers
http://www.automotivetouchup.com/choosecolor/choosecolor.aspx?year=1993&make=Land+Rover&model=All+Models

this gives the color as alpine white and gives instructions on how to find paint codes
http://www.roverparts.com/Parts/PPNUC.cfm

maybe too much information but everything about that machine is so interesting .. and it still has high value .. maybe a classic

1993 land rover defender specs
http://www.parkcity4x4classics.com/index.php/specs/defender

a forum on the defender
http://forum.landrovernet.com/forumdisplay.php/69-Land-Rover-Defender/page3?order=desc

Feb 19, 2010 | 1993 Land Rover Defender

1 Answer

Looking for serpentine belt diagram land rover discovery 1996


Here is the diagram you asked for...


29faae3.jpg
Please be sure to give a positive rating for this answer. Thanks...

Feb 17, 2010 | 1995 Land Rover Discovery

1 Answer

How do i change drive belt on p38 range rover


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.

Not sure if this what you need for the "P38" but it is for the 1996 Range Rover.

I do not know if you still need this information, but I am going ahead and answering it anyway.


Click on the following Link. It has the several Serpentine Belt Diagrams, one of which matches your specific vehicle with your particular options (AC, Power Steering etc..).

Regarding HOW:
Standard Rule to Removal the Serpentine Belt:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Rotate/Move the Tensioner away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys
.
Standard Rules for Installing the Serpentine Belt:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.

b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.
Let me know if this helped...

http://www.2carpros.com/car_repair_information/year/1996/make/land_rover/model/range_rover/1996_land_rover_range_rover_drive_belt_routing_diagram.htm

Feb 12, 2010 | 1996 Land Rover Range Rover

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...