Question about 2006 Mitsubishi Sigma

Open Question

Driver side elect window not working mit 380 sx series 3

Driver side elect window not working mit 380 sx series3

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

fknstart
  • 404 Answers

SOURCE: Driver side power window stops working in 2003 mits. eclipse

the switches need cleaning ,they have contacts in them that get dirty you can spray contact cleaner on them or use emery paper to file them, they are not to hard to pull apart

Posted on Jan 16, 2009

  • 291 Answers

SOURCE: Drivers side window and power lock does not work

check the wires in the door jam that connect the door to the chassis.. where they bend evertime open and close the door sometimes cause the wires to break

Posted on Apr 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix 2006 Pt cruiser elect window driver side front


You need to figure out if it is a bad switch, wire, supply voltage, or motor. Then replace the bad part.

Sep 26, 2014 | 2006 Chrysler PT Cruiser

1 Answer

Rear passenger window drivers side wont work - mitsubishi 380


hi

380 Mitsubishi's have a electric window regulator problem


front and back regulators are notorious for breaking and failing.


some times the cables also come off or the plastic components attached to the cables break


the motor turns a plastic wheel that winds the cables back and forward and this wheel jams or the cables come off the guides.


anyway the short answer is to change the whole regulator with a secondhand or a new one depending on your budget

i hope this helps


cheers

Jan 15, 2013 | Cars & Trucks

1 Answer

Fuse box location mitsubishi 380 2005


hi

the first internal fuse box on a Australian 380 Mitsubishi is located on the drivers right side end of the dash.


open the drivers side door and on the right end of the dash, you will see a panel that sits flush on the end of the dash.


pry the panel open with your fingers or a tool, it opens up to the right, there are relays and fuses in there for the cars different functions.


the 2nd fuse box is located under the hood/bonnet on the Australian 380 model.


if you are in front of the car looking at the windscreen it is located on the right side in a black box near the suspension tower.


the top pops off and relays and fuses are in there.


both fuses boxes have the wiring diagrams under the lids so you can identify which fuse operates which function


to match the fuses to the diagram, start from one end first and check the amps for that fuse then the next one in the same row and then the next one.


after that you should be able match the fuses to the diagram, if the fuses dont match the diagram from that end, then start at the other end and do the same thing.


i hope this helps


cheers

Jul 23, 2012 | Mitsubishi Cars & Trucks

1 Answer

I have a 2006 Mitsubishi 380 SX series 2. The temperature gauge has recently increased above the normal operating temp. The fans stay on when this temp is reached. The top radiator hose is hot, the bottom...


Stuck thermostat
Remove thermostat, put everything back on and let it run .See if normal operating temp is reached.
Also check oil for discoloration.

vote if this helps.

Jul 29, 2011 | Mitsubishi Sapporo Cars & Trucks

2 Answers

I need to verify the year of a series3 landrover approx 1976


You'll need to give more information..

Ill tell you how to distinguish between different series if thats what you want. Series 1 1948-1962~ Completely straight sides..
Series 2 + 2a ~1962-1973~ Curves inwards just before bottom of windows on the sides, still has metal radiator grill untill very late models and also its door hinges are not square
Series 3 ~1973-1983 Plastic radiator grill, headlights moved from the radiator grill to the mudguards, square door hinges, plastic dash.
All information might have inconsistencies due to previous owners of the vehicle changing parts.
Depending where you live there should be a compliance plate somewhere in the engine bay. In Aus its next to bonnet latch which should say build year and month etc

Aug 29, 2010 | 1993 Land Rover Defender

1 Answer

Drivers side window and power lock does not work in 2001 mits montero sp


check the wires in the door jam that connect the door to the chassis.. where they bend evertime open and close the door sometimes cause the wires to break

Apr 24, 2010 | 2001 Mitsubishi Montero Sport 4WD

1 Answer

04 jeep larado/windows will not open or close


If all fuses etc check out, look at wiring harness inside loom that is located near door hinge area of drivers door for bared or broken wires. Not uncommon for wires to get ruined especially at drivers door, as it is opened & closed the most.

Feb 26, 2009 | 2004 Jeep Grand Cherokee

1 Answer

380 ES Mitsubishi 2006 model door window control


It possably isnt the switch it maybe the motor itself if you open the door panel and disconect the moter run 2 wires to the main battery becarefull because when you do this the motor may or may not work if the window goes up or down when you do this then your moter is good if not replace motor otherwise switch your wires from one switch to anouther that you know is good and try to see if it works then your switch may be bad.. do to the drivers window being used the most the switch or motor will go bad sooner then the others

Jan 25, 2009 | 1992 Mitsubishi Diamante

3 Answers

Driver side power window stops working in 2003 mits. eclipse


the switches need cleaning ,they have contacts in them that get dirty you can spray contact cleaner on them or use emery paper to file them, they are not to hard to pull apart

Jan 16, 2009 | 2001 Mitsubishi Eclipse

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...