Question about 1998 Chevrolet Malibu

1 Answer

How do I remove the tint of my rear window in my 1998 chevy Malibu?

Posted by Anonymous on

  • Mitch Johnson Sep 05, 2010

    Does it have a rear window defroster?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

If it has a rear window defroster, you can't use a razor blade. If the tint material will pull off and leave glue behind, then spray windex on the glass and put the tint material back on the glass like it was. Can't do this in the sun to long, the sun will dry out the windex. The ammonia in the windex will loosen up the glue. Then you can remove the tint material, and the glue should wipe of with a paper towel.
p.s. let the windex soak for 5 min. or so.

Posted on Sep 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace third mount break light 2010 Chevy Malibu lt


Remove the rear window package shelf. Disengage the rear window shelf insulator from the rear shelf trim panel in order to get to the high mount stop lamp screws. Disconnect plug.

Oct 14, 2016 | 2010 Chevrolet Malibu

2 Answers

How do you remove the center console on 1998 chevy malibu


There is two screws under the tray in the console. also, check around the shifter knob for a small square with a removable cover or plug. this is a shifter release button that can be engaged with a pen or toothpick

Nov 29, 2012 | 1998 Chevrolet Malibu

1 Answer

The rear window defogger on my '98 Chevy Malibu has suddenly gotten VERY weak. It is no longer able to clear even the lightest inside fogging.


hi remove the contacts that connect the power and see if they are corroded as this will reduce the current to the strips, give them a clean with a bit of emery cloth wet and dry paper is best 1600 type, also purchase some white spirit or turpentine or an alcohol cleaner of sorts and with a soft cloth wipe the rear window this will remove the dirt on the strips and help them heat better...hope this helps please comment and rate thanks

Feb 03, 2011 | 1998 Chevrolet Malibu

1 Answer

Where is the front o2 sensors located on a 1998 chevy malibu?


closest to the engine.rear exhaust manifold on v6.in the exhaust manifold 4 cyl.

Dec 02, 2010 | 1998 Chevrolet Malibu

2 Answers

Where is the water pump located on a 1998 chevy malibu 4 cyl?


It is located at the rear of the engine between the timing cover and exhaust manifold. You will have to remove the manifold to ge to pump. It runs off the timing chain. It would be a wise decision to take to an experienced mechanic.

Jul 02, 2009 | 1998 Chevrolet Malibu

1 Answer

How do you replace a rear strut? This is a 1998 chevy malibu. The upper bearing.bushing is rattling.


rent a strut compression tool clamp the clamps on the spring tighten down and loosen the top three bolts some have two, then compress spring far enough to allow you to remove the strut bearing. and replace with new one and clean before installing new bearing. lightly lube wd 40.

Jun 25, 2009 | 1998 Chevrolet Malibu

1 Answer

1998 Malibu Instrument light not working


check the STOP- HAZ fuse with a 12 volt test ( both ends )

Apr 19, 2009 | 1998 Chevrolet Malibu

2 Answers

Drivers door panel removal


The book says 1. remove power accesory switch panel by using suitable flat blade tool at front. 2. Disconnet electrical connections.
3. pry door handle plug by using small flat bladed tool
4.remove door trim handle mounting screws
5. remove door trim panel from retainers.Start at rear bottom corner and pry outward.
6. remove door panel.
KD does make a tool that will properly pry the door panel away from reainers. KD 3705 You might get by with a screwdriver.
One other thing you may need to have the window down to get the panel to come off. You will have to lift up on it once it is loose from the fastners.
Hope this helps you out.

Mar 23, 2009 | 2003 Chevrolet Malibu

1 Answer

1998 chevy malibu window


remove door panel on the regulator 2 nut at the bottom removed them loosen the track window will come off pierre

Oct 06, 2008 | 1998 Chevrolet Malibu

Not finding what you are looking for?
1998 Chevrolet Malibu Logo

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...