Question about Cars & Trucks

1 Answer

How to remove the left rear door panel to replace the window motor

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 630 Answers

Generically these door panels are held on by a combination of plastic clips that need to be carefully pried off with the door panel, the power window motor switch must be unclipped carefully, and any philips head trim screws need to be removed as well, also be sure the qwindow is open all the way down this will also help make the removal of the door panel a bit smoother.
Happy Motoring!!

Posted on Jul 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where do I add washer fluid for rear window wiper on a 2000 blazer


Open the hatch and look for the fill cap along the sides .

Oct 23, 2015 | Cars & Trucks

2 Answers

Howto repair left back window


Get a tool for removing the inner door panel. Determine which tool is used to remove door handle / armrest (screwdriver or Torx or hex head screw) and get that tool. Remove door handle, then door panel. Once that is removed, you can determine whether nylon tape needs to be replaced or if motor assembly has come loose and needs to be reattached or if the window is simply off its track (if it is, you should already know this because it will drop down by itself). A video is at How To Install Replace Rear Power Window Regulator ...

If you want to have someone else repair the window, and if it has come off its track, use some clear packing tape (lengthwise) to secure the window to the door until you can get it repaired.

Aug 19, 2014 | 2003 Buick LeSabre

1 Answer

HOW TO REPLACE RIGHT REAR DOOR WINDOW ON 98TAURUS


Once you get the door panel off you can easily see how to remove the window which is riveted to the window regulator..Here are instructions for determining the rear door in a Taurus.
    • Pluck the window switch and lock switch from the rear door panel with the trim tool. Pull the wiring plugs out of each switch manually before setting the switches aside.
    • 2Remove the rear door panel retaining screws with either the Phillips screwdriver or socket set, depending on the year, make and model of your vehicle. If the panel will not lift off the rear door at this time, you may need to pry the door panel trim pins out of the door with the trim tool before removing the panel by hand. (This too will depend on the year, make and model of your vehicle.)
    • 3Raise the rear door window glass by hand and secure it with packing tape in the fully upright position to prevent unintended glass movement. Manually pull the wiring plug out of the rear window motor.
    • 4Remove the rear window motor retaining bolts with the socket set. Pull the old rear window motor out of the door through the door access hole. Position the new rear window motor in the door and bolt it in place with the socket set.
    • 5Reinstall the rear door panel on the rear door by reversing the door panel removal steps. Make sure to remove the tape from the window when done before you attempt to open the window.

Oct 04, 2012 | 1998 Ford Taurus

1 Answer

Rear door on left drivers window drop in track cable is the cable just of or should i replace motor 2003 dodge durango


you will have to remove door panel and check. most likely the cable broke and you will need to replace motor mechanism

Apr 18, 2011 | 2003 Dodge Durango

1 Answer

My rear power window is stuck open.. The button on the headliner still opens and closes the right side window but the left on will not shut. Also the rear wiper motor quit working..


if you have already checked your fuses and since the button on the door will not open or close the window and the driver's switch will not open or close the window either then chances are that the window regulator motor is bad. take the door panel off and unhook the wire to the motor using a voltage meter push the button and see if you get 12 volts if you do replace the window regulator motor. you may have to switch out the whole window regulator. do the same with the rear wiper motor take the back panel off and remove the wire from the motor connect your voltage meter to the motor and turn on the rear wiper it may be intermitting so wait a minit and see if you have voltage if so replace the motor. if not replace the switch.

Dec 08, 2010 | 2005 Saturn Relay

2 Answers

Replace door window motor


Is it a 4 dr or 2. What door front? rear? left or right?

Sep 28, 2010 | 1997 Nissan Pathfinder

2 Answers

I need help with replacing the driver side window in a 2003 ford f-150,four door super crew cab truck.


Removal & Installation
Motor - Front Door
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove the window control switch
  3. Remove the front door trim panel and watershield.
  4. Tape the window in the full UP position.
  5. Disconnect the window motor electrical connector.
    NOTE Support the window motor while removing the window motor retaining screws.
  6. Remove the window motor bolts and remove the motor.
  7. To install, reverse the removal procedure.
Rear Door
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove the window control switch.
  3. Remove the rear door trim panel and the rear door trim watershield.
  4. Remove the door speakers.
  5. Tape the window glass in the full UP position.
  6. Disconnect the window regulator electric drive.
  7. Position the connector for the window regulator electric drive inside of the door.
  8. Remove the bolts.
  9. Separate the window regulator electric drive from the rear door window regulator.
  10. Remove the window regulator electric drive from the door.
  11. To install, reverse the removal procedure.

Motor & Regulator

3d4a07e.jpg

Fig. Front Door Trim Panel

7932e42.jpg


Fig. Rear Door Trim Panel-Crew Cab


Regulator - Power Windows

506866e.jpg

Fig. Window regulator arm nuts


db15984.jpg

Fig. Window regulator bolts

  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove the window control switch.
  3. Remove the door trim panel.
  4. Remove the door speaker.
  5. Remove the door watershield.
    NOTE Do not remove the window glass from the door.
  6. Remove the window glass from the window regulator.
  7. Tape the window glass in the full UP position.
  8. Disconnect the window motor electrical connector (power windows only).
  9. Loosen the window regulator arm nuts and pull the arm from the mounting position.
  10. Loosen the bolts and remove the window regulator.
  11. To install, reverse the removal procedure.

Hope helped with this. Good luck.

Nov 16, 2009 | 2003 Ford F150 Regular Cab

1 Answer

1995 toyota celica


With the year of the car, the electric motors for the windows are weakening. the rubber seals on the windows have so much hold on the window, that a weak motor will not have enough power and thus will need to be replaced. You can remove the door panels, by removing all the screws, take flathead screwdriver and lighly pry around panel, pull up and remove panel. Then remove inside plastic and you will have access to the window motors.

Apr 30, 2009 | Toyota Celica Cars & Trucks

1 Answer

Window regulator replacement


Window Regulator, Rear Door, Explorer Removal
  1. Remove the rear door trim panel and watershield. Refer to Section 01-05B .
Trim Panel, Rear Door, Explorer, Hi-Series Four-Door Removal and Installation
  1. Remove the two screws retaining the rear door trim panel (27406) located above the door handle.
  1. Remove trim cup at the door handle using a screwdriver or sharp object. Retention nibs will flex for easy removal.
  1. To remove window regulator switch plate (14524) , use notch located at lower end of plate using a screwdriver to lift and remove.
  1. Remove window regulator switch plate from rear door trim panel pulling wire harness from rear door trim panel .
  1. From bottom of window regulator switch plate , remove two screws and disconnect connector from window regulator control switch (14529) .
  1. At each plastic clip location, pry the rear door trim panel away from the door inner panel using the door trim panel removing tool from Rotunda Moulding/Trim Kit 107-00401 or equivalent.
  1. Remove panel, lift slightly to remove flange at the top of rear door trim panel from trough in the glass weatherstrip. For installation, follow removal procedures in reverse order. Replace any bent, damaged or missing plastic clips on the rear door trim panel to the door inner panel, firmly loading clips into slots provided on rear door trim panel .
    33c9359.gif
  1. If equipped with power windows, disconnect the wire from the regulator.
  1. Remove the rear door window glass as described in this section.
  1. Remove the window guide, if equipped, (nuts and washers). Remove guide from door belt opening.
  1. Remove three 1/4-inch rivets attaching motor bracket (electric) to inner panel and two 1/4-inch rivets attaching regulator lower bracket to inner panel. Use drift punch to knock out center pins for each rivet. NOTE: Use care not to enlarge sheet metal holes in the door inner panel when drilling.
  1. Using a 1/4-inch diameter drill, drill out the remainder of the rivet.
  1. Remove two upper regulator attaching nuts.
  1. Remove regulator from the front door (20125) .
Installation
  1. Lubricate regulator mechanism with Multi-Purpose Grease D0AZ-19584-AA or equivalent.
  1. Install regulator into access hole in inner panel.
  1. Position regulator using upper regulator studs and tabs on motor mounting bracket (electric) or cup mounting plate (manual).
  1. Install rivets attaching regulator to door inner panel (1/4-20 x 1/2-inch bolt and 1/4-20 nut and washer assemblies or equivalent metric fasteners may be used as alternates).
  1. Install two upper regulator attachment nuts.
  1. Install door glass as outlined under Door Glass Installation.
  1. Adjust glass as outlined under Adjustments .
  1. Reconnect wire to regulator, if equipped.
  1. Check operation of window regulator.
  1. Install door watershield and trim panel. Refer to Section 01-05B .

Apr 11, 2009 | 1994 Ford Explorer Limited

1 Answer

Need to install left rear window motor


I had this problem with my front drivers window. it is a pain in the arse to replace even with 4 diagrams in front of you like i did. go to gm mechanic

Mar 23, 2009 | 2004 Buick Rendezvous

Not finding what you are looking for?

Open Questions:

Cars & Trucks Logo

Related Topics:

882 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...