Question about Cars & Trucks

1 Answer

I have a 80 series landcruiser done the spotlights but thay keep blowing my head light fuse the wires are 2 times bigger than the ipf kit

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 551 Answers

The fuse has a lower AMP that is why it is blown every time you switch on the spotlights. In order for the fuse not to be blown, my suggestion is try the direct connection on the spotlights. Connect the spotlight directly to the battery. Just put a switch on it. If you want to use the spotlights, just press the switch.

Posted on Jul 15, 2010

  • lamajciredor Jul 15, 2010

    Try the direct connection. In order for the fuse not to be blown, my suggestion is connect the spotlights to the battery. Just put a switch. If you want to use the spotlights, just press the switch and your good to go.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What could be causing the front axillary fuse to keep blowing? Even bigger fuses blow.


fuses blow from over current( dead short) they are rated at lower than what is required so that the wire doesn't burn
If you keep putting in bigger fuses without fixing the dead short, eventually the wire will melt the plastic insulation off and the vehicle will burn

Apr 29, 2016 | 2005 Buick Rendezvous

2 Answers

Problems with batteries & alternator 80 Series T/Diesel GXL Auto LandCruiser Would like a Engine wiring diagram if possible. Have had problems since Panel beaters replaced a door on drivers side


sound like you have a bad ground our pwr or short in you wireing sounds like some ine pinched a wire in the door and caused a direct short to ground or your alternator regulator went bad the wrong way supplying youcar with over 14.4 v max 12v reg when you dbl voltage you cut amperage in half and that will fry all electronics and no fuse will blow there for frying B.C.M ,E.C.M P.C.M MULTIFUNCTION SWITCH WIPERS TURN SIGNALS HEAD LIGHTS TAIOL LIGHTS ECT

Dec 04, 2014 | Cars & Trucks

1 Answer

Toyota 80 series GLX auto landcruiser 1996 need head bolt torque a nd cam shaft torque settings


Torque setting Toyota Land-cruiser 80 Series 4.5 1995-98
Engine code: 1FZ-FE, 1HD.
Stage 1: 20 Nm (Start tightening bolts from center to outwards)
Stage 2: 39 Nm
Stage 3: Rotate each bolt by 90 Degrees.
Stage 4: Further rotate each bolt by 90 Degrees

Nov 22, 2014 | 1996 Toyota Land Cruiser

1 Answer

Why does the fuel system light keep coming on my Landcruiser workmate 70 series 2004


Make a good cleaning in the tanks
Check intank filters
Check the fuel pressure sensor on pump

Jul 11, 2017 | 2004 Toyota Land Cruiser

1 Answer

Why does the system fuel light keep coming on my Toyota landcruiser workmate 70 series 2004 year car


sometimes oxygen sensor can trip different lights coming on, you could try changing that to see if it stops it, if not could be some type of fuse tripping the electrical system.

Jun 28, 2014 | 2004 Toyota Land Cruiser

1 Answer

Why does the system fuel light keep showing on my landcruiser workmate 70 series 2004 yr


did they replace the fuel pressure sensor. as this could be the problem. it could be over pressure or underpressure, that could be the regulator is blocked or the injector filter is clogged. but if no change in any driving needs then would just think it was the sensor as the others would limit fuel.

Jul 27, 2017 | Toyota Land Cruiser Cars & Trucks

1 Answer

Why does my fuel system light keep coming on my 2009 Workmate Toyota landcruiser 70 series


Could be a problem with yr fuel sender unit as it has done a fair few k's I would just ignore it anyway!!! Sometime the actual float 4 some reason will sink & activate the low fuel level warning light!!! Mine does it all the time wen I park at an angle - up or down a hill......

Jun 28, 2014 | 2000 Toyota Land Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...