Question about 2002 Chevrolet Astro

1 Answer

Which is the exhuast valve; and intake valve on each cyclinder of a 2002 astro

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 977 Answers

If it is an inline engine (not a V6 or V8 ) the first valve is an exhaust ,the next two are inlets ,the next two are exhausts, & so on ,the last one is an exhaust.....hope this helps.....cheers

Posted on Jul 15, 2010

Testimonial: "what if it is 6 cyclinder; and wen do you tighten up the inlets"

  • eric madden Aug 14, 2010

    it makes no difference you only need to adjust the valve clearance when they become real noisy there is no set time.....cheers

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the EGR Valve a 2005 Dodge Durango 5.7 Hemi located?


It is mounted to the intake manifold and has a small metal tube coming off of the side of it going to the exhuast.

Feb 04, 2012 | Dodge Durango Cars & Trucks

1 Answer

2000 pontiac montana reads a code 405, engine dies when i am slowing down coming to a stop and when sitting still if it dosent die it overheats,shifts really hard whats wrong


Sounds like EGR Valve (Exhuast Gas Recirculation Valve) is sticking in the open position allowing exhuast gas into the intake manifold to soon which at idle will cause the engine to either run real rough or to stall out.Some EGR valves can be taken off and clean the carbon out of it or you can replace it.

Apr 01, 2011 | Pontiac Montana Cars & Trucks

2 Answers

How do you replace the fuel injectors in a 94 chevy astro


I believe a 94 astro has a cpi system this is a central injector with 6 tubes with poppet valves this located inside of the intake manifold,the top half of the plenum comes off and then the central injectoris inside,make sure your fuel pressure is up to spec also

Oct 01, 2010 | 1994 Chevrolet Astro

1 Answer

Obd 2 codes P0302-P0304-P0305-P1313-P1316 and P0778 2002 Jaguar X type 3.0


THE P0302 is misfire cyclinder 2,4,and 5
The P1313 P1316 is Cyclinder compressor low, Worn camshaft/ broken valve springs. Fuel injector contamination, Spark plug failure/ incorrect gap. Iginition coil failure.
P0778 is 2/4 Brake prssure solenoid failure

HOPE THIS CAN HELP.

Apr 09, 2010 | 2002 Jaguar X-Type

1 Answer

1990 Chevrolet Astro, 4.3L TBI, runs smooth until it heats up, then acts as if it has a miss, and runs rough. It appears one of the throttle body injectors is not spraying fuel when it's running rough. I...


Chk. your egr. valve and see if its functioning, sometimes it gets a carbon buildup in the intake where it bolts on and also in the valve itself. Take it off and clean the valve with carb. cleaner and also clean out the intake with a screwdriver and shopvac, and make sure the valve works before you reinstall it, and also get a screaned gasget at your local auto parts store before you reinstall it in case you miss some particals in the intake it will insure that no particals will get into the egr valve.

Sep 07, 2009 | 1990 Chevrolet Astro Extended

2 Answers

I have taken the head off the engine and need to known how to find TDC on the compression stroke, with the head off? Hyundai Accent 2000 Model 1500cc.


Hey..my name is Keith..i'll try to answer your question..and the way to find TDC is to take your valve cover off..and find the valves and rocker arms to your #1 cyclinder..then ya rotate the crank til the markings on the harmonic balancer says its at TDC...then you grab the rocker arms on the valves..and if the intake valve and exhaust valve has no pressure on it..then you know you are on #1 cyclinder at TDC..if not..keep rotating the crankshaft until the #1 cyclinder valves has no pressure on them..i hope this has helped

Jun 29, 2009 | 2000 Hyundai Accent

2 Answers

Grey smoke high oil usage


It sound like you have a set of worn intake valve guides and seals. When your engine is idling , the intake manifold vacuum is high. If the guides or seal are bad, the manifold vacuum draw oil pass the valve stem. then in intake ports.

Apr 03, 2009 | 1999 Chevrolet Silverado 2500

1 Answer

Celica 1.8 st


Hi, check your valve lash your lifters are not hydrolic, on 7AFE motor valve lash should be done cold and set at 0.15-0.25mm for intake and 0.25-0.35 for exhuast.  On the 5SFE motor set cold also is 0.19-0.29mm intake and 0.28-0.38 for exhaust.

Dec 01, 2008 | 1997 Toyota Celica

Not finding what you are looking for?
2002 Chevrolet Astro Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...