Question about 1994 Honda Accord

Open Question

How to rewire my window switch on a honda accord motor good switch good

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

solasknows
  • 199 Answers

SOURCE: 1995 honda accord window starts up gets stuck moves side to side

you need to replace engine and or track where the window sits on here is how to do that
1) put some music ( dont get bored) 2) remove door panel 3) check door track if needs lubrication 4) replace electric motor if necessary 5) have fun

Posted on Aug 24, 2009

  • 11 Answers

SOURCE: The blower motor checks good but doesn't come on

SWITCH

Posted on Sep 20, 2009

  • 105 Answers

SOURCE: 2007 honda accord four door with power windows

if you try to move the windows with the other switches on the other doors and the windows still do not work then replace the drivers door master switch. the circuit for all windows runs through that switch

Posted on Oct 27, 2009

  • 98 Answers

SOURCE: Power Window Stuck Down On 97 Honda Accord

try going to a junk yard your motor was fine but your controls are not buy the controls and change them hondas do this when the resistance is burned out Junk Yard is the best place to find something simple as this 2 screws 3 plugs basic plug in play deal

Posted on Apr 04, 2010

caroldon
  • 17129 Answers

SOURCE: 1997 honda accord with power windows....driver

Before you change make sure there is power on the board , if so the circuit must be checked for delivering voltage as the switch is pressed. the switch can be checked with a multimeter for continuity. Only if there is power to the motor without response must the motor be changed. if not the fault can be the control circuit board, maybe failure of the motor driver.

Posted on Feb 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Honda Accord the rear passanger window will


-Do you heard the motor working but just not go up...?
If So the plastic element that push the window up and down is broken.
-If Not noise or nothing at all Then possibly dirty switch or bad connector on the motor it self.


Good Luck
Mai

Oct 13, 2014 | 2003 Honda Accord

1 Answer

2002 Honda accord passenger power window won't go


run power t the motor to see if motor is bad if not pull apart switches and clean contacts or replace

May 05, 2012 | 2002 Honda Accord

1 Answer

Driver's side power window won't work in '96 honda accord. stuck in the down position.


Its most likely a faulty power window motor. They all have individual circuit breakers inside the motor or switch, they aren't on a fuse. They quite often fail in either full up or full down positions, but can stop anywhere. Remove the door panel and locate the 2 wire connector coming from the motor. If you have a test light jumper across both wires (on the vehicle side of connector), while using the switch. It should light up in both directions (bi-directional motor). If the test light only lights in one direction or neither, it is most likely a bad window switch. To verify, jumper 12Volts to one side of the window motor connection and ground the other. The window should move in one direction, revrse the 2 wires the window moves in opposite direction then the motor is good.

Jan 27, 2011 | 1996 Honda Accord

1 Answer

Honda accord power window control from Driver panel stopped working, each door still ha scontrol of power windows also setting lock function from remote works but horn wil not honk after second...


drivers switch panel serves as the brain for all windows in vehicle, and if the other windows work from thier switch then the main switch is most likly good, look inside the door for the motor, and apply power and ground to it, if it works, then its the wires to the motor, and if not then replace the motor.(cold affects these motors really bad, as the grease gets thicker with cold and puts stress on the motor, and can burn it out.if everything there is ok, then the electronic part of that switch is lost and will require a new one.

Dec 30, 2010 | 2001 Honda Accord

1 Answer

New power window regulator installed, now window goes up to top then comes back down half way and stops. How to adjust?


It is important to learn how to fix a Honda Accord window if you have an older Honda Accord. Although the Honda Accord is renowned for being a durable vehicle, the electric window motor regulators in older models can wear out over time. This is noticeable when you hear sounds coming from the window when you attempt to use it but the window won't move. But don't worry, you can use these steps to fix a broken window in your Honda Accord.

To fix a Honda Accord window, you will need:
  • A Phillips screwdriver
  • A flathead screwdriver
  • A wrench set
  • A black marker
  • Masking tape
  • A new Honda Accord electric window regulator
  1. Remove the screws securing the door panel from the inside of the vehicle. These screws are beneath the arm rest. Release the door panel by prying it away from the front of the door. Work your way back by prying off the top and sides of the panel and the back of the panel.
  2. Remove the clips holding the door panel using a flathead screwdriver to pinch them together. Remove the panel by sliding it upward and away from the door.
  3. Remove the two bolts securing the window to the regulator. Note the position where the bolts secure the windows. When you re-install the window you will need to adjust them similarly. Making a small mark on the window with a black marker is a good way to easily keep track of the correct position.
  4. Lift the window directly up and remove it from the car door. Secure it using masking tape if you prefer not to remove it completely.
  5. Remove the bolts securing the window motor and guide. Remove the window motor and guide and set them aside.
  6. Remove the regulator from the power window motor assembly. Dispose of the old regulator and install the new unit.
  7. Re-attach the window motor and guide to the door by following the removal instructions in reverse. Test the new window regulator by turning on your ignition switch and moving the window up with the electric switch.
take it back apart somethings not tight

Dec 07, 2010 | 2004 Honda Accord

1 Answer

2007 honda accord four door with power windows & the drivers window is the only one that works, my switchs, fuses & motors are good how do i fix it?


if you try to move the windows with the other switches on the other doors and the windows still do not work then replace the drivers door master switch. the circuit for all windows runs through that switch

Oct 19, 2009 | 2007 Honda Odyssey

2 Answers

Window does not go up or down


if electric-the motor is broken or jammed or wiring problems. i personally knoked on the outside of my door and voila! it worked again. i hope this is helpful in some sort of way. good luck!

Jun 09, 2009 | 1997 Honda Accord

1 Answer

Window wont roll down


http://cgi.ebay.com/ebaymotors/94-95-96-97-Honda-Accord-2DR-Window-Regulator-Motor-RH_W0QQitemZ110385565901QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item19b37e10cd&_trksid=p4506.c0.m245&_trkparms=65:3|39:1|240:1318#ht_1832wt_1185
And you need the manual to look at how to do some tedious work. I couldn't remember all those parts so I recommend tape and labels and notes as you go if memory is bad. I tape the screws to the area where I removed them. Switches break too and so far I can't tell if it's a switch problem or motor. A small piece of copper wire should help you bridge the contact points, where the switch normally does so you can see if the switch is bad.  My doors went bad close together and that indicates the switch. Some people say a can of switch cleaning spray is good enough.

May 25, 2009 | 1995 Honda Accord

1 Answer

1992 Honda Accord Driverside window moving extemely slow.


It's going to either be your window lift motor, or the switch/switch contacts.

I would recommend taking the switch housing apart and cleaning the contacts, and if that doesn't work, replacing the switch.

I always leave the most expensive part (lift motor) for last.

Nov 29, 2008 | 2000 Honda Accord

Not finding what you are looking for?
1994 Honda Accord Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...