Question about 1983 Toyota Cressida

1 Answer

I recently purchased this car 1983 Toyota Cressida. Once getting onto the freeway could barely get up to 45 then 55 then hit 65 and it drop as if no gas pressure. Petal was to the floor. Top the gas gauge on dash was registering that i just put in 6.668 gallons. It seems to be sputtering alot. Finally when trying to get home ended up on surface streets cause couldn't get up to 30-45 would end up going real slooooooooooooow. Trying to see if there is an thought of what to check or what it may be. Sincerely, Soul P.S. Thanking you in advance for the posts that have been or that will be answered.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I don't have a solution to your problem, but my 1983 Toyota Cressida is doing the EXACT Same thing. I wish i know..

Posted on Nov 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota cressida mx 83 cylinder head bolt tightening torque


petrtol engine alloy head then around 65 if this oldie is cast iron head then 75 is ok but a higher setting can be used to make sure its down and you dont have to do it again after a set time of say 85/90

Apr 13, 2013 | 1992 Toyota Cressida

1 Answer

I recently bought a 2008 Toyota Yaris I love the mileage but on the Freeway at 65-80 mph I get a lot of steering wander. I see there have been issues like the in the Yaris but how do you correct it?


why are you doing 65-80 in probably a 55 zone? slow down. if it is a small car which it probably is, it is not designed for highway speeds especially those

Mar 25, 2012 | 2008 Toyota Yaris Sedan

1 Answer

1983 toyota cressida will not start.,have feul and spark


If you are sure of spark and fuel, you should do a compression test. Possible timing problem. (Timing belt or chain)

Oct 01, 2010 | 1983 Toyota Cressida

1 Answer

I have a 81 toyota cressida that bogs down when i step hard on the accelerator, car was just purchased after sitting for about 8 months


If it uses a carb, the primary jet may smaller so replace this with another jet size 90. I was able to solve the same problem with my car.

Sep 07, 2010 | 1983 Toyota Cressida

1 Answer

1983 toyota cressida spark plug wire diagram


Hope this helps, also a good site, you found it lol.

e04cb36.gif

Jul 14, 2010 | 1983 Toyota Cressida

1 Answer

Cressida will not start


ck fuses ck for broken electrical lines etc

Aug 23, 2009 | 1983 Toyota Cressida

1 Answer

Engine turns but no cumbustion or engine run 1983 cressida Gli6


Do a compression test , The cylinders should all be even.
Let me know the results.
Cheers
George

Jul 03, 2009 | 1987 Toyota Cressida

1 Answer

No fuel to start it.


Take a gas line off and try to whirl the car over.  If you are getting gas shooting out, then your fuel pump is working.  However, just because you are getting gas out, doesn't mean that it is sufficient pressure.

Mar 09, 2009 | 1983 Toyota Cressida

1 Answer

1983 toyota cressida no fuel delivery


Very often the air flow meter is at fault

Jan 18, 2009 | 1984 Toyota Cressida

1 Answer

Fuel filter location for 1983 Cressida


Hello George. Just saw this post and thought I'd answer even though you probably already solved it. I had an 83 with manual tranny--loved that car. I replace the filter twice. It is right under the driver's side floorboard tucked up tight next to the outer frame rail as it inclines up toward the firewall. Hard to work on. David

Jul 29, 2008 | 1986 Toyota Cressida

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...