Question about 1994 Mazda Protege
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
It is on the same place where your speedometer cable goes in. Pretty tricky thing, but you don't fill it where the cable goes in, but that assembly has a 10mm nut, possibly 12mm that the entire cable and the screw thing for the cable pops out. unscrewing the cable will not work, you need to find the nut down on the side to make the hole big enoug to fill. basically its on top of the tranny
Posted on Oct 28, 2008
try calling a junkyard and see if they will tell you the enterchange ok good luck
Posted on Apr 18, 2009
Heres a picture to show you where to find the fill on your trany, if you look under the car on the driverside, remove the front under cover to see, on the side of trany which will be facing you is the plug fill, and oil should be level with the bottom of the fill hole a little oil should run out, that means its full.hope this helps ,good luck.
Posted on Oct 04, 2010
For a manual transmission, you have to remove the speedometer cable from the top of the transmission, including the single bolt that holds the speedometer cable housing. From there, you use a long tube and a funnel to pour the transmission fluid into the speedometer cable hole. Yes, quite inconvenient.
Posted on Mar 24, 2011
Tips for a great answer:
Feb 07, 2016 | 1994 Mazda Protege
Apr 10, 2012 | 2002 Mazda Protege
Jul 22, 2011 | 1994 Mazda Protege
Apr 18, 2009 | Mazda Protege Cars & Trucks
Apr 15, 2009 | 1994 Mazda Protege
Jan 05, 2009 | 1994 Mazda Protege
Aug 01, 2008 | 1997 Mazda Protege
132 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: