Question about 2002 Jeep Liberty

1 Answer

How do i remove the battery for a jeep liberty

How do i remove a battery for a jeep liberty

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,341 Answers

There must be 2 screws that connects the wiring to the battery, that is one +ve and -ve, then you also have a screw or a battery holder that already holds the battery in place that needs coming off.Hope this helps.If you are unsure of anything then email me and I will get back to you in due course.

Posted on Jul 14, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2004 jeep liberty front seat removal

left or right?
battery neg lug off.
all connectors under seat ,unplugged
then the 4 bolts out
KJ jeep SM serv, man.covers this.
chapter 23 page 78

cut > paste


Feb 20, 2017 | 2004 Jeep Liberty

1 Answer

Jeep liberty 2005 battery light won't go off even after I replace the battery because the other one was deader than a doornail.

Needs the code removed from the computer. Go have it tested at Autozone, or some place that it is free, some will remove the code.

Nov 10, 2014 | 2005 Jeep Liberty

1 Answer

2007 jeep liberty clock/radio won't shut off draining battery

Check if it has a relay. The contact in it could be shorted. Replace the relay.

Aug 12, 2014 | 2007 Jeep Liberty Limited

1 Answer

Battery voltage low on 2003 jeep liberty 3.7 just changed altenator and battery

you reverse the battery cables?
you remove the alternator before pulling the battery NEG. LUG?
if you do pulled the alt, with out lug pull that blows a huge fuse.
battery voltage low and no voltage stated, nor how taken. (crankiing or not or both)
3.7 L PowerTech V6 (gasoline)
my guess is this is a NO CRANK post .?
"solenoid, code pops?" what is that, a noise? or?
what was **** ,
transmission wont , what.????

Nov 29, 2013 | 2003 Jeep Liberty

1 Answer

I cant get my jeep liberty to r eset the alarm

The battery might be unable to maintain 12V. That will cause that issue. how old is that battery?

Oct 14, 2013 | 2006 Jeep Liberty

1 Answer

Put a larger battery in a 2002 jeep liberty

As long as it can fit in there, it should be fine.

Jan 27, 2013 | 2002 Jeep Liberty

1 Answer

How I remove the starter for Jeep Liberty 2002

you must remove front prop (if 4 wheel drive) 8mm bolts after removeing half the bolts put transfer in nutural turn the prop and remove rest of bolts,. prop will compress and can be moved out of the way. be sure battery is disconnected.starter is held on with 15mm bolts losen these and the 13mm and 8mm electrical connectorbolts starter can now be removed reverse procedure to install.

Aug 15, 2010 | 2002 Jeep Liberty

1 Answer

My 2009 Jeep Liberty constantly has a dead battery every morning. The battery stays charged throughout the day but drains at night. What is the problem?

Something's running, obviously. Get a volt-ohmmeter that can measure current draw, remove each fuse one-by-one, and test each circuit for a non-zero current.

Oct 22, 2009 | 2009 Jeep Liberty

1 Answer

2004 jeep liberty replacing the starter

2004 Jeep Liberty 4WD 3.7L MFI SOHC 6cyl
Starteer - Removal & Installation

2.4L & 3.7L Engines
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Disconnect the negative battery cable.
  3. Remove the starter mounting bolts.
  4. On the 3.7L engine, the left side exhaust pipe and front driveshaft must be disconnected.
  5. Disconnect the starter solenoid harness connections.
  6. Remove the starter.
To install:


Fig. Starter mounting: 2.4L engine


Fig. The starter position for the 3.7L engine
  1. Connect the starter solenoid wiring connectors.
  2. Install the starter and torque the bolts to 40 ft. lbs. (54 Nm).
  3. On the 3.7L, the left side exhaust pipe and front driveshaft.
  4. Install the negative battery cable and check for proper operation.

2.8L Engine
  1. Disconnect and isolate negative battery cable.
  2. Raise and support vehicle.
  3. Disconnect solenoid wire connector from solenoid terminal
  4. Remove battery cable from stud on starter solenoid.
  5. Remove 3 starter mounting bolts.
  6. Remove starter from transmission bellhousing.
To install:
  1. Position starter motor to transmission housing.
  2. Connect battery cable solenoid terminal wire harness connector to connector receptacle on starter solenoid. Always support starter motor during this process. Do not let starter motor hang from wire harness.
  3. Install battery cable eyelet terminal onto solenoid B(+) terminal stud.
  4. Install nut securing battery cable eyelet terminal to starter solenoid B(+) terminal stud.
  5. Refer to torque specifications.
  6. Position starter motor and install 3 bolts. Tighten 3 bolts in this sequence: top bolt, bottom bolt, middle bolt. Refer to torque specifications.
  7. Lower vehicle.
  8. Connect negative battery cable.

Also can review the Service Repair Manual for Jeep KJ Liberty

I really hope help you with this (remember rated this help) Good luck.

Oct 04, 2009 | 2004 Jeep Liberty

Not finding what you are looking for?
2002 Jeep Liberty Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides