Question about 1992 Audi 80
PULL DOWN THE FLAT PANEL IN THE SUNROOF MOTOR AND WIND IT CLOSED BY HAND USING THE KEY IN THE TOOLS....
Posted on Jul 14, 2010
Testimonial: "Seems an excellent solution - will try tomorrow in the workshop."
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
To check the condition of your original sunroof guides:
- Gl*** in closed position.
- Locate & remove 3 torx bolts on each side of sunroof glass. Lift glass out of sunroof opening & set aside in a safe place.
- Locate "J" shaped cover plate at front of sunroof track assembly. Remove 2 torx bolts from each cover plate.
- Lift up bracket to remove.
- Inspect the plastic guides on each side. The sunroof cables attach to guides on front outer corner. Inspect this area closely for damage.
- Do not operate the sunroof with the J plates removed.Troubleshooting:If the sunroof guides are not broken & the glass is a uniform height along the rear edge your problem may be a stripped gear inside the motor. The motor has a manual override:
- Get access to the motor by removing the map light/switch console or lowering the front of the headliner.
- Insert a large standard screwdriver into the nylon bushing at the center of the motor hub. Push up & turn the screwdriver to manually move the sunroof glass. If the unit will fully open & close manually, you most likely only need a replacement motor.
If your sunroof is stuck in the open position follow these steps to get it closed:
- Remove the glass.
- Try to close the unit without the glass. Many times one side will still be operational and close correctly.
- Try to slide the inoperable lift arm forward. If it moves, slide it forward until it stops.
- You now need to slide the original plastic guide forward to lower the arm to the closed position. Using a standard screwdriver, push it forward. The lift arm should begin to lower.
- If the lift arm will still not fully lower, remove the J plate as explained above, sometimes the sunroof cable will need to be lifted up to allow the guide to fully slide forward.
- Reinstall glass.
May 21, 2016 | Cars & Trucks
Aug 14, 2011 | 2006 Mazda 3
May 31, 2010 | 1997 BMW 328
Mar 07, 2010 | 2002 Volkswagen Golf
Oct 26, 2009 | 2004 Mitsubishi Galant
Aug 11, 2009 | 1994 Audi Cabriolet
Jul 07, 2009 | 1987 Porsche 944
Jun 20, 2009 | 2005 Chevrolet Equinox
Sep 13, 2008 | 1990 Volvo 740
Aug 22, 2008 | 1995 Audi Cabriolet
378 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: