Question about 1991 Ford F250

1 Answer

My 1991 ford f250 can not shift into gear it what would the problem be

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 141 Answers

Is you clutch working. block wheels set parking brake don't start.
Have someone push on the clutch pedal. Look for rod to move on side of bell housing. Okay not working.
Check you clutch master Cylinder for fluid.
Fill and pump pedal slow to remove air from system. If this don't work try opening bleeder on slave cylinder attach a hose to bleeder and place other end of hose in a jar 1/2 filled with fluid. Now pump slow pedal very slow. (Don't run out of fluid or over flow jar.) If fluid is black it is 1 sign you may need to rebuild or replace master cylinder or slave cylinder.
If rod was moving you could have a bad clutch. If with engine off can you put it in gear?
If have an ""automatic"" your switch on your brake pedal are may have gone bad.

Posted on Jul 14, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

91 f250 diesel hesitates in drive

check fluid levels and color.. if brown and dirty, change fluid and filter in the trans pan refill to full and it should shift better..sounds like the filter is clogged up..also check vacuum lines from the pump to the transmission..fix any leaks

Jan 21, 2013 | 1991 Ford F250

2 Answers

Hard shifting between all gears

do a tranny service. drop the tranny pan, drain the fluid. replace the fliter. refill fluid and add an additive like BGs tranny oil. this should help... if not, plan to purchase a new tranny

Feb 12, 2011 | 1991 Ford F250

1 Answer

My 1991 Ford F250, 5.8ltr Not auto shifting?


Apr 16, 2010 | 1991 Ford F250

1 Answer

Can I put a transmission from a 1992 F250 4x4 Diesel, into a 1991 F250 4x4 gas truck?

it may fit but the gearing is gonna be way off, i would not do it

Oct 13, 2009 | 1991 Ford F250

2 Answers

Hi, My 1991 F350 7.3 diesel will go in reverse but

automatic transmission: transmission filter needs to be changed
manual; kickout relay

Sep 10, 2009 | 1991 Ford F250

1 Answer

Can't shift gears, Clutch pedal goes clear to the floor

add fluid then bleed the system by slackening of bleed screw at slave cylinder.Push pedal down close the bleed screw with the pedal down.and do so until the air as stoped coming out.If its been done before she has a leak at one of the cylinders

Jun 10, 2009 | 1991 Ford F250

1 Answer

Transmission issues, codes included

Check to see if the wire is lose tran sender

Nov 19, 2008 | 1991 Ford F250

Not finding what you are looking for?
1991 Ford F250 Logo

346 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

gerry bissi

Level 3 Expert

4376 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides