Question about 1996 Jeep Grand Cherokee

1 Answer

Im getting no fuel no spark

She was running good after i shut her off she wouldnt read any of my gas gages shes got no fuel in the rail and im not getting any spark she will not respond to any computers either

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,826 Answers

Ecm time, I think.

Posted on Jul 14, 2010

Testimonial: "anythings worth looking intoe.. thanx "

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 ram 2500 5.9 gas motor. Drive down the road and it shuts off gauges are still on. No loss of electronics wont restart until the fuel gauge reads. New fuel pump tps and crankshaft position sensor.


When problem is ongoing, if it cranks good but won't start, have a helper crank it while you visually check for spark at the spark plugs. If spark everywhere, use a gage and check proper fuel pressure and fuel injector pulse.
How long since a tune-up? Any applicable trouble codes? At the moment, I'm not sure what the fuel gage has to do with it? You could check voltage and ground for the fuel pump and fuel gage sending unit. I haven't looked at any of your wiring, yet.

Apr 01, 2016 | Cars & Trucks

1 Answer

Where is the fuel injector relay on a 2004 vw gti 2.8 liter 24 valve 6 cylinder?


check the immobilizer as it may be preventing the ECM to allow fuel past the injectors
run the fault codes and it could be the ECM needs resetting using a scan tool

Mar 13, 2016 | Cars & Trucks

1 Answer

2004 cavalier wont start


If your plug boots come off with ignition coil housing, remove it, then use spark tester in plug boot. Crank the engine and watch for spark. You would probably want to pull fuel injector fuse, no need to spray gas.

Then use a gage and check proper fuel pressure. Some vehicles don't have a Schrader valve, so you need proper fittings to tee into supply line, in order to use pressure gage. Don't take any fuel lines loose unless your sure, no pressure on the system.
I can only help with testing.

Apr 20, 2017 | Cars & Trucks

4 Answers

1996 dodge grand caravan 3.3 has spark and gas but won't start??


I had one where the gauge cluster isnt working and van wouldnt start or would start and shut off after 5 seconds so make sure gauges are working

Dec 05, 2012 | 1996 Dodge Grand Caravan

1 Answer

Run out of gas on a 2006 silverodo z71 and it will not crank after I put gas in it


I take it you mean it WILL crank(turnover) but wont start. Anyway, Your problem may be a lack of fuel pressure. Could be the filter is now clogged. Trapped air in fuel lines, and fuel rails. Most GM vehicles have a schrader valve on one of the fuel rails. It looks similar to a tire valve stem. You could turn the key to on, make sure you hear the pump in the tank running. It will run a few seconds to pressurize the fuel system, and run continuously after the engine starts. Using a fuel pressure gage to check pressure and depress the valve carefully to visually see if fuel or air is present. Dont position yourself to be sprayed with gas.

Most late model vehicles wont arm the ignition(spark) systems unless there is correct fuel pressure, among other things. Something you may not know is that most all fuel tanks have a reserve of 1 to 3 gallons of fuel in the tank that wont register on the gage. Putting in 1 or 2 gallons most likely is not enough to prime the system. Hope this helps.

Aug 17, 2011 | 2006 Chevrolet Silverado 1500 2WD

3 Answers

Starts then stalls out after idle then doesnt start at all no gas in the valve by the fuel rail to check for gas pressure is this for sure a fuel pump or maybe just a really bad filter from running it...


the way a electric pump works is the pump uses the gas to keep its self cooled so when you run the car out of gas or low on gas it gets hot and has to work harder but hey what can u do when your broke. that valve on the fuel rail u can use to tell if you getting fuel have someone turn the ignition on and push the valve in if you get no gas then check the interia switch if that switch is tripped it will shut off power to the pump a blown fuse or bad relay can do the same. if all is good there take the bule line off and see if you can get gas to come out there but be careful to not get gas in your eyes if you get gas out there then the filter is plugged if no gas comes out then you got to replace the pump.

Dec 07, 2010 | 2000 Chevrolet Silverado

1 Answer

I have a 96 blazer that wont start i check for spark i have spark a full tank of gas u can hear the fuel pump come on i checked the fuel perge line shes getting gas but alls shes doing is turning over


Try squirting some starting fluid in the intake and see if it starts if it starts then dies its lacking fuel this could could be that the crank position sensor could be bad. Do you have any codes and have you had them extracted( check engine light is on).the fuel pump may be working and you may be getting fuel up to the fuel rail but if the injectors are not getting the signal to pulsate you will not get any fuel in the intake so check the crank position sensor.Try this first if this doesnt do it check the timing how many miles are on the vehicle if it has high milage it may be in the timing belt. If this has helped you please rate my assistance towards you thank you.

Mar 01, 2010 | 1996 Chevrolet Blazer

1 Answer

My zeds sick


Are you getting sufficient pressure @ the rail?

May 21, 2009 | 1990 Nissan 300ZX

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...