Question about 2004 Pontiac Montana
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You headlight lamp have a diffuser mechanism which allows it to flip between the hight beam and low beam feature of the bulb. In fact, you high beam will function even if the low beam is not working.
I would recommend the purchase of the new headlight lamp. It would cost you you any where from $15.00 per unit to get a replacement lamp
Posted on Jan 06, 2009
For the sliding doors you need to clean the contacts, there are 6 or 8 on both sides, just wipe them clean as they are probably covered in oil/grease/grime.
Posted on Feb 14, 2009
my 2000 montana just started to do this mine is the TCC (torque converter control) switch inside the tranny dealer said around $2000 to put it in and the part only cost $52 and lucky me im outta warranty isnt that funny how that works i think im just gonna sell it HOPE THIS HELPS YOU GUYS
Posted on Apr 10, 2009
There are a few ways to doing this, and it takes time and a few band aids. You can remove the alternator to give you some room to access the rear spark plug with an extension and swivel spark plug socket. You can also get to the plugs from under neath if you have a ramp and long arm, an extension and swivel spark plug socket will help. You may have to use a 2x4 to wedge the engine to give you some room if you have larger arms. The other way is to tilt the engine forward by disconnecting the two top engine mounts. First replace the 3 front plugs and wire one at a time so you don't cross them. After you have changed the front plugs have a friend help you. Make sure the parking brakes are on and disconnect the two top engine mounts, release the parking brakes and let the transmission in park. Push the van forward slowly to tilt the engine forward far enough to give you room with out pushing it to far in to the radiator. Put the parking brakes on again to keep the van from rolling back and place a block of wood behind and in front of the rear wheels. Don't want to lose an arm. Replace the rear plugs with extensions and a swivel spark plug socket. Note, your going to have to replace the spark plug wire since the rear ones are really hard to remove and pulling on then will destroy them, not worth the headache trying to save them. Use platinum plugs so you can get 100.000 miles before you have to change them again so use anti-seize on the plugs so you can remove them again. Good luck and hope this helps, I personally go from under the van.
Posted on Jul 06, 2009
Tips for a great answer:
May 21, 2017 | 2004 Chevrolet Venture Passanger
Nov 21, 2016 | 2004 Pontiac Montana
Feb 01, 2015 | 2004 Pontiac Montana
Mar 14, 2013 | 2004 Pontiac Montana
Feb 20, 2013 | 2006 Pontiac Montana
Apr 23, 2010 | 2004 Pontiac Montana
Mar 30, 2010 | 2003 Pontiac Montana
Oct 20, 2009 | 2000 Pontiac Montana
210 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: