Question about Hummer H3T

1 Answer

Rover 620si 1995 n reg, spark plug blew out refitted now wont fire

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 117 Answers

Probablt just wiggled loose and then maybe when it did it trashed the wire as well. I had that happen to me once. Next time torque down the plugs and if you have aluminum heads use a good anti seize compound. I've even heard the liquid calcium based stomache items like Milk of Magnesium will work great as an antiseize compound as calcium does not react with thing at high temps.

There is a trick to getting the spark plug wire back together right. The heavy gauge wire goes around the plug. THAT boot needs to be pulled back half a foot or so then you can take the heavy gauge wire and one side is a sharpened poking end that pierces into the sp wire itself. Then pull the boot down back over it... that is ALL that keeps that connection together, That's why manuals are so fussy about how they are removed and reccommend a tool for doing this.

Posted on Jul 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I get a spark plug wiring diagram for a 1998 land rover range rover 4.0 V8? I can't find anything by googling it..


There is a single High Tension Lead that goes from the spark plug cap to the coil pack.

Or do you mean firing order from coil pack to plugs? Which wire goes from what cylinder to which coil?

firing order 1998 land rover range rover 4 0 V8 Google Search

Nov 28, 2016 | Land Rover Cars & Trucks

1 Answer

02 land rover discovery turns over but wont start


OTHER THAN A MECHANICAL PROBLEM THERE ARE 2 THINGS THAT KEEP YOUR CAR FROM RUNNING, 1 No Spark, 2 No fuel. To check fuel open the air intake and squirt a little fuel into the air intake if the car starts or at least fires you probably have a loss of fuel.. The spark problem, You need to find out if the spark plugs are firing.. if they are not firing the car will not start.. THEN YOU MUST FIND OUT WHY THERE IS NO FUEL OR NO SPARK, BUT FIRST Isolate the system THAT IS NOT functioning.


Mar 07, 2014 | 2002 Land Rover Discovery Series II

1 Answer

2005 Range Rover BMW Engine V8. Wanted to change the spark plugs. Anyone have instructions on this?


1. Disconnect battery, neg lead, you must wait 2 minutes after car is turned off before doing so, 2. Remove ignition coil pack from spark plug 3. Remove plug, 4. Gap new plugs, torque to 23 ft/lbs 5. Refit ignition coils 6. Reconnect battery neg lead

Jan 08, 2013 | Land Rover Range Rover Cars & Trucks

2 Answers

Firing order range rover 40ltr v8 p38


Passenger side front to rear 2,4,6,8, driver side 1,3,5,7. Distributer rotates clockwise. Number 1 is usually marked on the cap.
firing_order-1.jpg Leads for distributor cap should be connected as illustrated.
RH - Right Hand side of engine, when viewed from rear.
LH - Left Hand side of engine, when viewed from rear.
firing_order-2.jpg

Feb 06, 2010 | 1995 Land Rover Range Rover

1 Answer

Hi i have a spark from coil to distributer cap but cant get spark at any of my plugs changed all plugs and cap and rotary arm even tried crank sensor but still wont start?any ideas w reg 1.8 petrol


take cap off have someone crank and see if rotor is turning if it is not check to see if rotor is stripped or if shaft is not turning pull distributor out of block and check cam gear

Aug 16, 2009 | 2002 Land Rover Freelander

1 Answer

Rover45


Change your ignition switch and check plugs for spark

Jul 15, 2009 | 1995 Land Rover Discovery

2 Answers

On lpg vehicle backfires and blows intake pipe to pieces


Hi LPG is very dependent apon plugs and lead quality, the first thing to do is replace them both with new, it may very well cure the fault.

Jan 31, 2009 | 1994 Land Rover Discovery

1 Answer

1995 Land Rover Discovery 3.9L V8 Not Starting


Check the distributor position when the engine is turned to TDC , the rotor should be facing close to no. 1 spark plug lead.Try spray some quick start spray in the inlet and see if it takes , if so then your fuel return is dumping too much fuel.The older pressure regulators were adjustable by a small screw next to the diaphragm.

Dec 12, 2008 | 1995 Land Rover Discovery

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hummer Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Hummer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...