Question about Cars & Trucks
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The tire pressure monitor detects any changes in the tire inflation
pressure. Therefore, it must initialize and store it in its memory if
the tires or wheels have been replaced, re-inflated or the tires have
been rotated. You should be able to re-initialize the system by following these
1. check and make sure that your tires are inflated to the correct pressure
2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.
3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.
4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.
Posted on Aug 12, 2009
Testimonial: "Thanks so much!"
Tire pressure always changes...
when you drive your vehicle for a long period of time the tires' temperature goes up along with the
pressure in your tires, the molecules in the air inside your tires get excited (hot)
when your vehicle is immobile for a while your tires' temperature goes down along with the
pressure in your tires, the molecules in the air inside your tires get compacted (cold)
This is the best time to get a true PSI reading from your tires....
the recommended tire pressure on most tires should be set at 35PSI
But there might be a problem with your sensors, I work with TOYOTA their sensors are set up to
where when the PSI on your tires drops below the 35PSI, the tire pressure light would then
You should also check if your spare tire comes equipped with pressure sensors, which in most cases
they do, depending on the type of tire the PSI on spare tires will usually range from 35PSI- 80PSI
you can check your owners manual for this, or simply read the recommended PSI written on the
Posted on Mar 05, 2009
the manufactor puts a sticker on the passengers side rear door with recommended tire pressure.if you want a smoother ride then decrease the rear tires by 2 lbs,so if the front is supposed to be 35 lbs,put 33 lbs in the rear.try to keep the 2 rear tires the same exact and the two front the same to keep the tires from wearing un-even..unless you have a air pressure monitor in the system that lets you know when your tires need air,this way feels better.The reason for the difference from front to back in pressure is because of the weight of the engine.
Posted on May 09, 2009
Reset the tire pressure warning, same as you would any service issue. Insert key in ignition, hold wrench button and min button, then start engine.
Posted on Jun 08, 2009
Tips for a great answer:
Jun 18, 2017 | Cars & Trucks
Dec 11, 2016 | Ford Cars & Trucks
Jun 29, 2017 | 2011 Ford Escape
Nov 26, 2013 | Cars & Trucks
Sep 21, 2013 | 2005 Ford Escape
Aug 13, 2017 | 2011 Ford Escape
Feb 11, 2012 | 2008 Ford Focus
Jan 22, 2011 | 2008 Ford Explorer
Jan 17, 2011 | 2008 Ford Escape
Apr 16, 2010 | 2008 Ford Explorer
4,576 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: