I need to know where the timing marks are on a 1997 toyota rav4 2.o litre engine?

follow this link for a video showing change of timing belt , this will show the timing marks etc
Toyota avensis D4D 2 litre diesel timing belt installation

its use timing chain. and the mark is on the chain just follow the chain

wow a Nissan Camry.
what engine, ??????????
what are you doing, we dont know. so..
cam marks? chain marks?
spark timing?

in 1997, most cars have 6 or more marks.

Nissan V6? is it (guessing i am)

• 1995 cc VQ20DE V6
• 2988 cc VQ30DE V6
• 3.0 L VQ30DE-K V6 1999.5?
  
• 3.5 L VQ35DE V6

if doing major cam work , you will need far more that just mark data.

if doing serious work, i recommend the below

1. a real FSM, from NISSAN if Nissan.
2. alldata.com

warning:1
all nissan engines are All Interference
so doing cam work or finding engine dead,
do a leak down test by hand before cranking engine
or bend the valves.
after replacing chain, do a cyl. leak down test (a tool)
and if it fails, the valves were bent, do not crank engine
or the damage WILL cascade $$$$$$$$$$$$$$

you need repair manual.go on line internet look for on line repair manuals should have one with timing marks.

Hi gud am!can i ask for the firing order of toyota 2c engine

the timing marks for the cams are on the rear timing cover (behind the cam sprockets). They are very hard to see, especially the rear cam. Align the cam sprocket marks with rear timing cover. Because this engine is mounted at a 60 degree angle, you must use the marks. Rear cam should feel compression while front cam is free!!

Click on the following free, direct Link. It has the Timing Belt Diagrams for your 1997 Toyota Camry for either the 1.6L or 1.8 DOHC In-Line 4-Cylinder Engines; including Marks and Instructional Diagrams.

Let me know if this helped...

http://www.2carpros.com/car_repair_information/year/1997/make/toyota/model/corolla/1997_toyota_corolla_timing_belt_diagram_marks.htm

Timing Belt "Marks"?
CLICK on the following LINK. It has the Timing Belt Mark(s) Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1997/make/toyota/model/camry/1997_toyota_camry_timing_belt_diagram_marks.htm

If u cannot obtain the itming marks, u mite have to time the engine by first pricnciple. Ensure that #1 cylinder is @ TDC (compression stroke). Install the camshaft making sure that the cam lobes for #1 cylinder are on the lower side and not on the tip of the cam. Also when installing the distributor, ensure that it's set to spark @ #1 cylinder. In modern day vehicles, the distributor can only be fitted one way so theree is no need to time the ignition timing via distributor. If this is too much, u can check the crankshaft & camshaft sprocket for distinct timing markings . This should be checked when the components are clean

compre un tercel 1997 nesesito saver si biene con cierre centralisado y alarma, poeque veo los suich. pero nada funciona