Question about Chevrolet C1500

1 Answer

I have a 1994 chevy 1500 5.7 v-8 motor,it broke the cam shaft.how do i get the rest of the cam shaft out????

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,796 Answers

Hi!!

Click on the link below for step by step instruccions and diagrams to remove the camshaft from the engine.

http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0900c1528008ef26

Good Luck!!

Posted on Jul 14, 2010

  • mainstreetbr Jul 14, 2010

    yes,i know how to get a cam shaft that is 1 piece out. this one snapped in 2 pieces!! how do i get the other half out??????

  • Rene J Solis Jul 14, 2010

    One way to remove the camshaft is pushing it thru the back of the engine where the rear camshaft bearing is. You may need to remove the front camshaft bearing if the camshaft is broken past it. In order to do this, it is necessary to have enough room to maneuver, maybe even remove the engine.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is my camshaft position sensor located on a 2008 chevy aveo


It should be located between the cam shafts. If you remove the Beauty Cover (( that's what they call the cover across the top of the motor. )) And then the Valve Cover. The Cam Sensor will be sitting between the Cam Shafts. Closer to the Intake Cam Shaft.

Aug 16, 2014 | Cars & Trucks

1 Answer

I got a 1994 mercury villager with a 6 cylinder my intake side cam shaft broke off and I wanna know if I has to removed valve to be able to removed the cam shaft


Take the cylinder head off first ,why did camshaft break in the first place ,i suspect the cam belt has stripped teeth and valve s have hit the piston causing the camshaft to break .

Nov 22, 2013 | Cars & Trucks

1 Answer

Chevy 08 cyl 5 7 misfire


Change your spark plugs and your wires if that dont help it check you coils and if they good but still wont fix it than check your cranck shaft senseor and your cam shaft sensor

Mar 15, 2013 | 2001 Chevrolet Silverado 1500

1 Answer

Will a 1994 4L60E camaro transmission fit into a 1999 chevy 1500 ?


I doubt it. Most of the time the truck trans has the mounts in a different place and the tail shaft is a different size.
A trans shop or a salvage yard should be able to tell you for sure. Salvage yards have interchange info.

Jun 26, 2012 | 1994 Chevrolet Camaro

1 Answer

Cant get my distributor installed correctly in 1994 gmc 1500 has a 350 in it?


if you didnot mark rotor orientation before removing pyt engine on top dead center # 1 cyl line roter up to #1 plugwire post on dist cap with a light look down the shaft bore for a slot that matches the end of dist shaft if they do not match p[osition get a long screw driver an turn the shaft in engine until they do then drop dist you may have to turn the rotor backwards about a tooth when you start to drop whn the cam and dist gears mesh it will line up oil pump drive shaft to dist shaft

Mar 30, 2012 | 1994 GMC Sierra

1 Answer

Broken cam shaft


I think the first thing is to find out what else went wrong. It is only the valves that could have been affected depending on where the shaft broke. $1500 seems to be on the high side.

I would ask the dealer to remove the cylinder head then I would take it for reconditioning myself (service. replace valves and cams) and give it back to the dealer for fitting.

Oct 18, 2011 | 1998 Chevrolet Malibu

2 Answers

WHERE IS THE SPEED SENSER ON A 1994 CHEVY 1500


It is in the tail shaft of the transmission. It will stick out at a 45 degree angle on the driver's side of the tail casing.

Sep 29, 2010 | 1994 Chevrolet C1500

1 Answer

Can you put a steering column from a 1997 c/k 1500 chevy truck in a 1994 c/k 1500 chevy truck? I am putting the motor (4.3 V6) from a 1997 c/k 1500 chevy truck into a 1994 c/k 1500 chevy truck. I need...


pick up a chilton book from chapters indago and check the diagrams they might be similar but i believe the wiring is a lot different '
it is likely you will need both manules

Jan 08, 2010 | Chevrolet Chevy Cars & Trucks

1 Answer

Tapping noise near computer 1994 Chevy 1500 Silverado


air recir actuator motor shorted you can reach between blower motor and heater case and unplug a pain to replace

Oct 29, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...