Question about 2006 Cadillac CTS

1 Answer

2006 cadillac CTS 2.8 v6. Two side brake lights went out

Hello,
I have 2006 cadillac CTS 2.8 v6. Two side brake lights went out and don't work only when you use brake pedal, when i use the alarm on the car they flash like they should so the lights are fine. The light in the middle works fine so do the turn signals.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 73 Answers

Im replacing the BPP sensor on one now, Brake Pedal Position sensor

Posted on Aug 23, 2010

  • auto er Aug 23, 2010

    also on these cars brake lights look good but the filament in the bulbs go out they will have light brown discoloration at the base. just replace the bulbs and your good to go. you must remve the trunk liners and 2 10 mm nuts to remove the light fixture

×

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 2006 Cadillac CTS Brake lights out

Hello,
I have 2006 cadillac CTS 2.8 v6. Two side brake lights went out and don't work only when you use brake pedal, when i use the alarm on the car they flash like they should so the lights are fine. The light in the middle works fine so do the turn signals.

Posted on Jul 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

All three brake lights went out at the same time on my 2006 cadillac cts found 15 amp blown fuse in rear fuse box. Replaced twice and as soon as we push on brake pedal fuse blew again.


You have a dead short to ground somewhere on the feed circuit to the brake lights . Your best bet ,take it to a automotive electric shop. Or search finding electrical short on youtube ,an try your hand at fixing it yourself.

Aug 29, 2017 | Cadillac Cars & Trucks

2 Answers

Brakelights dont work car wont shift


THE SHIFTER INTERLOCK RECEIVES ITS SIGNAL FROM THE BRAKELITE SWITCH.. NO BRAKE LIGHTS NO SHIFTY. CHECK THE STOPLITE SWITCH ON THE BRAKE PEDAL ARM

Nov 08, 2013 | 2006 Cadillac CTS

1 Answer

My brake lights went out on my 2006 cadillac cts. i checked the bulbs and the are fine. I located the fuse box under the back seat but have no clue which one to change.


If all the brake light went out at the same time, then i would look at the brake switch. this is located along the brake pedal somewhere. remove it and play with it and see if will get them going again. if you do get the lights to start working, replace the switch. good luck.

Jan 20, 2011 | 2006 Cadillac CTS

1 Answer

Engine coolant temperature sensor


it is on the left side cylinder head...about mid way...between number 2 and number 4 Ignition coils...but lower...below but not under valve cover.

Jul 10, 2010 | 2006 Cadillac CTS

2 Answers

HOW TO REPLACE A BREAK LIGHT SWITCH FOR A 2005 CADILLAC CTS


The brake light switch itself is located on the brake pedal follow it down until you see where it connects and unplug the connection ...after installation make sure the brake light switch is correctly adjusted by having a 2nd person stand behind the vehicle as you press the pedal the light should come on if not adjust the switch higher up by turning the switch inward ..or upwards by screwing it in if it constantly on unscrew it until lights go out and its fairly easy once you actually look at the part and the pedal ...i hope that helps you

Nov 13, 2009 | 2006 Cadillac CTS

1 Answer

Brake lights not working, trunk light does work, how do I fix this probem


Check the fuse for the tail lights, if fuse ok, check the brake light switch under dash near top of brake pedal, might be bad.

Jul 31, 2009 | 2006 Cadillac CTS

2 Answers

2006 Cadillac CTS Brake lights out


Hello,
I have 2006 cadillac CTS 2.8 v6. Two side brake lights went out and don't work only when you use brake pedal, when i use the alarm on the car they flash like they should so the lights are fine. The light in the middle works fine so do the turn signals.

May 02, 2009 | 2006 Cadillac CTS

2 Answers

I have a 2005 Cadillac CTS. Both my brake lights went out and don't work. Turn signal works. Could it be my brake actuator that isn't working or something else? thank you


Check the fuse and see if it isn't blown, if it is good, check the brake switch, it's near the top of the brake pedal on the back side.

Apr 08, 2009 | 2005 Cadillac CTS

Not finding what you are looking for?
2006 Cadillac CTS Logo

Related Topics:

526 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...