Question about 2007 Chevrolet Silverado 1500 2WD

Open Question

Wire color code for a 2009 silverado with a 4.8L on the iat sensor and map sensor

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 37 Answers

SOURCE: what color are the wires for the iat sensor on a

the iat is part of the maf sensor located in the air filter duct or housing. 6 pin connector. pin one color violet/gray is for iat. pin 2 is c-signal rtn yellow/violet. pin 3 maf yellow/violet. pin 4 maf rtn blue. pin 5 ground black/yellow pin 6 circuit breaker fuse 76 blue/brown

Posted on Mar 07, 2009

Ad
  • 12650 Answers

SOURCE: I need to lacted the iat sensor in my 99 chevy

attached to air filter housing it is incorporated into the mass airflow sensor (maf)

Posted on Oct 21, 2009

  • 18 Answers

SOURCE: wire colors for my IAT sensor

red with blue stripe and black... cut the red with blue strip and connect one end of the resistor to the harness side. Then splice the other end of the resistor to the black wire... do not cut it just splice into it.

Posted on Dec 21, 2009

reisdos
  • 1297 Answers

SOURCE: ON A 2009 F150 4.6 3V --NEED TO KNOW WHAT COLOR

should be the yellow/violet and violet/gray


Posted on Mar 24, 2010

gandergmm
  • 145 Answers

SOURCE: looking for witch color wires are the IAT sensor

IAT wires are black and tan. the others are black/white(Ground) pink(IGN) and yellow(signal)

Posted on May 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ford ikon fyjb duratec 1,6 16v engine has these 2 fault codes p0113 and p0107.car starts and rough idles then dies down.what needs to be done and what are these codes?


code p 0107 refers to manifold absolute (MAP) pressure sensor/barometric pressure(BARO) sensor---low input===causes ---wiring short to ground---MAP sensor---BARO sensor---ECM
code p 0113 refers to intake temp temperature(IAT) sensor---circuit malfunction====causes ---wiring open circuit/short to positive---wiring short to ground---ground wire defective --IAT sensor---ECM
take it to an accredited service centre that has experience on your make of car and have it diagnosed

Jan 20, 2017 | Ford Cars & Trucks

1 Answer

2009 Jeep Wrangler 3.8 PO113 code


will cause limphome ,low power, and mpg bad, and CEL glow.
IAT is major sensor on MAP EFI.

the IAT reads too high, id bet it's unplugged.
or was removed and dropped to the pavement and broken inside.
the eCU reports this when the input hits near 5vdc.
this is and open circuit stated.
fell off, wires bad. connector bad. dead open sensor bad.
my fsm has no IAT resistance table. (sad)

my garage is 60f and my sensor reads 16k ohms (16,000)
with hot water (tap at sink) running over it , it might read
3000 ohms, or 3k. it is a NTC sensor, more heat , lower ohms.

the sensor is double locked, so never fall off.
slide red lock up, and mush lever down and pull conn. off sensor.
3 steps.



THE fsm STATES
K21) IAT SIGNAL CIRCUIT SHORTED TO VOLTAGE (12V?)
(K21) IAT SIGNAL CIRCUIT OPEN (FELL OFF?)
(K900) SENSOR GROUND CIRCUIT OPEN (FELL OFF)
IAT SENSOR (BAD)
POWERTRAIN CONTROL MODULE (PCM) nah.

Mar 09, 2014 | 2009 Jeep Wrangler 3.8

1 Answer

I have a 2009 Honda Odyssey. Please show me the color code for IAT sensor, and its position. Thanks


IAT, is the air temp.
this sensor varies by what engine you car has. (and country)

you could just log i to alldata.com and look, its all there.
3.5 L V6 this engine? is common in USA>
out side USA is this
It is equipped with a 2.4 L engine and CVT
vast diffr. engines... no body ever post engine or country so i must as
the questions.
why are you worried, about IAT, just a clue, helps.
the scan tool said its bad?
ok , i logged in for you, looked up this sensor
and this 3.5L has a MAF, Air flow meter near air cleaner.
and guess what , the IAT is inside the MAF !!
why not post the why so we can help,
post symptoms. or, scan codes, or? really

Jan 26, 2014 | 2009 Honda Odyssey LX

1 Answer

NO POWER TO SPARK PLUG toyota noah 2003 showing error code p0105, p0110, p0115. some one help me plz.


code p0105 refers to manifold absolute pressure (MAP) sensor/ barometric pressure (BARO) sensor--circuit malfunction===causes --wiring---MAP sensor--BARO sensor--ECM
code p0110 refers to intake air temperature (IAT) sensor--circuit malfunction===causes---wiring ---IAT sensor--ECM
code po115 refers to engine coolant temperature (ECT) sensor--circuit malfunction===causes---wiring--ECT sensor---ECM

Dec 25, 2013 | Cars & Trucks

1 Answer

What are the color codes for the iat sensor on a 2008 chevy vortec 5.3


The color codes are tan and a tan/black. There are 2 wires that go into the mass air flow sensor, fyi dont buy or put a resistor in this spot, it tells your engine its getting colder air than it actually is and doesnt help anything. If you buy it you will decide to return it, but then you just lost on shipping cost, and a resistor is about a dime in cost.

Dec 19, 2010 | 2008 Chevrolet Silverado 1500 2WD

1 Answer

How to check a 2009 chev cobolt MAF/IAT 5 wire sensor and what should i get for my reading for the 5 wires/


what color are the two wires for the maf/iat sensor in a 5 wire plug on a 2008 cobalt LS 2.2L?

Mar 06, 2010 | 2009 Chevrolet Cobalt

1 Answer

What color are the wires for the iat sensor on a 2009 f-150 w/ 5.4 l


the iat is part of the maf sensor located in the air filter duct or housing. 6 pin connector. pin one color violet/gray is for iat. pin 2 is c-signal rtn yellow/violet. pin 3 maf yellow/violet. pin 4 maf rtn blue. pin 5 ground black/yellow pin 6 circuit breaker fuse 76 blue/brown

Mar 05, 2009 | 2009 Ford F-150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...