Question about 1993 Jeep Grand Cherokee

1 Answer

Need overdrive switch 4.0L straight 6 how much to get fixed

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Contributor
  • 245 Answers

Hello
Ill go by parts and labor where i am at it might be higher or lower where you live labor time is 1.0 one hour time at 125.00 a hour
Parts $86.95= 211.95 plus tax and shop supplys.

Let me know if i can help more

Posted on Jul 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the overdrive switch on the transmission of a 1999 Ford Contour


This is called the "Transmission Range Sensor", or sometimes the "Neutral Safety Switch." It is located on top of the transmission, between the engine and the battery. If it is defective, it can cause a number of problems, including erratic down-shifting out of, and then back in to, overdrive.

If you decide to change this switch, follow this procedure. Set the parking brake and block the wheels to prevent the car from moving. Turn the ignition switch to "On" (don't start the engine), then put the shifter in neutral. Turn the ignition off, then disconnect and remove the battery. Remove the rubber boot between the air intake box and the throttle body. Disconnect the wiring harness from the switch, remove the two 8mm bolts that hold it in, then pull the switch straight up and out. Take note of how it engages the shaft inside the transmission.

Put the new switch in, leaving the bolts loose. (Make sure the two lines on the switch line up with each other. This sets it to the neutral position.) Tighten the bolts, and put everything else back together. Hopefully, this will fix your problem.

Jul 27, 2013 | 1999 Ford Contour

1 Answer

Does a neutral safety switch have anything to do with the overdrive on a 1988 toyota p.u. neither work, someone told me when the overdrive stopped working it was the neutral safety switch.which i have it...


If both stopped working at the same time, then im sure its in the shifter itself. The cable may need to be adjusted or replaced.
Please rate me.

Aug 25, 2010 | 1988 Toyota Pickup

1 Answer

Broken overdrive switch on gear handle on column. what do i need?


this one's easy, you need a new multi switch and it just un plugs by grabbing and simply jerking it straight out
the arm is not expensive and is available at any auto-zone or other similar parts house for around 20 bucks

Sep 02, 2009 | 2001 Ford F150 Styleside SuperCrew

1 Answer

SUZUKI WAGON R THERE IS A MESSAGE ON THE WARNING INDICATOR PANEL WHICH DISPLAYS O/D OFF - ITS A 51 PLATE AUTOMATIC - WHAT DOES IT SIGNIFY AND WHAT DO I NEED TO DO TO FIX IT IF ANYTHING


o/d off means overdrive off. first check your shift there should be a button or switch for turning the overdrive on and off.
with the overdrive off you will not have the overdrive gear when driving. if it is not the switch then there is a problem with either with the wiring or the transmission. hope this helps

Mar 21, 2009 | 1992 Suzuki Sidekick

4 Answers

1997 LAND ROVER RANGE ROVER 4.0


Yes the Land Rover 4.0L Motor is a V6 (6 Cylinder)

Feb 12, 2009 | 1996 Land Rover Range Rover

1 Answer

Overdrive button


from the car manual:

Tum the overdrive switch on for good fuel
economy and smooth driving. If engine braking
is needed in the "D" range or if repeated
upshifting and downshifting between the 3rd
and 4th gear is needed when climbing a
gentle slope, it is recommended that the
overdrive switch be tumed off. Tum the
overdrive switch back on immediately afterward.

When the overdrive switch is tumed on, the
transaxle will automatically upshift to the second,
third and overdrive gears. When the overdrive
switch is tumed off, the transaxle will not
upshift to the overdrive gear. For normal driving,
the selector lever should be left in the "D"
position and the overdrive switch tumed on.
If you need to accelerate rapidly, press the
accelerator pedal all the way to the floor. The
transaxle will automatically shift to a lower gear,
depending on the vehicle speed and load.

Jan 19, 2009 | Hyundai Accent Cars & Trucks

3 Answers

Need a schematic for OD relay/switch 95 volvo 940


Check speesensor at transmission.Have somebody scan it.

Jan 05, 2009 | 1994 Volvo 940

2 Answers

Overdrive button on extend cab ford f150


Problem Solved Look No Longer. Overdrive switch fuse blown, auto door locks not working, fuse after fuse after fuse, chasing wires grrrr. Remove the steering column cover (3 screws from the bottom) opens like a **** shell. Your switch is located on the shift lever, the wire for the switch is routed through the handle and comes out where the shift lever mounts to the column. Look very closely at the wire in this area. Most likely rubbed through. MR

Nov 19, 2008 | 2002 Ford F150 Regular Cab

1 Answer

Hyundai Overdrive wont engage


It is not suggested strip and twist wires. Better take it to an authorized service station to check what causes the problem.Is it OVERDRIVE SWITCH or CRUISE CONTROL MODULE faulty?
Over drive switch has three points. (5 to 4 selects "ON" or 5 to 6 selects "OFF").
Right click on following schematic, "save picture as" to a location in your PC so you have a ZOOM IN view.


CRUISE CONTROL SYSTEM SCHEMATICS
923a890.gif

Jun 27, 2008 | 2001 Hyundai Elantra

Not finding what you are looking for?
1993 Jeep Grand Cherokee Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...