Question about 1999 Chevrolet K1500

Open Question

I want to convert degrees to foot pound on a torque but dont know how can you tell me how

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1214 Answers

SOURCE: torque for valve cover

Usually not over 30 ft-pounds.

Posted on Jan 23, 2009

Ad
dcraig1000
  • 16 Answers

SOURCE: valve cover torque

17 ft lbs

Posted on Jan 23, 2009

SOURCE: need to know cylinder head bolt torque specs

Head Bolt Torque For your 1994 Oldsmobile Cutlass Supreme (3.4L SFI DOHC): clearpixel.gif Foot pounds (Final torque) clearpixel.gif Note: Torque sequence --------- | 6 2 3 7 | | 5 1 4 8 | --------- Step 1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque. clearpixel.gif clearpixel.gif clearpixel.gif Foot pounds (Final torque) clearpixel.gif Note: Torque sequence --------- | 8 4 1 5 | | 7 3 2 6 | front --------- of engine | 6 2 3 7 | | 5 1 4 8 | Step 1: torque to 40 Ft/Lbs --------- Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.

Posted on Feb 07, 2009

stevenhurc
  • 450 Answers

SOURCE: 2000 Isuzu Trooper Specs

Tighten the connecting rod cap nuts
Torque : 54 N·m (5.5 Kg·m/40 lb ft)

Posted on Jul 02, 2009

  • 366 Answers

SOURCE: Conversion kgf.m to foot pounds.

1 kilogram meter = 7.233 013 831 6 pound foot

you can use a online converter like the http://www.onlineconversion.com/torque.htm

3.5 kilogram meter = 25.315 548 411 pound foot
4.5 kilogram meter = 32.548 562 242 pound foot

Posted on Jan 28, 2010

Testimonial: "Thanks,very help full + on line converter info grate. "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Torque Peugeot 206


You will find all the torque specs for your car in the factory repair manual.

Dec 13, 2015 | Peugeot Cars & Trucks

1 Answer

Head torque bolt specs for 2005, 3.5L pacifica. I mean screw cap top block.


Replace bolts and torque to 65 foot pounds and this is the 3rd torque work up to it then turn the bolt to 90 degrees the torque should show 90 foot pounds or better

Apr 21, 2014 | 2005 Chrysler Pacifica

2 Answers

2001 daewoo lanos dual overhead 1.6 liter head bolt torque and sequence


  1. Tighten cylinder head bolts to 25 N.m (18 ft. lbs.). Tighten bolts an additional 70 degrees plus 70 degrees plus 30 degrees using angular torque gauge .
2001-daewoo-lanos-dual-overhead-1-6-vrq3bch1e30nz1jlq5sn5nnt-4-0.gif

Oct 20, 2011 | 2000 Daewoo Lanos

3 Answers

Convert 168 in-lbs into Ft-lbs


Divide by 12 to get the answer.

Dec 24, 2010 | 2000 Chevrolet Impala

1 Answer

Conversion kgf.m to foot pounds.


1 kilogram meter = 7.233 013 831 6 pound foot

you can use a online converter like the http://www.onlineconversion.com/torque.htm

3.5 kilogram meter = 25.315 548 411 pound foot
4.5 kilogram meter = 32.548 562 242 pound foot

Jan 28, 2010 | 2006 Hyundai Santa Fe

1 Answer

92 buick century head bolt tighten sequence?also head bolt torque?also manifold? 3.3l v6 engine thanks


Exhuast manifold torque 38 foot pounds, Head bolts are 38 Foot pounds after you add sealant to the bolts then after torque go another 130 degrees. Tighten center 4 bolts in sequence another 30 degrees. 0b61846.jpg

Nov 26, 2009 | 1992 Buick Century

1 Answer

What does 90 degrees more torque mean


it should be foot pounds of torque or inch pounds of torque. there are two types of torque wrenches foot pounds and inch pounds.

Good Luck

Oct 01, 2009 | 2001 Chevrolet Cavalier

2 Answers

Torque specs for toyota tercel


Hello vienotkelly: The correct Main bolt torque is 42 foot pounds. The connecting rods torque to 29 foot pounds. The torque sequence for the head bolts and the correct way to tighten the bolts are attached to this reply. Thak You for using6bd0ae1.jpg FixYa. Roger

Apr 08, 2009 | 1998 Toyota Tercel

2 Answers

Need to know cylinder head bolt torque specs


Head Bolt Torque For your 1994 Oldsmobile Cutlass Supreme (3.4L SFI DOHC): clearpixel.gif Foot pounds (Final torque) clearpixel.gif Note: Torque sequence --------- | 6 2 3 7 | | 5 1 4 8 | --------- Step 1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque. clearpixel.gif clearpixel.gif clearpixel.gif Foot pounds (Final torque) clearpixel.gif Note: Torque sequence --------- | 8 4 1 5 | | 7 3 2 6 | front --------- of engine | 6 2 3 7 | | 5 1 4 8 | Step 1: torque to 40 Ft/Lbs --------- Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.

Feb 07, 2009 | 1994 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
1999 Chevrolet K1500 Logo

Related Topics:

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...