Question about Volkswagen Passat

1 Answer

2004 VW Passat TDI "emissions workshop!" What is it? and how do I fix it?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,272 Answers

Check the EGR valve. Clean the valve properly there must be carbon build up on it. Clean it and refit the valve then recheck.If still the same problem then check the fuel filter clean it.It must be clogged.If fuel filter is very old.Replace the filter and then check. But if still the same error message,then its related to error code.You will have to get the exact error code detected by getting the car diagnosed at the scan center. At diagnosis center you will receive the errorcode.As per the error code it will detect the exact faulty part in the car dueto which the problem is occurring.For more help :--- at www.autozone.com itsabsolutely free to get car scanned.
You can also get this scanning done first before checking and replacing any part.scanning will give you the exact error code so as per that you can replace the part and the error will be cleared.
Its absolutely free at auto-zone service center and they also deals in parts.So if faulty part detected then you can get it replaced from there center directly.



Thanks. keep updated for any morequery.you can rate this solution and show your appreciation.



Posted on Jul 13, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 462 Answers

SOURCE: what does workshop emission means on a vw passat

I would assume some of the emission component failed and you have to take it to a workshop.

Posted on May 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vw Passat 03 dti.when i accelerate i hit a flat spot


Thread: passat 1.9tdi 115bhp 2000 model excesive flat spots - VW ...

www.vwaudiforum.co.uk/.../21982-passat-1-9tdi-115bhp-2000-model-e...
Apr 8, 2015 - Hi everyone I'm new to this forum stuff so if I'm posting in the wrong place about the wrong thing ,pm me and let me know.I've just bought 1.9 tdi passat 115 bhp ... Thread: 1.9 tdi smoking under acceleration
Apr 9, 2015
Thread: 2004 1.9TDI white smoke
Apr 7, 2015
Thread: Audi a3 2.0 tdi flat spot sluggish
Jan 7, 2013
Flat spots in acceleration when less than 60mph in 6th? 2006 TDi ...
Dec 6, 2010
More results from www.vwaudiforum.co.uk

Sep 28, 2015 | Cars & Trucks

1 Answer

Want a diagrame for a 2004 vw passat 1.9 tdi vacuum


follow this link to VW TDi forum as this is the best place to get your querry answered

May 22, 2014 | 2004 Volkswagen Passat

1 Answer

My 2006 2.0 tdi passat keeps going in limp mode and saying emissions workshop. Can anybody help


hi mate, my 55 plate passat did the same before major problems happened. first turbo went then the oil pressure light came on and the car went into limp mode. before its too late for you and a costly bill can you do the following.
check if your car has a recall for the injector problems which vw are replacing under warenty.
second thing the guy who repaired my turbo told me that these cares have a major fault which caused the turbo to go. the fault is the oil pump failure you must adress this issue as you can get a lot of info on the discussion forms.
my car started with the same problem as you have described the pd engines have a design fault with the oil pump and shaft. this is common causing your turbo to go then the car will start showing oil pressure low please stop engine. educate your self via the forms and act quickly befor you end up with massive bills.
i hope this has helped. trust me vw know about this design fault.you need to change your chain driven oil pump to the new gear driven system which vw have modified. all vag cars have the same problems be it audi skoda vw . my car had the same problem as you have said .started off with emissions then turbo failed thats when i started to investigate this problem . the pd engines was designed by some rookie at vw.

Sep 13, 2012 | 2006 Volkswagen Passat

1 Answer

Volkswagon passat tdi engine problems


hello : my proplem is began after i drive my passat 5 kilometer the EPC yellow light is appear and i dont know what that mean . thanks foer your help .. my passat 2003 model petrol . 2000 cc .
Rami Safran
PALESTINE

Apr 12, 2012 | 2004 Volkswagen Passat

1 Answer

My serpentine belt broke on a 2000, 90 hp Passat TDI. Would you have a diagram (6 pulleys). Thanks


The serpentine belt routing diagram on a 2000 VW Passat 1.9 TDI - 90 HP

tdisline_479.jpg
CS = Crankshaft
F = Fan pulley
Gen = Alternator
T = Tensioner
AC = Air Conditioning
PAS = Power Assisted Steering

WP = Water Pump

Apr 28, 2011 | 2004 Volkswagen Passat

2 Answers

My 2004ntrendline passat tdi is very hard started in morning and when starts is smokey and jumpy warning lght comes up check oil pressure and when drive when started very little power until car heats up...


You need the codes pulled form the vehicles ECU with a scanner. The TDI engine does not do this when running correctly.

There are a number of reasons I can think of why this might happen, some being, Glow Plug/s failure, injection pump problem, such as temperature sensor failed, fuel system air leaks and alternator charging problems..

The alternator has a one way drive pulley that fails often causing unstable idle and belt noise..

Low power indicates the engine is in limp mode needing attention.

Find a garage with a scanner for this VW and allow them to check the vehicle.

Feb 19, 2011 | 2004 Volkswagen Passat

1 Answer

What does workshop emission means on a vw passat 1.9 TDI


I would assume some of the emission component failed and you have to take it to a workshop.

May 16, 2010 | 2005 Volkswagen Passat

2 Answers

1998 vw passat tdi 110 glow plug light not coming on when i turn the ignition on and car wont start. the car was fine till i washed it when i went to move it after washing i had this problem. only washed...


Try this website for resolving car problems by downloading a FREE service manual for your vehicle. This is not an owners manual but a factory mechcanic's manual.

http://ezinearticles.com/?Find-the-Free-Auto-Repair-Manual-You-Need-Online&id=92717

May 01, 2010 | 1998 Volkswagen Passat

2 Answers

2005 VW passat 1.9 TDi "immobiliser activated" on display


There may not be any other way to fix it except to replace your instrument panel. That's where your immobilizer is located. Or you could try this:

Try cold-booting the car. Remove both battery cables from the battery. Short the battery cables together (away from the battery) for about 15 seconds. Reconnect the battery. No guarantees - I found this info at tdiclub.com.

Jul 02, 2009 | 1999 Volkswagen Passat

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

576 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...