Question about 2001 Chevrolet Venture

1 Answer

I need to know how i replace the 5 lug nut studs on the front of a chevy venture?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,586 Answers

If you mean the threaded studs that the lugs screw onto, click my screenname and go to my Tips and Tricks - I wrote up a procedure there on exactly how to do it.

Posted on Jul 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chevy c2500 truck front wheels will not come off


indicates incorrect rims fitted to vehicle and the threads of the studs are jammed in the holes
may required a hefty bash on the back to move the rim off the studs

Sep 19, 2017 | Cars & Trucks

1 Answer

Why is the drivers side rear rotor so loose, can hear it rattle when kick tire. Pulled wheel and everything looks normal can move it freely. None of others are like that. On 1991 chevy lumina euro


Check your studs,they maybe stripped at the end and the lug nuts are not holding the tire against the rotor tight,replace all 5 studs and all 5 lug nuts and see if it solves your problem.

Apr 23, 2017 | Cars & Trucks

2 Answers

How do I replace all five lug nuts on front driver side wheel?


They are pressed in from the backside of the wheel hub that the studs stick out from. And not like needing a heavy press- once you get the old studs driven out (usually works with a hammer or small mallet), you can easily draw the new studs right into a snug fit by using the lug nuts, the new ones you just bought along with the 5 new studs, available at most any parts store.

See it's not the lug nuts that are broken, those nuts tighten the tire to the hub by the lug nut studs that the tire fits over. It is the studs themselves that are breaking off. This is common enough that parts stores carry replacements. A chevy dealership might have just your size in stock, if you don't mind paying extra high dealership charges, but it might not be that much for these rather inexpensive items. In a lot of cases, the studs can be removed from the hub as it sits, but there are cases where the hub must be removed from the vehicle for stud replacement. You can eyeball it and pretty much tell if the studs can be removed easily, after you take the wheel (tire) off. For any work on the vehicle, don't rely on the jack. Use blocks or jack-stands always.

Oct 25, 2015 | 2000 GMC Jimmy

1 Answer

How to replace lug studs


You will need a special tool to press the lug studs in and out of the flange, or you can follow these directions;

First you will have to pound the broken lug stud(s) out of the wheel hub/flange, use a punch or a drift that is a little smaller in diameter than the lug stud, and be sure that you do not pound on the flange itself, then you will need a lug nut and about a half an inch thick of flat washers.

1. Insert the new lug stud through the wheel hub from behind so that the threaded end is facing out towards you and then put some grease on the threads.

2. Then slip the flat washers onto the lug stud followed by the lug nut, and run the lug nut down backwards with the flat end of the lug nut towards the flat washers to take up the slack and use plenty of grease on the threads.

3. Then using a breaker bar tighten the lug nut until it pulls the lug stud through the wheel hub and it is flush with the wheel hub.

Be sure that the amount of flat washers used will make up for any non-threaded part of the lug stud that might stick out past the wheel hub preventing the lug nut from pulling the lug stud all the way through the wheel hub, and basically you do not want the lug nut to run out of threads before it can pull the lug stud flush with the wheel hub.

Let me know if you require any further assistance.

Jul 31, 2010 | 1994 Honda Civic

1 Answer

I need to know what are the bolts are called that the lug nuts go on a vehicle? I thought that it was the rotor. Mine has stripped.


You require "lug studs" to be able to install a lug nut to secure the tire.

You will need a special tool to press the lug studs in and out of the flange, or you can follow these directions;

First you will have to pound the broken lug stud(s) out of the wheel hub, use a punch or a drift that is a little smaller in diameter than the lug stud, and be sure that you do not pound on the flange itself, then you will need a lug nut and about a half an inch thick of flat washers.

1. Insert the new lug stud through the wheel hub from behind so that the threaded end is facing out towards you and then put some grease on the threads.

2. Then slip the flat washers onto the lug stud followed by the lug nut, and run the lug nut down backwards with the flat end of the lug nut towards the flat washers to take up the slack and use plenty of grease on the threads.

3. Then using a breaker bar tighten the lug nut until it pulls the lug stud through the wheel hub and it is flush with the wheel hub.

Be sure that the amount of flat washers used will make up for any non-threaded part of the lug stud that might stick out past the wheel hub preventing the lug nut from pulling the lug stud all the way through the wheel hub, and basically you do not want the lug nut to run out of threads before it can pull the lug stud flush with the wheel hub.

Let me know if you require any further assistance.

Jul 30, 2010 | 1999 Mazda Millenia

2 Answers

The stud on the Right Front Rotor is turning how do i fix it?


Hi, what you will need to do is take 5 to 6 washers and take the wheel off and put the washers on over the stud that is loose and take a lug nut and tighten it down till it pulls the stud back into the hub. if it does not tighten up and spins you will need to replace it. just take the brake caliper and bracket off and the rotor. then pound the old stud out and insert the new one then use the washers and lug nut to pull the stud into the hub. good luck

May 21, 2010 | 2003 Dodge Grand Caravan AWD

1 Answer

I broke a lug nut and I need to know how to get off the back plate to get to lug nut


If you mean the stud is broken where the lug nuts screws in to, all you need is a 5 pound hammer and hammer the stud till it breaks free from the wheel hub. With the new stud, just place back in place and use the nut to pull it back in to a press fit to the hub. Good luck and should be a 10 min fix.

Nov 25, 2009 | 1994 Toyota Camry

1 Answer

Have broken studs on the front passenger side and need to know how to replace.


I assume that you are referring to the wheel studs and if so you will have to remove the wheel, the brake caliper, the brake caliper stand and the brake rotor. Drive the old stud out with a hammer. Make sure you purchase new lug nuts with the studs. If they are the acorn style, buy one that is not to help with installation. Slide the new stud in the hole from the rear of the flange, install some washers for clearance of the stud shoulder. Install the non acorn style lug nut on the stud backwards. Using a impact gun, pull the stud through. Remove the backwards lug nut and washers.

Jul 26, 2009 | 1989 Nissan Maxima

1 Answer

Broken lug nut stud on 98 civic dx coupe


knock it out... use an old nut that will fit the new stud and install the stud. the nut will pull the stud in tight to the flange.

Jul 19, 2009 | 1998 Honda Civic

1 Answer

1990 Sentra How it remove and replace lug studs on front wheel


there is a large nut that holds that hub on. Remove the cotter pin and the cap from the bolt... remove the bolt and the hub comes off.

Robert

Feb 27, 2009 | 1990 Nissan Sentra

Not finding what you are looking for?
2001 Chevrolet Venture Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...