Question about 1993 Mazda Protege

1 Answer

Power problem my car has no power going anywhere but to the rear door lights. just got a new battery, yet cant get the car to start, hazards to work or anything. i need help

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 5,763 Answers

I would start by checking all the fuses first then make sure the battery connections are on correctly and are also clean and tight, you may have a bad starter but you should be getting power to headlights and dash lights, if theres no power anywhere but the rear door then theres a bad fuse somewhere, but if the headlights work and brake lights and dash lights and the heater blower motor all work then you may have a bad starter, make sure to have the key on when checking these things.

Posted on Jul 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New battery In mercedes no power


I'm not a car mechanic, but, it sounds like you might want to check the fuse to the ignition switch, and, if that fails, it might be a problem with the Start Safety Switch on the transmission. Good luck.

May 02, 2017 | Mercedes-Benz S-Class Cars & Trucks

1 Answer

Won't start key stuck in ignition gas and temp gauge not working


this sounds like something is draining the battery like a bad alternator. if you install a new battery the car will run until the car drains the battery due to a bad alternator or bad wiring, these cars are all electronic so without a good battery you cant open door or start, take a look at battery and if it is low or dead again then have the charging system checked.

Dec 01, 2013 | Cadillac CTS Cars & Trucks

1 Answer

Fuse diagram


It may be easier to just disconnect the battery at night. You could even buy a disconnect switch.
The siren is powered by a 10 or 15amp fuse number 12, but you would still have the hazard lights flashing. That is a different fuse. The actual keyless entry and alarm module gets power from several sources.

Jun 17, 2013 | 2001 Hyundai Santa Fe

2 Answers

My 1993 Toyota Tercel does not start when key is turned. New battery, all fuses checked and fine. When the doors get opened, hazard lights start blinking for 15 blinks, then pause, then 15 blinks. This...


This sounds like a starter disable feature of a car alarm. Somewhere under the dash you are going to find a box with the start wires running to it. The start wire is black with a white stripe and is thick, about a 12 gauge wire. It will come from the ignition switch and run into a relay or box. It could be installed anywhere as it is aftermarket. Once you find it, you can reconnect both ends of the starter wire and you can start it with the key. I would disconnect the power to the alarm or your lights are going to flash at random. The factory alarm (just in case it is the issue, but that isn't likely) is located behind the radio and ashtray.

Dec 14, 2010 | Toyota Tercel Cars & Trucks

2 Answers

Hazard lights flashing car wont start


Since there are two separate problems that occurred during the battery transition, try as we may, we all make mistakes. Go over the wires that you soldered again. I know you already did that but look for two wired similar. But with one difference. More aptly...a green wire with a black tracer, and a black wire with a green tracer. Or a similar scenario. It's a subtle difference. But the old adage of killing two birds with one stone. Probe the wires with the ignition off to see which one has constant power (going to the hazards) and look for it's counterpart.

Mar 15, 2010 | 2001 Land Rover Discovery Series II

1 Answer

Chevy 1996 Tahoe 4X4 trouble code?


dear friend:if your battery voltage measures more than 12v it appears to be ok,but it sounds that your not getting this power threw the system,remove both the cables from the battery and clean properly replace and secure,this might solve your problem

Sep 22, 2009 | Cars & Trucks

2 Answers

Car is dead but battery is good


i would start by checking my battery terminaals and the battery cables themselves.

Jan 19, 2009 | 1995 Toyota Camry

1 Answer

94 Camry Wagon ignition blocked, doors self-lock, flashers on


you may have had a bad connection at the battery that would cause this kind of problem

Dec 14, 2008 | 1994 Toyota Camry

1 Answer

1997 Jetta will not start with abrand new battery!


Dont have a clue about the hazards but the connections on the starter could be bad

Nov 03, 2008 | 1997 Volkswagen Jetta

Not finding what you are looking for?
1993 Mazda Protege Logo

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...