Question about 2001 Dodge Intrepid

1 Answer

How to change the radiator fan? - 2001 Dodge Intrepid

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 17,970 Answers

Electric Engine Fan - Fan Switch

Removal & Installation
2.7L Engine

  1. Disconnect negative battery cable.
  2. Partially drain cooling system.
  3. Disconnect the electrical connector .
  4. Remove engine coolant sensor from coolant outlet tube .
To install:
  1. Apply thread sealant to sensor threads.
  2. Install engine coolant temperature sensor into coolant outlet tube.
  3. Tighten sensor to 20 ft. lbs.(28 Nm) torque.
  4. Connect electrical connector to engine coolant temperature sensor .

3.2L And 3.5L Engines
  1. Disconnect negative battery cable.
  2. Partially drain cooling system.
  3. With the engine cold, disconnect coolant sensor electrical connector.
  4. Remove sensor.
To install:
  1. Install engine coolant temperature sensor.
  2. Tighten sensor to 20 ft. lbs.(28 Nm) torque.
  3. Attach electrical connector to sensor.
  4. Connect negative battery cable.
Removal & Installation
  1. Disconnect negative battery cable.
  2. Partially drain cooling system.
  3. Remove upper radiator hose.
  4. Disconnect cooling fan electrical connector.
  5. Remove cooling fan mounting bolts.
  6. Remove radiator cooling fan assembly from vehicle.

    how to change the radiator fan? - f9d971c.jpg
    Fig. Removal and installation of the radiator fan-2.7L Engine shown
To install:
  1. Position radiator cooling fan assembly in vehicle.
  2. Install cooling fan mounting bolts. Tighten to 50 inch lbs. (6 Nm)
  3. Connect cooling fan electrical connector.
  4. Install upper radiator hose .
  5. Fill cooling system.
  6. Operate engine until it reaches normal operating temperature.
  7. Check cooling system and automatic transmission for correct fluid levels.

Hope helps (remember comment and rated this).

Posted on Jul 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 Volvo S70 radiator fan doesn't work.


Check the relay switch, change the radiator cap of the expansion tank. Pressure lost through the cap with not activate the radiator fan.

Apr 11, 2014 | 1998 Volvo S70

2 Answers

I have a Bmw C318 and when I am stuck in traffic jam my radiator fan is not running enough to cool the engine and i changed the thermostat and the radiator fan new but remained the same.And when i start...


Check the temp. sensor with a digital voltmeter.never use a test light on a comuterized car.should read same voltage on both terminals when fan energized. Highly suspect coolant temp. sensor @ radiator.

Nov 08, 2013 | BMW Cars & Trucks

1 Answer

How a cooling fan should work


The cooling fan is thermostatically controlled and enerised once the radiator/engine temperature exceeds that of the thermostat controlling th the fan. If the fan is coming on prior to the engine reching the operational temperature, then either the thermostat is not functioning or ha been wired incorrectly into the system the radiator was changed.`

Jun 09, 2012 | 2001 Toyota Camry

1 Answer

Envoy cant get to water pump to change it. Removed grill exc but can't get radiator out and fan out


The fan and fan shroud need to be removed as one assembly. You will need a 34mm wrench to get the fan clutch removed from the water pump. Once the fan clutch is unthreaded and the bolts that hold the fan shroud to the radiator are removed you will be able to remove the fan clutch/ shroud assembly from the vehicle. You do not need to remove the radiator nor can you remove the radiator without first removing the clutch/shroud. You will notice that when you are removing it it will be a little tight getting around the inlet for the upper hose on the radiator . Once the shroud is removed trim a notch where the shroud was hitting on the inlet and I will make install a lot easier. If you have any questions let me know. Thank you for using fixya.com!

Oct 22, 2011 | 2004 GMC Envoy

1 Answer

I have a 1999 vw passat and i need to remove the radiator in order to change the fan. how do i remove the radiator?


Well, there is a catch 22 to your plan. In order to remove the radiator you have to remove the fan first. Check around the housing for the fan, you should find plastic pressure clips that hold the fan in place. Release the clips and you should be able to lift the fan housing and shroud out or drop it through to the bottom of the vehicle. To remove the radiator you have to remove the fan shroud and fan in order to locate and remove the retaining bolts for the radiator. There are usually 2 on the bottom of the Radiator sometimes accessible from the bottom of the vehicle and 2 near the top of the radiator, usually covered by the fan shroud.

Apr 23, 2011 | 1999 Volkswagen Passat

1 Answer

How do you change a cooling fan motor? I can't get it off the fan shroud.


You must drain the coolant from the radiator by unscrewing the drain on the drivers side of the radiator, remove the radiator hold downs (10mm) and pull up the radiator carefully to remove the 4 10mm bolts that hold the fan to the radiator, the fan unplugs right at the motor.

May 17, 2010 | 1994 Ford Escort

1 Answer

The fan on my Toyota Corolla is not running. I just changed the radiator and refilled the coolant. Shouldn't it run immediately I switch on? How can I tell if the fuse has blown?


What has the radiator got to do with the fan coming on? There may be a bad fan switch,screwed into the radiator,but you wouldn't change the radiator,only the sw ,if bad. You could jump the fan sw wires,turn key on, to test for a bad sw and a working fan

Mar 25, 2010 | 1990 Toyota Corolla

1 Answer

Changing radiator - is it hard to do


Changing a radiator is a fairly easy task. It involves removing the fan shroud, fan, and the cover that holds the radiator in. drain the radiator, remove the hoses, and lift out. Installation is reverse of removal.

Oct 16, 2009 | 1995 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
2001 Dodge Intrepid Logo

554 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...