Question about 2002 Buick LeSabre

1 Answer

PASSENGER SIDE REAR WINDOW WILL NOT STAY CLOSED. WILL NOT CLOSE WHEN SWITCH IS IN THE CLOSE POSITION.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 200 Answers

Most likely the window regulator is bad the buicks have a lot of problems and most of the time it is the cable but you usually have to buy it as a unit with the motor.

Posted on Jul 13, 2010

Testimonial: "THANK YOU. I WAS ABLE TO REMOVE THE INSIDE COVER AND LINER AND FOUND A CABLE WRAPPED AROUND SOME- THING. WAS ABLE TO MOVE THE WINDOW GLASS BY HAND (TO THE CLOSED POSITION AND PUT EVERYTHING BACK AND WILL HAVE TO HAVE A MEC IN NIC TO REPLACE IT. THANKS AGAIN. OH THAT IS MECHANIC..... )"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 passenger side widow won't go up


Faulty switch on passenger door, take out and replace or clean with crc cleaner

Oct 09, 2012 | 2007 Nissan Altima 3.5 Sedan

1 Answer

Rear passenger door won't stay closed


Door latch on door itself is in closed position if it will not close at all. In this case, open door and pull outside handle hard to pop open door latch. If you have door opening at random, door latch needs replacing or door catch on body is loose.

Jul 29, 2012 | 2003 Chevrolet TrailBlazer

1 Answer

Yesterday I had the passenger's side window motor


Disconnecting the battery will cause this. It happened on my Mazda 6 and there should be instructions in your manual.
It will be something like this:

1. Turn ignition switch to "on" position.
2. Open passenger window completely from passenger side window switch.
3. Close passenger window completely from passenger side window switch, and hold switch for an additional 2 seconds.
4. Turn ignition back to "lock" position.

May 12, 2012 | 1992 Lexus Sc 400

1 Answer

My 2003 Cadillac Deville power windows are not working correctly. I noticed last week my rear passenger window switch didn't work, but could open and close with driver switch. Now, drivers rear and front...


Hi! You may want to start spraying contact cleaners on the control switches. If these switches are seldomly used this issues happens. Try it and see how it goes. Hope this helps and thank you for using FixYa!

Aug 28, 2010 | 1997 Oldsmobile Cutlass Supreme

2 Answers

Passenger window won't work using the driver side control switch


Open the window with the local button and keep the button pressed for 3 seconds after it has fully opened. Then close the window and keep the button pressed for 3 seconds after it has fully closed. This calibrates the position of the window which it lost when you changed the battery. Good luck

Mar 19, 2010 | 2006 Mazda 6

1 Answer

Rear passenger window on my 2003 ford expedition


replace the window mechanism on that door

Oct 12, 2009 | 2003 Ford Expedition

1 Answer

Rear window slipping down about 1 inch, but still on the track.


The Regulator will fix the problem. The tracks might also need a little adjustment.(loosen bolts move track then retighten) Try holding the window while you are rasing it you might be able to guide it up so that it will close a bit more.

May 17, 2009 | 2000 Oldsmobile Alero

2 Answers

New battery in 06 mazda 6


1. Turn ignition switch to "on" position.
2. Open passenger window completely from passenger side window switch.
3. Close passenger window completely from passenger side window switch, and hold switch for an additional 2 seconds.
4. Turn ignition back to "lock" position.

That's it. Works like a champ. And here you thought it was more than just a battery dying....I did.

Aug 11, 2008 | 2006 Mazda 6

Not finding what you are looking for?
2002 Buick LeSabre Logo

Related Topics:

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...