Question about 1998 Acura RL
You need to get the serial number off the sticker attached to the radio. It will require pulling apart your dash. Call an Acura dealership with that serial number and they should be able to provide you the code. Or you can take it directly to the dealer but you will be charged labor.
Posted on Aug 12, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: need code
there are 2 screws in the change area beneath the ashtray...remove those and then carefully pull the center console out. I like to start from the rear (closer to the emergency brake). Push the whole console in towards the radio a little as you pull the rear up. It's one piece and will snap out...get that out of the way and then I think it's one screw holding the radio in.
Remove the radio...on the back is the serial number. Call Acura of Augusta - (706) 737-5200 - or a local Acura dealer BESIDES the one you went to!
Posted on Mar 12, 2009
SOURCE: Lost code for my 1998 acura cl
You have to call the dealer and give them your vin# they tell You P.S. DO NOT TRY AND PUT IN A CODE THREE STRIKES AND YOU OUT. BUT I CAN FIX THAT TOO ONCE YOU GET YOUR CODE . I hope that helped.
Posted on Jun 25, 2009
THIS IS REAL SIMPLE I HAVE DONE THE SAME THING TO INSTALL THE IPOD INTERFACE MANY TIMES.. STEP 1 MOVE BOTH FRONT SEATS ALL THE WAY UP TO ALLOW U TO HAVE SPACE STEP 2 LOOK UNDER THE SEATS AT THE BASE AND U WILL SEE 2 BUTTON STYLE CLIPPS 1 ON EACH SIDE OF THE SEAT, PLACE YOUR FINGERS ON THE SIDE OF THE BUTTON AND PULL IT TOWARDS YOU,AND AT THE SAME TIME LIFT THE SEAT.. REPEAT THAT STEP FOR BOTH SIDES AND THE SEAT FLIPS RIGHT OUT
Posted on Apr 19, 2010
You cann't remove only radio you have to remove whole panel which contains radio.
There are two possible scenarios for you car radio panel
1. Your car can have Navigator, Climate Controller and Radio.
2. Your car can have Climate Controller and Radio.
You have to open whole panel.
This Panel contains some of SRS components, so have to be very careful while removing it!
Please search for "Acura RL Service Manual"
Follow this link you will be able to download it for free.
Posted on May 21, 2010
Tips for a great answer:
Nov 03, 2013 | 1998 Acura RL
Mar 20, 2011 | 1998 Acura RL
Mar 01, 2011 | 1998 Acura RL
Oct 10, 2010 | 1998 Acura RL
Apr 27, 2010 | 1997 Acura RL
Mar 30, 2010 | 1997 Acura RL
Mar 14, 2010 | 1998 Acura RL
Feb 12, 2010 | 1998 Acura RL
Oct 07, 2009 | 1998 Acura RL
264 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: