Question about Dodge Stratus

1 Answer

Trying to find belt diagram for 2005 dodge stratus sxt 2.7L dohc. flex fuel. i just want to find tensioner pulley so i can change alternator without removing radiator hoses or a/c lines.

Posted by on

  • Steve Hart
    Steve Hart Jul 13, 2010

    #7 is the tensioner pulley Turn to the left to relese the belt

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Contributor
  • 245 Answers

trying to find belt diagram for 2005 dodge stratus - belt_1.gif
#7 is the tensioner pulley turn to the left to relese

Posted on Jul 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Dodge Stratus changing the Alternator but cant get the belt tensioner off even with tool


You don't take the tensioner off, you release the tension by moving the tensioner then slip the belt off the pulleys while keeping the belt tensioner released.

Aug 07, 2016 | Dodge Cars & Trucks

1 Answer

How do I loosen belt to replace Altenator


The tension pulley is the one that is not driving anything, and has a large spring assemble attached. At the centre on the (cllosed) side there should be a 1/2" square hole that will receive your torsion bar. Pull the pulley assembly so that the belt is released,and remove the bely.

Aug 16, 2015 | 2005 Dodge Stratus Sedan

1 Answer

Power steering pulley or tensioner pulley?


Take the tension off the belt and then move each pulley by hand . If the tensioner pulley feels rough or makes a noise, replace it. Same goes for the power steering, although the pump may be noisy without the pulley feeling loose.

Nov 17, 2014 | 2005 Dodge Neon SXT

1 Answer

How to set timing on 2006 dodge stratus sxt 2.4l ?


  1. Set the crankshaft sprocket at TDC by aligning the sprocket with the arrow on the oil pump housing.
  2. Set the camshafts timing marks so that the exhaust camshaft sprocket is a 1 / 2 notch below the intake camshaft sprocket.
  3. Use an Allen wrench on the tensioner. Rotate the tensioner counterclockwise while pushing on the wrench until it slides into the locking hole.
  4. This will allow you to slide your belt on. Hope this helps.
c0c023c2-a3ec-4ead-84df-d57ae04b18b8.gif

May 27, 2014 | 2006 Dodge Stratus

1 Answer

2005 dodge stratus r/t tensioner pulley and belt issue


ARE YOU POSITIVE THE SERP BELT IS NOT SLIPPING OFF THE CRANK PULLEY? I USE A STRIP OF DUCT TAPE TO HOLD IT ON THE PULLEY AS I FEED THE REST AROUND.

YOU SHOULD END UP WITH THE BELT TIGHT AND MUST THEN (USING A SERPENTINE IDLER PULLEY TOOL) RELEASE TENSION IN ORDER TO GET IT OVER THE CLOSEST, MOST CONVENIENT PULLEY...THEN RELEASE TOOL TENSION AND BELT SHOULD BE ON.
***FEEL FOR PROPER TENSION ON IDLER PULLEY (SERP BELT) IT MAY BE SHOT

Dec 20, 2013 | Cars & Trucks

1 Answer

How do i tighten the timing belt tension on a 1999 dodge stratus


The belt tensioner is not adjustable. To loosen a tensioner you would swivel the belt tensioner away from the belt with a long flex wrench or ratchet and to tighten the belt you would let the spring in the tensioner move the swivel back into the tight position. An internal spring tightens the tensioner pulley against the belt. You will need to get a smaller belt or replace the tensioner if the belt is "too loose" after you swivel it back into the tight position against the belt and release pressure.

Oct 19, 2012 | 1999 Dodge Stratus

1 Answer

05 dodge stratus change timming belt 2.4ltr


Click on the following direct, free Link. It has the Timing Belt + Mark Diagrams for your 2005 Dodge Stratus (with the unspecified: SOHC (Coupe) and DOHC (Sedan)) 2.4L In-Line 4-Cylinder Engine. Is also has additional - very helpful Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2005/make/dodge/model/stratus/2005_dodge_stratus_timing_belt_diagram_marks.htm



Apr 09, 2010 | 2005 Dodge Stratus

1 Answer

Having carpenter tools to change timming belt


GENERAL/Standard Rules to Removal the Serpentine Belt with a Tensioner:
A. Find the Tensioner(s). (See Diagrams on Link)
B. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
C. Remove the loosened belt off one of the other more easily accessed Pulleys.
D. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with Tensioners:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

Mar 31, 2010 | 2005 Dodge Stratus

1 Answer

2003 Dodge Stratus SXT 2.4L DOHC won't start


sound like it could be fuel. pump or timeing belt. if you put a new fuel filter in be sure to replace the fuel filter

Aug 21, 2009 | 2003 Dodge Stratus

2 Answers

How to change fan blts on 05 stratus 2.4 dohc


You have a diagram on the underside of your hood....use that. But to remove it, you need to loosen the bolt holdiing your alternator in place. What size engine?

Mar 13, 2009 | 2005 Dodge Stratus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

579 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...