Question about 1992 Jeep Wrangler

1 Answer

I was off roading in my '92 jeep wrangler 2.3ltr and hit some big bumps. The engine shut off and now it won't start. I changed the coil but still no spark. What could be my problem?

Posted by on

  • 3 more comments 
  • Steve Hart
    Steve Hart Jul 13, 2010

    Can you tell me if there is spark or fuel?

  • grthomas11 Jul 13, 2010

    There is no spark from the coil. I think it getting fuel. It still needs to be towed home to do some tests. Im just trying to get some ideas. Any help would be great. Thanks

  • grthomas11 Jul 13, 2010

    when i turn the key to the on position no warning lights come not even a seatbelt light. i checked all fuses under the hood there all fine. could it be the ecu?

  • grthomas11 Jul 13, 2010

    I checked every connection I could find and still nothing. The engine just cranks.

  • grthomas11 Jul 14, 2010

    When I turn the key to the on position the fuel pump does not work, no warning lights and the gauges don't work. The fuel gauge is pinned at full.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Contributor
  • 245 Answers

I would start by checking all the fuses and relays under the hood , you can have one or more fuse or relay disconected or loose from the big bump
also go threw chack all electral conections, one or more might have come loose
it would be a good idea to go threw all fuses and conections unplug and plug back in.
Let me know if we need to dig deeper into it but i think you will find a loose conection

Posted on Jul 13, 2010

Testimonial: "After checking all the things I thought were the cause I went over all my fuses like you said and that was right. My jeep runs like before. Thank you"

  • Steve Hart
    Steve Hart Jul 13, 2010

    Hi
    No i dont think its the ecu It sounds like a wire is loose some where under the hood
    I would start at one side of the engine compartmint and check everything!

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1999 Jeep Wrangler Sport quits momentarily when I hit a bump in the road (paved, not off-road). It starts running again in about a second or two. Computer, maybe?


Why would hitting a bump have anything to do with a computer?

Vehicles hit bumps on every road trip

Computer is a solid state board,no moving parts

Mar 13, 2013 | Cars & Trucks

1 Answer

I have a '92 jeep wrangler with a 4-cylinder. When you are driving down the road it surges. Does anyone have some advice on this problem. Could it be or is it the injectors? And do you have to take it...


I dont think there are any injection parts in this 92 engine, just good old carburator. Which is most likely causing the surges. And you should definitely take it to the garage, it could eventuelly blow up and wreck the whole engine for good.

Feb 28, 2011 | 1992 Jeep Wrangler

1 Answer

What does the auto shut off fuse do? 92 Jeep Wrangler is having start up problems.


The auto shutdown relay in your vehicle is controlled by the computer. If the computer does not see a signal from the crank or cam sensor, it will turn off power to the relay which in turn shuts off power to the fuel and ignition system. Unlike those in many passenger vehicles, it's not connected to an impact sensor. (as jeeps are off road vehicles as well as being transportation, if they had an impact sensor, they would be prone to shutdown when traveling over rough off road terrain)
The fuses to the relay are affected by shorting or overload of any components they serve, or by a problem with the relay itself.

Nov 01, 2009 | 1992 Jeep Wrangler

1 Answer

Jeep is dying out when you hit a bump in road it starts but runs real rough and backfires 0nce in a while then dies again restarts everytime


Check the wire that feeds voltage to your ignition system. Check any connectors or plug-ins on that wire. It sounds like you have a bad connection. I've had this happen before, including on my motorcycle! Hope this helps!

Jul 12, 2009 | 1997 Jeep Wrangler

2 Answers

2007 Jeep Wrangler x will not start. put new fuel pump but still will not start. Feul pump does not kick on when key turns>???


check to see if their is any fuses blown or change out the fuel pump relay and also check to see if the ground to the fuel pump is getting a good connection these things should solve your problem.Good luck

Jun 23, 2009 | 2003 Jeep Wrangler

1 Answer

My jeep won't start


You need to find the auto shut down relay (shuts down engine in accidents.) Likely it has triggered I am not sure if yours is re-settable or not but if not you can replace it. Generally this relay is found somewhere at the front of the vehicle, underneath, in the vicinity of the bumper. Anyone that works in a body shop can likely point it out or tell you where to look for yours. I'm sure there are a bunch of off road guys who also know how to bypass these, otherwise they would all have problems banging and bumping their way through rough terrain.Sorry I can't be more specif
good luckic with this but they keep moving them around!

Jan 31, 2009 | 2004 Jeep Wrangler

1 Answer

1998 Jeep Wrangler Electrical Short in Steering Column?


I had a similar problem with my 2000 Jeep TJ and I found the problem in the wiring harness under the hood.several wires were corroded and almost burnt off.If you remove the black tape which keeps the harness bundled together and if you see evidence of "green" type powder or "gook" it's most likely where the wires have faulted.

Dec 12, 2008 | 1988 Jeep Wrangler

Not finding what you are looking for?
1992 Jeep Wrangler Logo

Related Topics:

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...