Question about 1997 Toyota Tacoma

1 Answer

Window on drivers side will not crank up stops about half way up and then handle jams

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 524 Answers

Hi..
this is because of the gear system inside the door panel may be damaged.there is a gear system inside which when you crank the handle wil make the window to raise. this gears teeth may be damaged in halh way so that after this it doesnt engage and brings the window up. the only way is to change the gear system. you wil get the whole assembly in market so you can relace it.


if my answer was useful please vote me

Posted on Jul 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Ford Focus window crank without clip


So the crank handle just came off? There is a clip. you didn't look hard enough. You have to put the clip tool behind the handle and push down to get the clip out. To see it you have to pry back on the door panel and use a flash light.

Mar 31, 2014 | 2000 Ford Focus

1 Answer

I whant to remove the windo handle


To remove window crank handle,

pull the handle toward you exposing the

window crank handle retaining clip on the

back side of the window crank handle. Using

your trim panel removal tool, apply pressure

to the window crank handle retaining clip to
remove the crank handle.

Aug 09, 2012 | 2003 Kia Spectra

1 Answer

Remove the interor of the door


To remove window crank handle,

pull the handle toward you exposing the

window crank handle retaining clip on the

back side of the window crank handle. Using

your trim panel removal tool, apply pressure

to the window crank handle retaining clip to
remove the crank handle.

Aug 09, 2012 | 2005 Kia Spectra

1 Answer

How do I remove window crank handle on 1990 gmc manual window


the best way of doing it with out a special tool is to take a large flat handled screw driver and wedge it between the base of the crank and the door panel making shure you also make shure the black plastic spacer is on the side of the door panel so the clip on the crank is exposed turn the handle to align the clip as desired and use a hooked device or even a small screw driver to pop the retaining clip out..simple...make shure you reinstall the clip back on the crank handle before putting it back on..and then just press it on with a tap from your hand...

Apr 22, 2011 | 2004 GMC Sierra 2500

3 Answers

How do I take the window handle to get the door panel off?


there is a C clip that slides over window crank locking it on to the window crank shaft. A strong tool like a dentist pik that has a hook on it works great !! Or a small long flat screw driver, push in on the door panel by the window crank and look between crank and door panel, you will see this clip on the back of handle. push or pull this clip off the handle and the handle will pull off the window crank shaft. keep an eye on this clip as it like to take flying lesson.( wear safety glasses.) When installing clip, install on window crank in the slits or grooves and just push handle onto crank rod. you might have to hit with rubber mallet (TAP TAP ) make sure it locks on.

Jan 14, 2011 | 1993 Nissan Pickup

2 Answers

How do i take the window knob off when removing the door panel?


Most window cranks require a special tool to remove, because they have a "C" type clip on the back side holding them on, the tool slips between the crank and door panel and pops the clip loose. You can get the tool at about any auto parts store and they dont cost much. Or Ebay for like 5 bucks140.jpgJust do a search on ebay for window crank tool.

Nov 21, 2010 | 1988 Honda Accord 4 Door

1 Answer

1. blower only works on high 2. hand crank


1.blower motor resistor 2.possible damaged handle crank or striped teeth on window regulator 3.possible misfire, possible worn engine mounts

Apr 07, 2010 | 2000 Dodge Caravan

1 Answer

REPLACIND DRIVER SIDE WINDOW REGULATOR


Pull out window crank and door handle, remove panel, remove plastic Nylon that's between metal and panel, crank the window down enough to see the arm and the part that connects with glass. Make sure the metal part inside the door that comes from an arm and attaches to glass is clean, from broken glass and the gap that attaches to window is clean,bend the new glass to make it fit inside the opening slide down the new glass from the top using opening guides, grave it from both sides standing in between and make land on top center of the part that graves the glass, put automotive glass silicone on center of that part,just at where graves the glass, let dry, put the plastic back the door panel the window crank with the "U" shaped lock washer and the door handle, I hope I was clear

Jan 21, 2009 | 2004 Chevrolet Silverado 2500HD

1 Answer

REAR DRIVER'S SIDE DOOR PANEL


There are most likely a couple of screws mabye hidden under a little plug or plastic cover around the door handle and on the under side of the panel.Then if it is a crank style window you will have to remove the window crank handle,after that there are plastic panle pop clips you will just have to pull on panle and they should pop out,then lift the panle up off the window door seal.

Aug 30, 2008 | 2004 Pontiac Grand Prix

1 Answer

How to replace drivers side window motor


I believe you'll need to use a 2.5mm hex to remove all the fastening screws. then if you have a manual hand crank window, use a pick or a small flathead screwdriver, prying at the washer to release the handle. The next step involves using a flathead screwdriver to pry off the sideview mirror adjuster and the cover panel behind. Removing this cover will reveal the final few screws holding the panel to the door.

Jul 13, 2008 | 1997 Volkswagen GTI

Not finding what you are looking for?
1997 Toyota Tacoma Logo

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...