Question about 2000 Hyundai Elantra

1 Answer

2000 hundai , no fuel to filter / engine

2000 hundai , is there a fuel pump relay or a fuse that lets the fuel pump run? new pump is not running

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 68 Answers

There is a relay in the engine compartment relay fuse box should be labeled pull it out look at the relay and jump the same wire the number 30 and 87 on the relay then try and start car. if it don't work check for power there if no power move to the fuse in same compartment.if there is power the installation could be wrong. make sure the ground is properly connected to the frame/body/sending unit.

Posted on Jul 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No fuel to engine


check to see if it has fuel cutoff reset behind the kick panels . Many Fords do

Mar 16, 2017 | Cars & Trucks

1 Answer

My 2000 ford taurus is bucking when taking off"


Check engine timing of cam and crankshaft, inspect your timing belt. check to see if your fuel system is faulty. Check for a clogged fuel filter, or if your fuel pump don't run at all, replace the "fuel pump relay". Sometimes your fuel pump will run, but be too weak to hold pressure, which will let your car idle somewhat, but be too weak to run the engine at speed or under load.

Dec 16, 2013 | 2000 Ford Taurus

3 Answers

How to change a fuel pump in 2004 Volkswagen Jetta


IN THE GAS TAKE BY DROPPING THE TANK OR UNDER THE BACK SEATS IF IT THERE YOU WILL TO REMOVE THE SEATS OUT

Mar 07, 2011 | 2004 Volkswagen Jetta

1 Answer

Honda Civic Coupe. Year 2000 1.6. How can I depressurize the fuel system easily to change the fuel filter situated in the engine compartment.


Hi,

IMPORTANT: Do not skip the fuel system pressure release step. Injury and other damage can result!
Safety Step! Relieving Fuel System Pressure
· allow engine to cool
· relieve fuel system pressure
· put on your eye protection
Before you begin the job of replacing your fuel filter, you must relieve the pressure in your fuel system. A fuel injection system operates under very high pressure. If you don't release this pressure before you start unscrewing fuel lines the result can be explosive. Do this before you attempt to change the fuel filter.
To release the pressure in your fuel lines (and fuel filter) you'll need to locate the fuel pump fuse in the fuse box. If you don't have a fuel pump fuse, find the relay that operates the fuel pump. Once you've found the fuel pump fuse or relay, start the car. With the engine running, pull the fuse or relay out. If you pulled the right one, the engine will quickly die. Since it's using all of the pressurized fuel in the system, the fuel lines won't be pressurized when you crack the fittings on your fuel filter.
Now that you've relieved the fuel pressure you can remove the old fuel filter.
If you didn't do this yet, you must go to the previous step and do it. Very dangerous!

Best regards.

Oct 28, 2010 | 2000 Honda Civic

1 Answer

2000 1500 Sierra will not stay running step on gas act like its running out of gas. Popped top fuel line gas came poured outbut didn't pump out when i rolled the engine over. Got underneath the fuel cell...


Replace the fuel pump and fuel filter to correct the problem you are having. Without the proper fuel pressure the engine will not run at all. Hope this will help you. You might check the fuse/relay panel for a blown fuse or relay in it to make sure you are getting power to fuel pump before you go to the trouble of removing the pump and fuel filter. Hope this will help you.

May 20, 2010 | Cars & Trucks

1 Answer

How do i change the fuel pump on a 1994 mitsubishi galant?


there should be an access panel either underneith the rear seat or in the trunk that should give access to the pump it self but before u start rippin and tearin u need to relive the fuel system of pressure what u can do is pull the fuel pump relay start the car and let it run out of fuel. the relay is prob in the fuse panel on the drivers side. dont quote me on that though. make sure u replace the fuel strainer in the tank and the fuel filter in line to the engine and put the new unit in reverse of dissasembly.

Oct 22, 2009 | 2000 Mitsubishi Galant

3 Answers

1986 BMW 318i;Turns over but engine wont run.I'm


Fuel pump may be getting weak. If pressure is not high enough the injectors wont open.

Jun 27, 2009 | 1986 BMW 3 Series

1 Answer

Fuelpump problem 2000 Suburu outback


check fuel lines for leaks...
good luck

Aug 16, 2008 | 2000 Subaru Outback

Not finding what you are looking for?
2000 Hyundai Elantra Logo

363 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...