Question about 2000 Hyundai Elantra

1 Answer

Will a 97 lantra 1.8 g4gm head fit a 2002 elantra 1.8 g4gm

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 68 Answers

If the casting numbers are the same some of the part numbers are the same dealer for 97 is 22100-23001
and the 2002 is 2210-23701
it all depends on the casting numbers #4c or #7c thats what the difference is don't know exactly the specif differences is though. prolly cam profile

Posted on Jul 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to take bottom hoze off fuel filter on 97 elantra


if its the same as the lantra its in the engine bay passenger side one end is fitted with a not on the fuel line the other is pushed in then held with a small bolt slightly offset from the pipe

Jul 10, 2014 | 1997 Hyundai Elantra

1 Answer

1996 hyundai lantra cylinder head torque spec


dak408_40.gif
Revised Bulletin
This TSB supersedes the Cylinder Head Bolt Torque Specifications previously described in TSB # 96-20-003, TSB # 96-20-003-1 and TSB # 97-20-004.
DESCRIPTION:
This bulletin provides torque specification corrections to the 1996 and 1997 Elantra Shop Manual, 1997 Elantra Service Data Book, 1997 Tiburon Shop Manual and 1997 Tiburon Service Data Book.
Please record the corrections (listed) in the appropriate manuals and write the TSB number on the bottom of the pages listed below for future reference.
CYLINDER HEAD BOLT:
(M10) 30 Nm (300 kg.cm; 22 lb.ft) + (60°to 65°) + (60°to 65°)
(M12) 35 Nm (350 kg.cm; 26 lb.ft) + (60°to 65°) + (60°to 65°)

Nov 21, 2010 | Hyundai Motor 1996 Elantra

1 Answer

I need the cylinder head torque settings for 1997


1998 Hyundai Lantra "G4GM" engine 1795cc.there are two heads or blocks, one is called the M10, other is the M12, figure out which one you have cause the torque is different for stage one by 5nm........... Dont get confused theres 2 different engines so 2 different torques for stage1---------
heres the full details: Stage 1 - m10 = 30nm / m12 = 35nm-------------------------- -------- Stage 2 - tighten by 60-65 degrees ------------ stage 3 - tighten by 60-65 degrees. no sequence is given in the data book for tightening so go off what you thinks right, it doesn't matter on this engine.

Nov 17, 2009 | 1997 Hyundai Elantra

1 Answer

What does the diagnostics plug look like on a 97 lantra/elantra and where do i find i?


Should be right under the dash on the drivers side under the steering wheel, it is kind of oblong oval shaped and may have a plastic cover.

Nov 14, 2009 | 1997 Hyundai Elantra

2 Answers

What is the average cost to replace a radiator in a 1997 Hyundai lantra. Are these low maintainence second hand cars?


Depending on the mileage of the car! Lantra can be a 'high maitenence' car. has it overheated due to the radiator leaking? They blow the head gasket fairly easily! aslo front struts seize. If engine hasnt had regular servicing they sludge up and wear out engine components, engine becomes very tappety and may eventually fail. It all depends if it has been cared for. hopes this helps. Ben

Aug 08, 2009 | 2001 Hyundai Elantra

1 Answer

How do i fit rings to my hyundai lantra 1.8, also wrench setting for engine.


You have to use a ring compressor. Available at any auto parts store.

May 16, 2009 | 1997 Hyundai Elantra

1 Answer

Hyundai Lantra 1994


After some extensive research, it looks as though they have two totally different body styles as well as a few others. The differences are as follows:

Lantra: 1.5L
Elantra: 1.6L or 1.8L engine sizes

Lantra: 2,336 lbs
Elantra: 2,500lbs Weight

Lantra: 11.89 gal
Elantra: 13.7 gal fuel capacity

those are only three differences that i have put up among the many that i have found. Lantra's also seem to be one of those out of states type cars that you find in Australia mostly. The body is also totally different.

Feb 23, 2009 | Hyundai Motor 1994 Elantra

1 Answer

Timing diagram


there is no timing specs for 97 elantra,if you suspect timing check timing belt,for tbelt alignment diagram get a haynes manaul ,there good for the price

Jan 14, 2009 | 1997 Hyundai Elantra

1 Answer

I,ve got a problem starting my 97 hyundai lantra 5dr sedan. i think it has something to do with the switch on the cluth, car normally won,t start unless clutch fully engaged,. i,ve got a new battery and...


try pushing the clutch to the floor with you toes if it starts and won't unless you push to the floor its the clutch start switch 22 bucks at auto zone i will be gettng help installing the new one i will let you know.

Oct 08, 2008 | 1995 Hyundai Elantra

Not finding what you are looking for?
2000 Hyundai Elantra Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...