Question about 2001 Dodge Durango

1 Answer

What is MIL code 1757 on 2001 Dodge Durango? - 2001 Dodge Durango

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 68 Answers

Governor pressure above 3psi in gear with 0mph
possible causes
solenoid pack connector 5v supply circuit open
sensor signal circuit shorted to ground or shorted to voltage
governor pressure sensor defective
transmission fluid burnt or pan has debris
valve body valve sticking or defective
pcm defective

Posted on Jul 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 dodge durango no bus mil. replaced pcm twice and crank position sensor


make sure ground is good and there is no corrosion at the battery posts or post clamps.

Nov 21, 2013 | 1999 Dodge Durango

1 Answer

How to reset check engine on 2002 durango


Resetting a Mil Lamp-- only clears all data
needed to diagnose a possible problem

It in no way fixes a thing

You need a code reader, if you don't want
to loose items you may need,verse removing
a battery cable, then having all sorts of issues

Sep 13, 2013 | 2002 Dodge Durango

1 Answer

Transmission


code po700 refers transmission control system/MIL-malfunction==causes--wiring ---TCM. I would replace the transmission control module.

Sep 06, 2013 | 2004 Dodge Durango

1 Answer

Code P1899 2000 Dodge Durango


try to reset.but if not why shows code.

Feb 24, 2013 | 2000 Dodge Durango

1 Answer

My 2007 dodge with 5.9 diesel is showing engine malfunction light and error code of P1740, failed TCC or overdrive solenoid. The truck seems to run ok in overdrive but I don't understand what the TCC...


Code P1740-Torque converter clutch did not lock up when the PCM sent the command. Enabling conditions: No engine or transmissions codes are present, vehicle speed was under 70 MPH, TPS was under 33% open. When the PCM commanded the torque converter to lock, no change was detected in engine speed. Blocking action: This code can block the following monitors: none.

Testing: Check torque converter solenoid for proper operation.

NUMBER: 21-11-00
GROUP: Transmissions
EFFECTIVE DATE: October 02, 2000
SUBJECT: 46RE Transmission MIL Due To DTC P1740 - TCC or OD Solenoid Performance
OVERVIEW: This bulletin involves the replacement of the transmission pressure boost valve cover plate.
MODELS: 2000 - 2001 (AB) Ram Van 2000 - 2001 (AN) Dakota 2000 - 2001 (BR/BE) Ram Truck 2000 - 2001 (DN) Durango

NOTE: THIS BULLETIN APPLIES TO VEHICLES EQUIPPED WITH A 46RE TRANSMISSION BUILT BEFORE AUGUST 01, 2000 (MDH O8O1XX).

SYMPTOM/CONDITION:
The customer may complain of a Malfunction Indicator Lamp (MIL) illumination. Upon further analysis, it is determined that the MIL is caused by Diagnostic Trouble Code (DTC) P1740 - Torque Converter Clutch (TCC) or overdrive solenoid Performance. Other than the MIL, the customer may not notice any other condition with the transmission.

This condition may be caused by an intermittent and momentary TCC disengagement condition. The transmission valve body pressure boost valve cover plate has been revised with a larger size orifice hole to address this condition.

NOTE: THE DRB III(R) MUST BE OPERATING AT RELEASE LEVEL 50.4 MDS2 SYSTEM CIS CD2067 OR HIGHER (AVAILABLE THE WEEK OF OCTOBER 2, 2000) IN ORDER TO PERFORM THE REVISED TORQUE CONVERTER CLUTCH STALL TEST. DO NOT USE EARLIER VERSION STALL TEST TO DETERMINE CONDITION OF THE TORQUE CONVERTER CLUTCH.

Here can find the test in pdf format: 2009-11-28_034958_1124.pdf

Hope helps.

Apr 28, 2011 | Dodge Ram 3500 Cars & Trucks

1 Answer

MIL LIGHT IS ON


Scanned the PCM to know excatly what error code in there; with this "number" could send additional details.

Sep 12, 2010 | 2005 Dodge Durango

1 Answer

What is a p0307 code on a dodge truck 1500 5.7 hemi 2004 the truck is missing on one cyl.


P0301-P0308....2T catalyst........2004-05 Ram...Cylinder 1-8 Misfire Detected Conditions: Any time engine is running and the adaptive numerator has been successfully updated. When more than 1.5% (300M, Magnum), 2% (Durango, Ram), 2.5% (Durango LEV, Ram LEV), misfire rate is measured during 2 trips, or with 10-30% misfire during 1 trip. 3 good trips required to turn off MIL. Possible Causes: ASD relay output 2 circuit fault Injector control 1 circuit fault Coil control 1 circuit fault Ignition wiring, spark plug, or ignition coil fault Fuel pump inlet strainer plugged Restricted fuel supply line Fuel pump module fault Fuel pressure leakdown fault Fuel injector is damaged or has failed Engine mechanical problems exist PCM has failed. Hope this helps you. Thank You for using fixya.If you like this solution please rate it....Thank You, iluv2fish....Ray

Jun 24, 2010 | 2004 Dodge Ram 1500

Not finding what you are looking for?
2001 Dodge Durango Logo

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...