Question about 1995 Mercury Sable

1 Answer

1995 Sable when ignition switch turned off, engine still runs and everything keeps working. ignition switch was changed; still has problem

Posted by on

  • Clint Smock
    Clint Smock Jul 13, 2010

    Sounds like something is backfeeding the ignition circuit. Have you wired in any aftermarket devices or had anyone do any creative wiring? Like "Bypassing something"

  • jlee_m Jul 14, 2010

    thanx for your response. nothing added or nothing bypassed

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

You said you changed the ignition switch. You changed the switch or the ignition lock cylinder? I've seen cars also do this after a remote starter has been installed but you said you nothing like that on your car.

Posted on Jul 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My key won't turn to start my car... It's a 92 Sable Mercury.


Try a lubricant.

Mercury Sable key ? Mile High Locksmith ™

www.denver-locksmith.net/2013/12/mercury-sable-key-replacement/
Dec 23, 2013 - Mercury Sable keys have changed over the years. ... 1991, 1992, 1993, 1994, or 1995, then your car requires two keys. ... If your Mercury Sable was made in the year 1997, then some of the cars will have a transponder key, and some won't. ...Insert the new key into your ignition switch and turn it to the on .

Sep 08, 2015 | Mercury Sable Cars & Trucks

Tip

Buick service light 1991-01


LeSabre,
Park Avenue


2000-01

Turn the ignition to ON. Press the GAUGE INFO button on the driver information center (DIC) switch to view OIL LIFE INDEX. Press and hold the RESET button on the DIC until the display reads OIL LIFE INDEX 100% NORMAL. The engine oil life monitor is now reset. Turn the ignition OFF.



Park Avenue


1997-99

When "OIL LIFE INDEX CHANGE OIL" appears in the Driver Information Center, press and hold the "RESET" button while the oil life index is being displayed. After 5 seconds, the oil life will change to 100%



Le Sabre,
Park Avenue


1995-99
1995-96

When "CHANGE OIL SOON" light is illuminated, access the reset button in the glove box. With the engine off and the ignition switch in the run position, press and hold the button for at least 5 seconds. The light will flash four times and then go out.



Century,
Regal,
Roadmaster


1997-01,
1996-01,
1995-96.

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Fully depress and release the accelerator pedal three times within 5 seconds. The light will flash twice and go out.



Roadmaster


1994

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Access the reset button on the end of the instrument panel by the fuse block. Press the switch and hold it for at least 5 seconds.



Le Sabre,
Park Avenue


1992-94,
1991-94

When "CHANGE OIL SOON" light is illuminated, find the hole in the underside of the dash on the passenger side near the door. Insert a blunt instrument into the hole and press the switch. The light will flash four times when the system is reset.











on Dec 07, 2009 | Buick LeSabre Cars & Trucks

1 Answer

1995 mercury sable no fire from ignition coil


MAke sure its in park( just move it though the gear shifts) sometimes the neutral switch gets sloppy age/usage/transmission swap etc. Check for voltage at the coil positive terminal when the ignition key is on. YES there is voltage, the problem is on the trigger side of the coil (pickup, crank sensor, ignition module or primary wiring circuit). If there is NO voltage at the coil, the problem is on the supply side (the ignition switch or ignition wiring circuit). Check Relays and Fuses.

Mar 08, 2013 | 1995 Mercury Sable

1 Answer

Where is the solenoid switch located?


Engine side of the master cylinder you'll see a round 4pin connector with a flat top open it and make sure your connections are good

Nov 13, 2012 | 1995 Mercury Grand Marquis

3 Answers

I have a 1995 Mercury Sable GS, recently, when we turn off the key, the cooling fan continues to run. I have replaced the fan over a year ago, and have had other work done to it. according to the manual,...


under the hood there are two 30 amp relays, one is for the fan the other is for the a/c fan, swap them and see if corrects the problem, if it does then the relay is bad. Hope this helped Tim

Mar 28, 2011 | 1995 Mercury Sable

1 Answer

I acnnot find how to reset the oil change required indicator light on my 2008 Mercury Sable


The following procedure will reset your oil change light. Thank you for using Fixya!

2008-2010 Sable
  1. Turn the ignition to run (one position before starting engine).
  2. Press and release SETUP to display "OIL LIFE XXX% HOLD RESET = NEW".
  3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Mar 04, 2011 | 2008 Mercury Sable

2 Answers

Where is the ignition control module located on a 1995 mercury sable 3.0 v6


For 1995 Mercury Sable 3.0L EFI 6cyl the Control Module-Ignition is located: Under hood, center, upper engine area, mounted on side of distributor.

Hope helps (remember rated this).

Aug 11, 2010 | 1995 Mercury Sable

2 Answers

Ignition switch in a 1995 ford taurus


Ignition Lock Cylinder
Ford Taurus/Sable 1986-1995 Repair Information grey_line.gif

clearpixel_002.gif clearpixel_002.gif lower_right.gif

clearpixel_002.gif

REMOVAL & INSTALLATION

Functional Lock


The following procedure applies to vehicles that have functional lock cylinders. Such cylinders either have a key available or known key numbers from which a key can be made.
  1. Disconnect the negative battery cable.
  2. Turn the lock cylinder key to the RUN position.
  3. Using a 1/8 in. (3mm) diameter wire pin or a small drift, depress the lock cylinder retaining pin through the access hole in the upper steering column shroud (under the ignition lock cylinder) while pulling out on the lock cylinder. Remove the lock cylinder from the column.

Using the key, turn the ignition lock cylinder to the RUN position, then depress the retaining pin using a wire pin or small drift

To install:
  1. Install the lock cylinder by turning it to the RUN position and depressing the retaining pin. Insert the lock cylinder into its housing. Make sure the cylinder is fully seated and aligned in the interlocking washer before turning the key to the OFF position. This will permit the cylinder retaining pin to extend into the cylinder housing.
  2. Rotate the lock cylinder using the lock cylinder key, to ensure correct mechanical operation in all positions.
  3. Connect the negative battery cable.

Non-Functional Lock
The following procedure applies to vehicles in which the ignition lock is inoperative and the lock cylinder cannot be rotated due to a lost or broken key, unknown key number or a lock cylinder cap that has been damaged and/or broken to the extent that the lock cylinder cannot be rotated.

Jan 27, 2009 | 1995 Ford Taurus

2 Answers

1995 mercury sable GS 3.8L ignition problems?


How do you change an ignition cylinder on a 1995 Murcury Sabel ? .

Jun 22, 2008 | 1995 Mercury Sable

Not finding what you are looking for?
1995 Mercury Sable Logo

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...