Question about Cars & Trucks

1 Answer

Need to find location of the filler plug on the transmission

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 68 Answers

Need to be more specific of year make and model you have to help.

Posted on Jul 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello / I have a car maintenance workshop Question / How change Automatic oil gerbox Renault Megane 2005 Thank you


You need to get under the car, identify the transmission oil pan and look for the drain plug:


26062649-yytlcu2b3evmxr44xdn3gosb-1-0.jpg Place a large plastic dish beneath the drain plug and the undo the plug. Allow the old fluid to drain into the dish. Replace the drain plug.

Locate the filler plug - it will be on the side of the transmission, higher up. Use bottles with spouts to fill with the correct amount of transmission fluid .. or .. possible .. fill with fresh transmission fluid via the transmission dipstick.



26062649-yytlcu2b3evmxr44xdn3gosb-1-1.jpeg The filler plug

Jan 21, 2016 | Renault Cars & Trucks

1 Answer

Locate the filler plug for transmission oil


Most times transmission & engine oil are all together, NO FILLER PLUG for Transmission Oil. Automatic Engine have separate filler plug for Transmission Oil. To get at Transmission filler , car needs to be on a RAMP. It would help if you mentioned Make & Model of Car !

Feb 24, 2015 | Cars & Trucks

1 Answer

Find the filler plug for a 2004 chrysler sebring front differrential


The Sebring is a front wheel drive car. The transmission drives the two axles directly. You only need to check your transmission fluid. There is no differential like a rear axle style unit.

Jan 13, 2015 | 2004 Chrysler Sebring

1 Answer

Can't locate filler plug on 1996 Nissan pickup standard transmission


Manual trans fluid is checked by removing the fill plug located on the transmission on the driver's side. it is a 1/2" square drive flush mounted plug.

Aug 23, 2012 | 1996 Nissan Pickup

1 Answer

Adding transmission fluid


Found this on wiki answers

There is no dipstick on the Malibu transmission. To correctly check fluid level, you must locate the filler cap and the drain plug on the transmission. The filler cap is a red cap located on the drivers side of the transmission between the air filter box and exhaust crossover pipe, almost under the crossover pipe. The drain plug is located on the passengers side of the transmission, just behind where the axle connects to the transmission. It has an 11mm head and can be seen if you lay in front of the passengers front tire, look about 3 inches above the transmission pan. Once you have located these, warm the transmission to normal operating temperature, and with the car running, transmission in park, and the car sitting level, slowley remove the drain plug, have a drain pan under the plug in case any fluid comes out. There should be very little fluid coming out, if there is none coming out re-install the plug, remove the filler cap and put 1/2 quart of fluid in, now run the transmission thru all the gears and back to park. Put the drain pan under the plug and remove the plug, if it is overfull, let it drain until it stops, if it still doesn't have fluid coming out, add 1/2 quart at a time until it does, following the above procedure. Make sure you let any excess fluid drain out and re-install the plug. As noted above, make sure the car is running while checking the fluid. I know it seems complicated but it isn't as bad as it sounds. This same procedure applies to all Chevy Malibus from about 1997 until 2004 if I'm not mistaken.

Apr 04, 2012 | 2003 Chevrolet Malibu

2 Answers

I cannot locate the drain and filler plug for the maunal transmission 5speed of '97 corolla. Can anyone help


Hi Geoffrey,

Corolla '97 manual transmission using bolt 10mm ( hex) as filler plug and bolt 24 mm ( shallow socket) as drain plug transmission oil. Both bolts located on engine side ( and are not on top or bottom of your engine).

They just located on engine behind your radiator and beside your battery ( lower side). It is easier to acess them from bottom of engine. Their are on your gearbox.

Regards

Sep 20, 2011 | 1997 Toyota Corolla

1 Answer

Where do I check my transmisson fluid?


Fluid Level Checking Procedure for all Transmissions without a Dipstick:

  1. The transmission temperature must be between 30°C and 50°C before checking can begin. Use the DIS or the MODIC to determine the transmission temperature.
  2. The vehicle must be level and without load. With the engine running, switch on the air conditioning. This will increase the idle speed and ensure that all oil passages in the transmission are filled with oil.
  3. Step on the brake firmly, apply parking brake fully and move the selector lever through each gear position, pausing briefly in each gear.
  4. With the engine running and the selector lever in Park position, remove the filler plug located on the transmission (see picture for location). If a small stream of oil runs out, the fluid level is correct.
  5. If no oil runs out when the filler plug is removed, the fluid level is too low. Add oil until it starts to overflow.
  6. With the engine running, reinstall the oil filler plug and tighten to proper torque. (Refer to section below for proper tightening torque)
#1 is the drain and #2 is the filler


360dreamworx_5.jpg

Jul 31, 2011 | 1996 BMW Z3 Roadster

1 Answer

Need to put transmission fluid on my its stick


there are 2 bolts on the transmission underside that are not connecting anything to the trans. itself. One is a drain plug at the bottom, the other is a filler plug on the side. remove filler plug and pump in fluid until it starts to leak out from the filler hole, re-install filler plug and you are all done.

Jan 20, 2010 | 1997 GMC Sierra

2 Answers

I need to check my transmission fluid on my explorer 2002 dont know where is the filler plug is located at


The filler plug is in the transmission pan. You have to check it while it is running and warm. Using a t30 torx bit ,removed scew. If fluid is pouring out it is full, if it trickles out or nothing at all. It needs to be filled. Good luck. I hope this helps.

Jul 18, 2009 | 2002 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...