Question about 2004 Ford F350
If this vehicle has a 6.0 diesel then your crank sensor is on driver,s side at front of engine right at power steering pump or behind it difficult to reach but have replaced on f-450 ambulance in the parking lot one 8mm bolt holding it in unplug connector remove bolt twist and pull out on sensor at same time to get o-ring on sensor to slide the sensor is about the size of a #2 pencil and very long when slid out put little oil or grease on o-ring of new sensor and slide back in install bolt hook up connector and done
Posted on Jul 13, 2010
I have F350 6.0 diesel turbo.I have a celebration problem. There is a sensor on the brake pedal. Called a throttle sensor. I replaced it. And it went bad again they say. It can start up the trough and push down on the throttle and the truck goes nowhere shut it off turn it back on and it will go for a while. The codes come up showing the pedal is bad. Replacing these battles are very expensive $1000 apiece. There is more than one sensor for the throttle. Every place I take into a tell me the same thing. I really don't know what else to do. I just had ERG removed hopefully. This will help ideas or if anyone had this problem what was it.
Posted on Mar 28, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 27, 2016 | Lexus Cars & Trucks
Dec 13, 2015 | 2006 Nissan Sentra
Dec 11, 2015 | Jaguar Cars & Trucks
Feb 17, 2015 | Nissan Cars & Trucks
Jun 22, 2014 | 2004 Chevrolet Malibu
Crankshaft Position Sensor Operation?
Replace Camshaft position sensor and Crankshaft Position Sensor? http://technoanswers.blogspot.in/2012/06/2005-dodge-durango-replace-camshaft.html
GMC Crankshaft Position (CKP) Sensor Replacing? http://schematicsdiagram.blogspot.com/2011/12/gmc-crankshaft-position-ckp-sensor.html
These details will help.
Nov 25, 2012 | 2000 Cadillac Escalade
Feb 27, 2011 | Jeep Grand Cherokee Cars & Trucks
Nov 03, 2009 | 1994 Hyundai Sonata
Oct 23, 2009 | 2004 Audi A4
Sep 06, 2008 | 2003 Mitsubishi Galant
Jul 06, 2014 | 2004 Ford F350
219 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: