Question about 2006 Chrysler Pacifica
I have a major problem with my Chrysler Pacifica 2006. My engine started lately to have alteration of ReVs. It happens must of the time when the engine is still cold or when I'm stop at a light. The major problem is that my engine started to stall when I'm stock in traffic or when I'm waiting for a green light>
Do you have any ideas why this is happening........ is it possible that my O2 sensors are the cause of all this. It seems to be worse during raining days.
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: OBD-II reads DTC P0305
DTC P0305 means Misfire Detected, Cylinder No. 5
Since this is the problem then you should let Chrysler handle the problem.
You can also confirm this at http://www.troublecodes.net/chrysler/
Posted on Jul 30, 2009
2001 Chrysler Town and Country- Won't start. Turn over. It acts like the fuel is not getting to the engine. After many attempts , it starts and runs like there are no problems. The car has 120,000 and has never had a problem. Is the fule pump bad?
Posted on Aug 17, 2009
HAVE SEEN THIS BEFORE AND THE STARTER HAS BEEN THE CULPRIT..HAVE NEVER REPLACED A FUEL PUMP ON ONE OF THESE VEHICLES AT ALL
Posted on Aug 31, 2009
Testimonial: "I replaced the starter. This job is quite substantial. Also found the nut connecting the cable to the starter coil was not tight. I think it is fixed."
Before you tear apart and replace the whole car like I did, you have THREE converters on that car. The front two are part of the y-pipe and one on center pipe. Vacuum check when hot or look under it in the dark after running about twenty minutes, any glowing red in converter. you need to clean or replace. vinegar and distilled water soaking, it can be done, will help clean the y-pipe one, the other is 75 bucks aftermarket and worth the change.
Posted on Sep 21, 2009
Hello, the answer to solve this problem is to take it to your nearest chrysler dealer and have them re-flash the updates to the ecu....since 2004, chrysler has had about 4-5 new updates since the date they were manufactured....you need to have the update that followed from your date of man. on your vehicle....They attempted to flash mine to the latest update and didnt work, turns out that they need the re-flash from back when...in order to get the gauage to stop fluctuating.....Hope this helps!!
Posted on Sep 21, 2009
Tips for a great answer:
Sep 16, 2014 | 2006 Chrysler Pacifica
Nov 13, 2013 | 2006 Chrysler Pacifica Touring
Nov 24, 2012 | 2006 Chrysler Pacifica
Jul 22, 2012 | 2006 Chrysler Pacifica
May 03, 2012 | 2006 Chrysler Pacifica
Feb 11, 2011 | 2006 Chrysler Pacifica
Dec 16, 2010 | 2004 Chrysler Pacifica
Oct 29, 2010 | 2006 Chrysler Pacifica
76 people viewed this question
Usually answered in minutes!