Question about 1999 Jeep Cherokee

1 Answer

I'm looking for the cable wheel that makes the car horn sound inside the steering wheel for a 1999 jeep cherokee

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Contributor
  • 245 Answers

Part you need is called a clock spring this is a dealer only part
you will need to remove the airbage and steering wheel to do this
Once wheel is off you will need to remove 3 torkx screws to remove the clock spring reverse to install everything
If your not experiencecd in this i recomend taking it to a ase shop

Posted on Jul 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Witch fuse should be pulled on 1999 jeep to stop horn from blowing


Your owners manual will show you exactly where it is...However it is easy to disconnect the horn...You desperately need a horn for safety reasons to avoid a crash...Especially if your state has a safety inspection requirement...Your fuse panel should also have the fuses numbered and a sticker inside the fuse box cover stating which fuse goes to horn....Also you can wear safety glasses and disconnect the battery to avoid air bag explosion..Remove steering wheel center cover where the horn is pressed...,You will see a small wire attached to the cover and to the prong inside steering wheel...It could be loose or disconnected.....If not just disconnect the wire and black tape the terminal end ..Then the horn is disconnected...

Feb 20, 2015 | 1999 Jeep Cherokee 4WD

1 Answer

My horn blows when i make left turns. what is going on


The horn pad or the clock spring in the steering column is shorting to ground. The clock spring is the device that allows contacts in the steering wheel to move in circles.

Sep 20, 2012 | 1999 Jeep Grand Cherokee

1 Answer

Brake Booster Removal - 1999 Jeep Cherokee Classic 4.0L


use a swivel socket or look above the firewall on the inside and look for a bolt or ujoint that will undo so u can slide it up and out of the way

Sep 08, 2012 | 1999 Jeep Cherokee

1 Answer

I have a '93 jeep cherokee and my horn doesn't work. I've checked the fuse and it's fine but now i don't know where to locate the horn itself to check for disconnections or to replace...


LOOK UNDER THE LOWER AIR DEFLECTOR FROM BELOW THE RADIATOR. IF YOU HOT WIRE CAR HORN AND IT WORKS.YOU HAVE TO REPLACE THE WHOLE AIRBAG IN STEERING WITH HORN CONTROL BUTTONS.YOU NEED TO DISABLE AIRBAG IN STEERING WHEEL WHEN REPLACING AIRBAG AND HORN CONTROL BUTTON PAD.JUST TURN OFF RADIO FIRST, THEN DISCONNECT REMOVE THE NEGATIVE BATTERY CABLE.WAIT 20 MINUTES BEFORE WORKING ON AIRBAG AND HORN PAD IN THE STEERING WHEEL.

Aug 12, 2011 | Jeep Cherokee Cars & Trucks

1 Answer

OBD11tech thinks I have a bad clock spring on my 1999 jeep cherokee classic due to my horn not working & the air bag light stays on. Where is the clock spring & how do I change it?


it's inside the steering wheel
must be careful, because of the air bag.
disconnect the battery and wait for 10 minutes for the air bag capacitor to discharge power.
remove the air bag module from the steering wheel
remove the center nut, then steering wheel
the clock pring is a yellow round piece that fitted inside the steering column. there is a snap ring hold the clock spring in place. disconnect the wiring then remove the clock spring.

Feb 28, 2010 | 1999 Jeep Grand Cherokee

2 Answers

Horn does not work, does not make any sound


In most cases this problem is caused by the rotating ribbon circuit contact under the steering wheel having a broken filament, the part is known as a clock spring contact, u will need to properly disarm the airbag and remove the steering wheel to access the part. WARNING: Failure to follow factory Airbag disarming protocol can result in an unexpected Airbag deployment and possible serious personnel injury

Feb 22, 2010 | 1999 Jeep Cherokee

1 Answer

Horn, cruise control, and radio controls on steering wheel do not work ?


The clockspring behind the steering wheel is possibly defective or unplugged. It is the one and only component that all of your symptoms have in common.

Apr 27, 2009 | 1999 Jeep Grand Cherokee

2 Answers

How to fix horn on 1999 jeep cherokee sport


mary, have you checked the contacts on the stearing wheel....maybe?

Jan 02, 2009 | 1999 Jeep Cherokee

Not finding what you are looking for?
1999 Jeep Cherokee Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...